1. everything RF
  2. RF Newsletters
more
PREV 11 February, 2015 NEXT

New RF & Microwave Products this Week

11 Feb, 2015 - everything RF Newsletter
 
everything RF
Date: 11 Feb, 2015
 
Sponsored by Aeroflex / Inmet
 
 
 
New RF Products this Week
RF Switch
SPDT RF SOI Switch from from 10 MHz to 40 GHz

RF Switch from Peregrine Semiconductor

The PE42524 is a SPDT RF switch die based on Peregrine's UltraCMOS RF SOI process. It supports a wide frequency range from 10 MHz to 40 GHz and delivers exceptionally high port-to-port isolation, low insertion loss and excellent linearity. It has a fast switching time of 225 nanoseconds, a fast settling time of 840 nanoseconds and a high ESD rating of 2000V HBM on all pins.
 
Download Datasheet | Product Details
 
Power Divider
4 Way Radial Power Divider/Combiner from 700 to 4200 MHz

Power Divider from Werlatone Inc

The D10119 from Werlatone is a 4-Way Radial combiner/divider that operates from 700 to 4200 MHz. It has an insertion loss of 0.3 dB, a VSWR of 1.35:1 and a phase balance ± 6° max. The divider can handle up to 2000 W CW of power and is available with N Type Female, SMA and BNC connectors.
 
Download Datasheet | Product Details
 
Band Pass Filter
LTE Tx / Rx Filter with LowDrift BAW Technology at 2580 MHz

Band Pass Filter from Qorvo

The TQQ0041E from Qorvo is a LowDrift Rx filter (BAW) that operates at 2580 MHz with a 196 MHz bandwidth. It has been designed to meet the strict LTE rejection requirements for use in the B41 band. The filter has a low insertion loss of 3.2 dB over its full bandwidth and has an excellent WiFi rejection.
 
Product Details
 
Band Pass Filter
2.4 GHz WiFi LTE Co-Existence BAW Filter

Band Pass Filter from Qorvo

The 885070 is a 2437 MHz BAW Filter for WLAN Access Points and small cell applications. It has a 69 MHz bandwidth and enables the coexistence of 4G (LTE/TD-LTE) & Wifi signals. It can also be used for ISM band applications and mobile hotspots. The filter can handle up to 1 Watt of power.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
20 Hz to 40 GHz High Performance Signal/Spectrum Analyzer

RF Spectrum Analyzer from Rohde & Schwarz

The R&S FSQ Signal Analyzers are high-end, high performance analyzers that operate from 20 Hz to 40 GHz (3.6/8/26.5/40 GHz Models available). It has a very low phase noise, low residual EVM, a wide dynamic range and above-average accuracy, making it the ideal high-end measuring instrument for development applications, where tolerances and limit values must often be lower than defined in a standard.
 
Download Datasheet | Product Details
 
Sponsored by Aeroflex / Inmet
Aeroflex / Inmet
Meet the New Magic Number for 2 Watt Temperature Variable Attenuators
Push the limits of frequency without sacrificing performance. Aeroflex/Inmet’s new DC to 12 GHz Powerfilm surface mount attenuators vary with temperature and are the perfect balance of price, power, and dependability.To learn more, download the data sheet.
 
 
 
RF Spectrum Analyzer
9 KHz to 7.5 GHz Compact Spectrum Analyzers based on Digital IF Design

RF Spectrum Analyzer from RIGOL Technologies

The DSA800 Series compact and lightweight spectrum analyzers that operate from 9 kHz to 7.5 GHz (1.5 GHz & 3.2 GHz also available). The analyzer adopts a digital IF design that gives it the ability to measure smaller signals and distinguish between small signals by frequency. The IF design enables smaller bandwidth settings which reduce the displayed average noise level.
 
Download Datasheet | Product Details
 
Signal Generator
54 MHz to 13.6 GHz USB Signal Generator (Dual Channel)

Signal Generator from Windfreak Technologies

The SynthHD from Windfreak Technologies is a dual channel software tunable RF Signal Generator and frequency sweeper that operates from 54 MHz to 13.6 GHz. It is controlled and powered by a device running Windows or Android via USB port. The generator has two independent channels can be configured to run as two different frequencies, or the same frequency with different phases.
 
Download Datasheet | Product Details
 
Vector Network Analyzer
2 Port Single Path Compact VNA from 20 kHz to 4.8 GHz

Vector Network Analyzer from Copper Mountain Technologies

The TR5048 is a compact 2 Port VNA that operates up to 4.8 GHz. It has a 120 dB dynamic range and can be operated with any Windows PC or laptop. Its small size makes it easy to carry around to test sites or to share within a team. In addition to S parameters (S11, S21) this VNA has a variety of analysis capabilities, including time-domain with gating and frequency offset modes.
 
