1. everything RF
  2. RF Newsletters
more
PREV 4 February, 2015 NEXT

New RF & MW Products this Week

4 Feb, 2015 - everything RF Newsletter
 
everything RF
Date: 4 Feb, 2015
 
New & Improved everything RF
 
 
 
New Products this week
RF Amplifier
1 kW Solid State Pulsed Power Amplifier from 9 to 9.8 GHz

RF Amplifier from API Technologies

The QBS-609 is a pulsed power GaN power amplifier that operates from 9 to 9.8 GHz. This solid state amplifier has been designed to replace traveling tube modules in the X-Band. It has been developed for Military and Commercial Radar Applications. The amplifier has a high efficiency of 20% with a 100 usec pulse width and 10% duty cycle. The amplifier requires a 28 V supply and provides a gain of over 60 dB.
 
Download Datasheet | Product Details
 
RF Amplifier
L-Band GaN Amplifier for Pulsed Radar Applications

RF Amplifier from MACOM

The MAMG-001214-090PSM can provide output power of more than 90 W, has a gain of 30 dB and PAE of 60 %. It has a flexible design that allows for gate or/and drain pulsing and includes a gate voltage sense port.
 
Download Datasheet | Product Details
 
RF Amplifier
8000 Watt X-Band Power Amplifier from 8 to 11 GHz

RF Amplifier from Hittite

The KHPA-0811 can be used for commercial and military radars, electronic warfare and test & measurement. The amplifier has an output saturated power of 8000 W, with a rise/fall time of 200 nsec, pulse width of 0.05 to 100 usec and a 20% duty cycle.
 
Download Datasheet | Product Details
 
RF Amplifier
17 to 27 GHz Low Noise Amplifier Die

RF Amplifier from Custom MMIC

The CMD163 is ideally suited for military and space applications, as well as point-to-point and point-to-multipoint communication systems where small die size and high linearity are needed. It has a gain of 24 dB, noise figure of less than 1.3 dB, and P1dB of +9 dBm across the band.
 
Download Datasheet | Product Details
 
RF Amplifier
16 to 18 GHz Power Amplifier for Radar & SATCOM

RF Amplifier from Triquint

The TGA2621 from TriQuint is a GaAs power amplifier that operates from 16 to 18 GHz. It provides 1 W of saturated output power with an efficiency of 28% PAE and has a small signal gain of 26.5 dB. It is internally matched to 50 Ohms allowing for simple system integration. It requires a 6V supply to operate.
 
Download Datasheet | Product Details
 
RF Amplifier
0.4 to 3 GHz Low Noise Amplifier in Rugged Chassis

RF Amplifier from Mini Circuits

The ZX60-P33ULN+ has a high IP3 and is available in a rugged cost effective unibody chassis. It can be used for a wide range of applications including Radar, LTE, GPS, GSM and other standards in its frequency band. The amplifier is matched to 50 ohms at the input and output.
 
Download Datasheet | Product Details
 
Front End Module
Front End Module for Bluetooth Low Energy Applications

Front End Module from Skyworks

The SKY66111-11 a Front End module which consists of a Tx Amplifier, Antenna Tx/Rx switch with an Rx Bypass capacitor. It provides an output power of 10 dBm, requires 1.8 to 5 V for operation and has a low sleep current.
 
Download Datasheet | Product Details
 
RF Amplifier
700 MHz to 2.7 GHz Low Noise Amplifier for Small Cells and Infrastructure Applications

RF Amplifier from Guerrilla RF

The GRF2104 is a broadband Low Noise Amplifier for small cells and infrastructure applications. It operates from 700 MHz to 2.7 GHz with a gain of 19.9 dB and noise figure of 0.45 dB. The amplifier has an IP3 of 13.5 dBm, P1dB of 2 dBm and requires a 3.3V supply.
 
