1. everything RF
  2. RF Newsletters
more
PREV 18 March, 2015 NEXT

New RF & Microwave Products this Week

18 March, 2015 - everything RF Newsletter
 
everything RF
Date: 18 March, 2015
 
Sponsored by Mouser
 
 
 
New RF & Microwave Products this Week
RF Power Meter
EMC & RF Power Meters from 9 kHz to 18 GHz

RF Power Meter from DARE!!

The RadiPower® are RF power meters designed for CW power measurements during EMC testing. This series of power heads can measure RF power from 9 kHz to 18 GHz. These power meters can measure CW power with a power range from -55 dBm to 10 dBm and an accuracy of 0.2 dB.
 
Download Datasheet | Product Details
 
RF Mixer
Double Balanced Passive Mixer Operates up to 65 GHz

RF Mixer from Marki Microwave

This is Marki's highest frequency mixer ever (soo far). It features a flat, smooth conversion loss from 25 to 67 GHz with a low frequency IF. The IF response extends to above 30 GHz with only 4 dB additional conversion loss. The MM1-2567LS is available in a connectorized package.
 
Download Datasheet | Product Details
 
RF Amplifier
High Efficiency GaN HEMT MMIC from 6 GHz to 12 GHz

RF Amplifier from Cree

The CMPA601C025F from Cree is a GaN HEMT MMIC amplifier that operates from 6 GHz to 12 GHz. It has a small signal gain of up to 37 dB, can provide 35 W of saturated power and requires a 28 V supply. The amplifier is housed in thermally-enhanced, 10 lead ceramic package and is matched to 50 ohms.
 
Download Datasheet | Product Details
 
Coaxial Isolator
18 GHz to 22 GHz Ka-Band Space Qualified Isolator

Coaxial Isolator from DiTom Microwave

The DS1015 from DiTom Microwave has an isolation of over 20 dB, insertion loss of 0.40 dB and a VSWR of 1.25:1. The isolator can handle up to 10 watts of forward power and up to 30 watts of peak power. It is available in a module that measures 0.50 x 0.70 x 0.50 mm and has SMA Female connectors
 
Download Datasheet | Product Details
 
Signal Generator
USB/Ethernet Controlled Miniature Signal Generators

Signal Generator from AtlanTecRF

The ASG Series of Miniature Signal Generators from AtlanTecRF operate from 25 MHz to 6 GHz. They are tuneable in 1 kHz steps and can generate an output power of up to 13 dBm, controllable in 0.1 dB steps. The output signal from these modules have excellent spectral purity with a phase noise better than -106 dBc/Hz at 1 GHz with a 100 kHz offset from the carrier.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
Analog Devices/Hittite HMC832
Mouser Carries New Phase Locked Loops Solution with Integrated Voltage Controlled Oscillator.
Analog Devices/Hittite HMC832 is designed as a 3.3V Wideband Fractional-N PLL with Integrated VCO capable of generating continuous fractional frequencies between 25MHz and 3GHz. The integrated Phase Detector and delta-sigma modulator permit wider loop-bandwidths and faster frequency tuning with excellent spectral performance. Click here to learn more.
 
 
 
Signal Generator
35 MHz to 4.4 GHz Portable Touch Screen RF Signal Generator

Signal Generator from Red Oak Canyon

The RF Pro Touch has been developed to make testing and prototyping of electronic products easier and faster. The signal generator has internal rechargeable batteries that give it 2 hours of operation time. This time can be further extended by using the battery saving options like screen blanking, auto shutoff and other power management features.
 
Download Datasheet | Product Details
 
RF Amplifier
2000 Watt Peak Power Ku-Band Antenna Mount Power Amplifier

RF Amplifier from Comtech Xicom Technology

The XTD-2000KHE from Comtech Xicom Technology is a Ku-band antenna mount power amplifier than operates from 13.75 GHz to 14.5 GHz. The amplifier provides up to 850 Watts of CW power and peak power of up Toi 1775 Watts. It has a gain of 70 dB, intermodulation distortion of -26 dBc at 755 W, noise power ratio of -19 dB at 705 W and high efficiency.
 
Download Datasheet | Product Details
 
RF Cable Assembly
Low Loss Space Qualified Cable Assemblies up to 40 GHz

RF Cable Assembly from EMC Technology & Florida RF Labs

The Lab-Flex® Q Family is a range of consistent and robust cable assemblies. These assemblies use very low loss ePTFE insulation, and constructed with materials which meet the outgassing requirements of NASA/ESA when tested per ASTM E595. These cables can handle average power up to 1800 W and are available in powered designs to meet multipaction requirements.
 
Download Datasheet | Product Details
 
RF Cable Assembly
18 GHz Low Loss Cable Assemblies for Harsh Commercial & Military Environments

RF Cable Assembly from EMC Technology & Florida RF Labs

The Lab-Flex®AF assemblies are qualified to meet the harsh environments found in commercial and military aircrafts, as well as shipboard and ground applications. The cable assemblies are constructed with a redundant water sealing system, and have been tested and proven hermetically sealed to 1 x 10-5 cm3/s.
 
Download Datasheet | Product Details
 
RF Amplifier
75 Ohm CATV Amplifier up to 1218 MHz

RF Amplifier from Qorvo

The TAT7472A1F from TriQuint contains two separate amplifiers for push pull applications. The amplifier has an enhanced gain and noise figure of less than 3 dB. The bias current set point of each amplifier is adjustable with a single resistor from the input to ground.
 
Download Datasheet | Product Details
 
RF Amplifier
27.5 GHz to 33.4 GHz 3 Stage Driver Amplifier

RF Amplifier from MACOM

The MAAM-011139 from MACOM provides a gain of up to 21 dB, an IP3 of 32 dBm and P1dB of 20 dBm. The device is internally match to 50 Ohms, requires a 4.3 V drain supply and has variable gain with an adjustable bias. It is available in a lead-free 4 mm 24 lead PQFN package.
 
Download Datasheet | Product Details
 
RF Amplifier
6 GHz to 18 GHz High Efficiency Solid State Power Amplifier

RF Amplifier from Hittite

The KHPA-0618 30WA from Hittite provides 30 watts of saturated power, has a gain of 3 dB and efficiency of 22.5%. It can also be configured for pulse capability. The amplifier requires a DC supply of 28 V and can be used for commercial radars, military radars, electronics warfare and test applications.
 
Download Datasheet | Product Details
 
Band Pass Filter
1500 MHz Banpass Filter with 117 MHz Bandwidth

Band Pass Filter from KR Electronics Inc

The 3160 from KR Electronics is a band pass filter with a center frequency of 1500 MHz and 117 MHz 3dB bandwidth. It has an insertion loss of under 2.5 dB and high stop band attenuation. The filter maintains the rejection all the way up to 9 GHz. It is matched to 50 Ohms and is available with SMA female to male connectors.
 
Download Datasheet | Product Details
 
Band Pass Filter
824 MHz to 849 MHz Cavity Band Pass Filter

Band Pass Filter from Anatech Electronics

The AB836B1180 from Anatech Electronics has an insertion loss of less than 2 dB, rejection of over 50 dB on either side of its passband and return loss of over 15 dB. The filter can handle up to 10 W of power and is available with SMA female connectors and measures 8.27 x 3.45 x 2.13 inches.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.