Download Datasheet | Product Details
 
Vector Network Analyzer
26.5 GHz Microwave Handheld Combination Analyzer

Vector Network Analyzer from Keysight Technologies

The N9918A is a FieldFox Handheld microwave combination analyzer that consists of a Cable & Antenna Analyzer, Vector Network Analyzer, Spectrum Analyzer, Independant Source, Voltmeter and can do power and pulse measurements. This handheld analyzer operates up to 26.5 GHz and can be remote controlled via an iPad or iPhone. It only weighs 3 Kg and is available with a 3 Year warranty.
 
Download Datasheet | Product Details
 
RF Power Meter
The 4540 Series consists of the 4541 (1 Ch) and 4542 (2 Ch) combined Peak / Average Power and Voltage meters

RF Power Meter from Boonton

The Boonton 4540 Series RF Power Meter is the instrument of choice for capturing, displaying and analyzing RF signals. Applications include pulsed RF signals like RAdAR or gSM based technologies, as well as pseudorandom, noise-like signals such as CDMA, ECDO, WLAN, WiMAX, UMTS, HSPA, LTE, OFDM or HDTV. The 4540 Series offers Pulse, Modulated/CW, and Statistical operating modes, making it well suited for all requirements of R&d, manufacturing and control operations.
 
Download Datasheet | Product Details
 
Surface Mount Isolator
9300 to 9500 Surface Mount Isolator

Surface Mount Isolator from Renaissance Electronics Corporation

The 2SMH8ND from Renaissance has an insertion loss of 0.35 dB, an isolation of 20 dB and a VSWR of 1.25:1. The isolator can handle up to 10 W of CW power and 150 W of peak power over a wide temperature range of -55°C to 100°C. It is ideal for earth and airborne systems as well as high reliability applications.
 
Download Datasheet | Product Details
 
Low Pass Filter
E-Band Waveguide Low Pass Filter from 71 to 86 GHz

Low Pass Filter from Spacek Labs

The Model LPF1-86-11 is an E-Band low pass waveguide filter series (WR-12). This filter has a pass band of 71 to 86 GHz with an insertion loss between 1.5 dB and 2 dB. It provides 20 dB of rejection from 91 GHz and 30 dB at 140 GHz. This waveguide filter can be customized to operate from 18 to 110 GHz with a sharp cut-off of 5%.
 
Product Details
 
RF Amplifier
2 to 98 GHz, Power Amplifier Series

RF Amplifier from SAGE Millimeter

The SBP Series are power amplifiers available in a number of configurations with different frequencies, gains (25 to 45 dB) and power levels (Up to 30 dBm P1dB). These amplifiers can be customized to your requirement. They are designed and manufactured by utilizing the most advanced discrete PHEMT or MMIC devices and thin film technologies.
 
Download Datasheet | Product Details
 
RF Amplifier
GaN 1.2 GHz Power Doubler Amplifier Supporting new DOCSIS 3.1 Cable Specification

RF Amplifier from Qorvo

The RFCM3316 is a power doubler amplifier in a multi-chip module to support the requirements of the new data over cable service interface specification (DOCSIS) 3.1. based on RFMDs GaN and allows cable operators and MSOs to easily upgrade existing CATV infrastructure to meet the power amplifier requirements of the new DOCSIS 3.1 standard, increasing effective downstream data rates from 160 Megabits per second (Mb/s) to 10 Gigabits per second (Gbit/s), and upstream data rates from 120 Mb/s to 1 Gbit/s when compared to DOCSIS 3.0.
 
Download Datasheet | Product Details
 
RF Amplifier
20 Watt Power Amplifier for Wireless Infrastructure Applications from 820 to 960 MHz

RF Amplifier from Wavelex

The WPA0810A from Wavelex is a power amplifier that operates from 820 to 960 MHz. The amplifier can provide up to 20 W of power, has a P1dB of 43 dBm and PAE of 50 %. It has infinite load VSWR protection and requires a DC supply of 30 V. It is available with SMA female connectors and can be used for GSM, mobile infrastructure and fixed wireless communication applications.
 
Download Datasheet | Product Details
 
Band Pass Filter
480 MHz Helical Resonator Filter

Band Pass Filter from Anatech Electronics

The AE480HB1381 from Anatech Electronics is a helical bandpass filter with a center frequency of 480 MHz with a 20 MHz 3 dB bandwidth. It has a low insertion loss of 2 dB, return loss of 12 dB and is matched to 50 Ohms. The filter can handle up to 1 W of power and is available in a SMT package.
 
Download Datasheet | Product Details
 
Coaxial Isolator
5W, Ka Band Space Qualified Isolator

Coaxial Isolator from DiTom Microwave

The DS1017 from Ditcom is a space qualified coaxial isolator which is ideal for Ka band applications. It operates from 27 to 31 GHz, has an isolation of 20 dB and an insertion loss of 0.6 dB. It can handle up to 5 W of average power and 30 W of peak power. It is available with 2.92 mm - Female or Male connectors.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.