Download Datasheet | Product Details
 
Transceiver
76 to 77 GHz W-Band FMCW Radar Front End

Transceiver from Sivers IMA

The RS3400W/04 is a W-band (76 to 77 GHz) FMCW radar front end featuring synthesized frequency sweeps. A fast sweep mode enables complete sweeps below 1ms. The system provides one Tx/Rx with a WR12 waveguide interface suitable for attaching compact high directivity antennas.
 
Download Datasheet | Product Details
 
Switch Matrix
50 MHz to 2500 MHz 16 x 16 Switch Matrix/Router

Switch Matrix from ETL Systems

The VTR-70 Series is a 16 x 16 Switch Matrix/Router that operates from 50 MHz to 2500 MHz. This matrix has been designed to operate in the L-band and is ideal for TVRo, satellite ground stations and RF distribution applications. It is available in a 1U high chassis with control option on the front panel.
 
Download Datasheet | Product Details
 
RF Switch
UltraCMOS SP4T Tuning Switch from 100 to 3000 MHz

RF Switch from Peregrine Semiconductor

The PE613050 is built on Peregrine’s UltraCMOS technology and supports a wide variety of tuning circuit topologies with emphasis on impedance matching and aperture tuning applications.With two-pin low voltage CMOS control, all decoding and biasing is integrated on-chip and no external bypassing or filtering components are required.
 
Download Datasheet | Product Details
 
Surface Mount Circulator
Surface Mount Circulator for X-Band Applications

Surface Mount Circulator from Renaissance Electronics Corporation

The 3SMH8NF operates from 9300 to 9500 MHz with an insertion loss of 0.35 dB and Isolation of over 20 dB. The circulator can handle up to 10 Watts of CW power and 150 Watts of peak power. The circulator can be used for high reliability application and for earth/airborne systems.
 
Download Datasheet | Product Details
 
RF Connector
N Type Connector from DC to 11 GHz for Commercial and Military Applications

RF Connector from Delta Electronics Manufacturing Corp.

The 1103018A00E-000 from Delta Electronics Manufacturing Corp. is an N Type connector designed for commercial and military applications including flight requirements. It operates from DC to 11 GHz and has a voltage rating of 1,000 VRMS SSL.
 
Download Datasheet | Product Details
 
Power Divider
2 Way 50 GHz Wilkinson Power Divider/Combiner

Power Divider from Marki Microwave

The PD-0150 from Marki Microwave is a two way divider/combiner has an isolation of 20 dB, insertion loss of 5 dB and a VSWR of 1.6:1 max. It can handle up to 1 W of power and is available as a module with 2.4 mm female connectors.
 
Download Datasheet | Product Details
 
XO
Crystal Oscillator with Exceptional Jitter Performance

XO from Integrated Device Technology

The XU Family are offered in LVPECL, LVDS, LVCMOS, HSCL and HCMOS versions, with operating voltages of 1.8 V, 2.5 V or 3.3 V. The family has a RMS phase jitter (12kHz to 20 MHz) of 750 fs typical that reduces overall system noise and meets next-generation networking and communications requirements.
 
Download Datasheet | Product Details
 
XO
Crystal Oscillator with Exceptional Jitter Performance

XO from Integrated Device Technology

The XL Family are offered in LVPECL, LVDS and HCMOS versions, with operating voltages of 3.3 V or 2.5 V. The family has a RMS phase jitter (12kHz to 20 MHz) of 750 fs typical that reduces overall system noise and meets next-generation networking and communications requirements.
 
Download Datasheet | Product Details
 
VCXO
Low Phase Noise VCXO Operates up to 100 MHz

VCXO from KVG Quartz Crystal Technology GmbH

The VCXO-V7XXX-LF provides sine wave output signal at output level of more than 10 dBm with a supply of 12 V. It has a modulation bandwidth of more than 1 kHz at -3 dB cut off frequency and draws less than 30 mA of current. The VCXO has a phase noise of less than -175 dBc/Hz at 100 kHz.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.