Sponsored by Hilco Industrial | |
|
 New RF & Microwave Products this Week |
|
|  | Signal Generator from Aeroflex Test Solutions This digital signal generator is available in two frequency configurations SGD-3 (100 kHz to 3 GHz) and the SGD-6 (100 kHz to 6 GHz). The series has a low phase noise, supports wideband analog modulation and an has an arbitrary waveform generator making it the ideal for testing multi-channel power amplifiers and support for all forthcoming wideband wireless systems. Download Datasheet | Product Details
|
| | |
|
|  | Signal Generator from Aeroflex Test Solutions The SGA Series are Analog Signal Generators that are available in two frequency configurations - SGA-3 (100 kHz to 3 GHz) and the SGA-6 (100 kHz to 6 GHz). These analog signal generators have wide bandwidth AM, FM and Phase Modulation modes. They can provide signals with an output power of up to 13 dBm (20 dBm option also available), a low SSB phase noise of -135 dBc/Hz at 1 GHz and a fast frequency settling time of 100 us. The SGA generators are controlled from an easy to use touch screen interface. Download Datasheet | Product Details
|
| | |
|
|  | SPDT Switch from Skyworks The SKY13446-374LF is a compact SPDT antenna switch used to switch between the antenna and a Tx or Rx port. The switching is accomplished with two control voltages. It has a low insertion loss, high isolation and operates from DC to 6 GHz making it ideal for dual band WLAN systems that operate at 2.4 to 2.5 GHz and 4.9 to 5.9 GHz. The switch is available in a compact 1.5 x 1.5 mm 6 Pin Micro Leadframe dial package. Download Datasheet | Product Details
|
| | |
|
|  | RF Switch from Planar Monolithics Industries The P2T-500M18G-50-T-SFF-I from PMI RF is a terminated, SPDT switch that operates from 0.5 to 18 GHz. It can handle up to 23 dBm CW input power with a port to port isolation of over 50 dB and an insertion loss of under 2.8 dB. It has a fast switching speed of 50 n sec and is available in a module with SMA Female connectors measuring 1.0" x 1.0" x 0.5". Download Datasheet | Product Details
|
| | |
|
|  | RF Limiter from Aeroflex / Metelics The LM Series of Limiters from Aeroflex / Metelics operate from 20 MHz to 8 GHz. These are drop in high power octave band surface mount limiters optimized for S Band and C Band radar systems. The limiters can handle 100 W CW and 1 KW peak power through 8 GHz and have a flat leakage power of 20 dBm. They are available in a 8 x 5 x 2.5 mm SMT package for easy integration. Download Datasheet | Product Details
|
| | |
|
Hilco Online Auction - Powerwave Thailand | |
|
|  | 2 Way Power Divider from Anaren Inc The 4S2XXX is a series of space qualified 2 way power dividers from Anaren. These in-phase power dividers operate from 0.5 to 20 GHz and can handle up to 1 W of power with a low insertion loss and VSWR. They are available in a light weight aluminum housing with SMA or 2.92 mm connectors. The dividers can operate at a temperature from -20°C to +80°C. Download Datasheet | Product Details
|
| | |
|
|  | Waveguide Circulator from Renaissance Electronics Corporation The HMC Series of broadband ferrite waveguide circulators operates from 18 to 120 GHz. They use a low loss H Plane structure in a modified Y-junction format to provide a low loss with high isolation and bandwidth. 2 GHz bandwidths with 20 dB Isolation are standard, with wider bandwidths, higher power handling and magnetic shielding available in some products. The circulators can be used as signal duplexers on transceivers having a single antenna. Download Datasheet | Product Details
|
| | |
|
|  | Power Divider from Renaissance Electronics Corporation The 10A3NB-8S from Renaissance is a L-band tapered 8 Way power divider that operates from 1100 to 1500 MHz. It divides power from 6 to 18 dB across the output ports (18.4 dB at Ports 1&8, 12.4 dB at 2&7, 8.6 dB at 3&6 and 6.7 dB at 4&5). The divider can handle up to 350 W of peak power, 35 W CW power and is ideal for radar, communication and space constrained applications. It is available in a compact 8 x 5 x 0.5 inch package. Download Datasheet | Product Details
|
| | |
|
|  | RF Systems from Ophir RF The 5225 from Ophir RF is a solid state, broadband high power rf amplifier which operates from 80 MHz to 1000 MHz. It provides up to 200 W of power(saturated), a gain of 54 dB with a flatness of 2.5 dB. It has harmonics of -20 dBc, spurious of -60 dBc and requires 180 to 240 V of AC supply. Download Datasheet | Product Details
|
| | |
|
|  | Power Amplifier from Hittite The HMC5805LS6 from Hittite is a broadband power amplifier than operates from DC to 40 GHz. It provides a P1dB of 22 dBm, Saturated Power of 24 dBm, gain of 33 dBm and an IP3 of 33 dBm. The amplifier exhibits a slightly positive gain slope from 8 to 32 GHz, making it ideal for EW, ECM, Radar and test equipment applications. It is available in a 6 x 6 mm SMT package. Download Datasheet | Product Details
|
| | |
|
|  | GaN Amplifier from Triquint The TGA2595 is a Ka-Band GaN (Gallium Nitride) Amplifier that operates from 27 to 31 GHz with a saturated power of 10 W (40 dBm) and a gain of 17 dB. It operates on a supply voltage of 20 V with a current of 560 mA. It is available in a Die form factor. Download Datasheet | Product Details
|
| | |
|
|  | GaN Amplifier from RFHIC The RTH26007-10 is a GaN Doherty Hybrid Amplifier for 4G/LTE Small Cells that operates from 2610 to 2690 MHz. This amplifier has an efficiency of 43 % and an output power of 7 W. It has a small form factor packaged in a 28 x 19 x 6 (mm) on AIN (aluminum nitride) board which provides excellent thermal dissipation. Download Datasheet | Product Details
|
| | |
|
|  | Low Noise Amplifier from Mini Circuits The CMA-545G1+ from Mini Circuits is a Low Noise Amplifier with a high IP3 that operates from 0.4 to 2.2 GHz. It operates on a single supply voltage of 5 V and is matched internally to 50 Ohms. The amplifier is bonded to a multilayer integrated LTCC substrate and then hermetically sealed under a controlled nitrogen atmosphere with gold-plated covers and eutectic AuSn solder. The CMA-545G1+ has been tested to MIL requirements and is ideal for receiver applications. Download Datasheet | Product Details
|
| | |
|
|
|  | Signal Generator from Spartant The RSS-300 is a 3 GHz RF Signal Source from Spartant. The signal generator can be used to generate continuous wave signals with a frequency of 25 MHz to 3 GHz(1 Hz resolution). It can be controlled and powered via a USB port and is available in a compact package that measures 2.82 x 3.88 x 0.9 inches and has SMA Female. Download Datasheet | Product Details
|
| | |
|
