1. everything RF
  2. RF Newsletters
more
PREV 15 April, 2015 NEXT

Weekly Update: New RF Products

April 15, 2015 - everything RF Newsletter
 
everything RF
Date: April 15, 2015
 
New RF Products this Week
RF Switch
100 MHz to 6 GHz SPDT RF Switch AEC-Q100 Certified for Automotive Applications

RF Switch from Peregrine Semiconductor

The PE423422 is a reflective SPDT RF switch that operates from 100 MHz to 6000 MHz. It has been developed on Peregrine's UltraCMOS process and offers excellent RF performance with a low insertion loss up to 0.90 dB, a high isolation up to 44 dB and high ESD tolerance.
 
Download Datasheet | Product Details
 
RF Switch
100 Watt SPDT Reflective Pin Diode Switch

RF Switch from MACOM

The MASW-011055 from MACOM is a SPDT switch that operates from 30 MHz to 3 GHz. It has an insertion loss of 0.35 dB, an isolation of 51 dB at 2 GHz and can handle up to 100 W of CW power at a base plate temperature of 85º C. This switch is ideal for high power military and civilian radio applications requiring higher CW and pulsed power operation for land mobile radio applications.
 
Download Datasheet | Product Details
 
RF Amplifier
GaN MMIC Power Amplifier from 6 GHz to 12 GHz

RF Amplifier from Cree

The CMPA601C025D from Cree RF is a GaN Amplifier that offers greater power density and wider bandwidths compared to Si, GaAs, and GaN-on-Si transistors, including higher breakdown voltage, higher saturated electron drift velocity and higher thermal conductivity. It can be used in jamming amplifiers, test equipment amplifiers, broadband amplifiers and radar amplifiers.
 
Download Datasheet | Product Details
 
Front End Module
Multmode Multiband FEM for GSM/WCDMA and LTE Bands

Front End Module from Skyworks

The SKY78070 SkyOne multimode multiband Front End Module has been developed for 2.5G and 3G/4G handsets and operates efficiently in GSM, GPRS, EDGE, TD-SCDMA, WCDMA, HSPA, and LTE modes. It consists of a GSM800/EGSM900 PA block, a DSC1800/PCS1900 PA block, separate WCDMA blocks operating in the low and mid-bands, duplexer for bands 1, 2, 5 and 8, a logic control block for multiple power control levels, and a band enable function in both cellular and UMTS.
 
Download Datasheet | Product Details
 
Dual Directional Coupler
2 MHz to 30 MHz Dual Directional Coupler with 50 dB Coupling

Dual Directional Coupler from Innovative Power Products

The IPP-3151 from Innovative Power Products is a dual directional coupler that operates from 2 MHz to 30 MHz. It has an insertion loss of less than 0.15 dB, directivity of over 22 dB and a VSWR of 1.25:1. The coupler can handle up to 2500 W of average power and has a nominal coupling of 50.0 ± 1.5 dB. It is available in a module that measures 2 x 4 inches and has SMA/N female connectors.
 
Download Datasheet | Product Details
 
Power Divider
4 GHz to 8 GHz, 6 Way Power Divider

Power Divider from Werbel Microwave

The 6BP2 from Werbel Microwave is a 6 Way power divider that operates from 4000 MHz to 8000 MHz. It has an insertion loss up to 1 dB, isolation of 18 dB and a VSWR of 1.5:1. The splitter can handle up to 20 W of input power and is available in a module with SMA Female connectors.
 
Download Datasheet | Product Details
 
Power Divider
2 Way SMT Splitter from 5 MHz to 1200 MHz

Power Divider from MiniRF

The MRFSP5725 from MiniRF is a two way power divider that can handle up to 33 dBm of power, has an insertion loss under 1 dB and an isolation of 28 dB. It has been designed for broadband, wireless and other communications systems which require highly reliable surface mount components.
 
Download Datasheet | Product Details
 
RF Amplifier
Ka-Band 25 Watt Solid State Power Amplifier

RF Amplifier from KMIC Technology

The Ka-band SSPA from KMIC Technology operates from 30 GHz to 31 GHz. It provides an output power of 44 dBm, a gain of more than 40 dB and requires a 48 V DC Supply. It can be used in commercial and military, satellite VSAT communications, point to point data links, TWT replacement and data, voice and video transmission applications.
 
Download Datasheet | Product Details
 
Frequency Synthesizer
25 MHz to 6 GHz Rugged, Surface Mount Frequency Synthesizer

Frequency Synthesizer from SignalCore

The SC800 nanoSynth from SignalCore is a fully integrated broadband CW signal synthesizer that has a tuning range from 25 MHz to 6 GHz with a 1 Hz resolution. The synthesizer can be used in test and measurement equipment, wireless communication equipment, point-to-point and cellular infrastructure, frequency convertor local oscillator, digital data convertor clock source and network equipment applications.
 
Download Datasheet | Product Details
 
Vector Network Analyzer
2-Port Bench-top & Portable Vector Network Analyzers up to 8 GHz

Vector Network Analyzer from AWT Global

The T-Series from AWT Global are Vector Network Analyzers that are available in three frequency options - 300 kHz to 1.3 GHz, 3 GHz and 8 GHz. These VNAs have a wide dynamic range of 130 dB, noise levels less than 120 dBm and high measurement speed of 125µs per point.
 
Download Datasheet | Product Details
 
Inductor
Thru-Hole RF Inductors for Military & Aerospace Applications

Inductor from Gowanda

The MLRF19M Series of RF Inductors from Gowanda are available with inductance values from 270 uH to 1000 uH. These inductors have been developed for radio frequency applications in military, aerospace and defense communities.
 
Download Datasheet | Product Details
 
RF Amplifier
925 MHz to 960 MHz Power Amplifier for Small Cell Base Stations

RF Amplifier from Anadigics

The AWB7229 is a Power Amplifier that has been developed for small cell base station applications. It operates from 925 MHz to 960 MHz making it ideal for WCDMA / LTE Equipment Operating in Band 8. OEM's can leverage the performance of this PA to develop infrastructure solutions that consume less power, offer higher throughput, and provide greater coverage and range.
 
Product Details
 
90 Degree Hybrid Coupler
90 Degree Hybrid Coupler from 800 MHz to 2800 MHz

90 Degree Hybrid Coupler from Werlatone Inc

The QH10089 from Werlatone is a 90 degree hybrid coupler that operates from 800 MHz to 2800 MHz. It has a low insertion loss up to 0.35 dB, an isolation of 20 dB and a low amplitude balance of ±0.4 dB. It can handle up to 200 W of CW power and has a VSWR up to 1.30:1. It can be used for both military and commercial applications.
 
Download Datasheet | Product Details
 
RF Transistor
180 Watt LDMOS Transistor from 2.4 GHz to 2.5 GHz

RF Transistor from NXP Semiconductors

The BLF2425M6LS180P is an LDMOS Transistor from NXP that has been developed for ISM and for industrial heating applications. The device provides an average power of 180 W and has a gain 13.3 dB with an efficiency of 53.5 %. It requires a 28 V supply and draws 10 A of current.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.