1. everything RF
  2. RF Newsletters
more
PREV 29 April, 2015 NEXT

New RF & Microwave Products this Week

29 April, 2015 - everything RF Newsletter
 
everything RF
Date: 29 April, 2015
 
Sponsored By Mouser
 
 
 
New RF Products this Week
RF Spectrum Analyzer
100 kHz to 27 GHz Real-time Modular Spectrum Analyzers

RF Spectrum Analyzer from Berkeley Nucleonics Corporation

The RTSA7500 Series from Berkeley Nucleonics is a range of modular real-time spectrum analyzers that are designed to analyze wireless signals in the lab, on the manufacturing floor or out in the field. They have a real-time trigger mode for measuring complex data signals such as Wi-Fi and LTE along with markers for tracking specific frequencies.
 
Download Datasheet | Product Details
 
Digital Attenuator
9 kHz to 6 GHz Glitch-Less 7-Bit Digital Step Attenuator

Digital Attenuator from Peregrine Semiconductor

The PE43711 from Peregrine Semiconductor is a glitch-less digital step attenuator that operates from 9 kHZ to 6 GHz. This DSA has been designed for wireless-infrastructure devices, land-mobile-radio (LMR) applications and point-to-point communication systems. The attenuator has an attenuation range from 0 dB to 31.75 dB with a 1 dB step resolution and can handle up to 23 dBm of power.
 
Download Datasheet | Product Details
 
Fixed Attenuator
DC to 26.5 GHz CVD Diamond Chip Attenuators

Fixed Attenuator from EMC Technology & Florida RF Labs

The CA0505D Series from EMC Technology & Florida RF Labs is a range of attenuators that operate from DC to 26.5 GHz and have a CVD diamond substrate. The attenuators are available with attenuation levels up to 30 dB and have a low VSWR of under 1.50:1. They can handle up to 20 W of power, 200 W of peak power and meet NASA out-gassing requirements for space applications.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
DC to 50 GHz MMIC Voltage Controlled Attenuator

RF Variable Attenuator from Microsemi

The MMS004AA from Microsemi is a low-power voltage controlled attenuator that operates from DC to 50 GHz. It has an attenuation range up to 27 dB with an insertion loss less than 5 dB and cam handle a P1dB of 6 dBm. The attenuator is ideal for high frequency and broadband applications in test equipment, commercial and military systems.
 
Download Datasheet | Product Details
 
RF Switch
Lightweight DPDT (Transfer) Switches with SMA connectors

RF Switch from Dow-Key Microwave

The 411HQ Series from Dow-key Microwave is a range of DPDT (transfer) switches that operate from DC to 27 GHz. They have been developed for use in critical programs such as Inmarsat-4 satellite system and intranet content solutions (video, fax, email, LAN access) applications. They can handle up to 2 W of CW power and weigh only 55 g.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
Mouser
Mouser Carries Near Field Communication Solution.
Panasonic NFC Tag LSI delivers stable communication with ultra-low power consumption and greater flexibility for implementing NFC tags into applications. In addition, LSI supports high communication speed and safety during AES encryption, achieving faster and safer NFC communication applications. Click here to learn more
 
 
 
Power Divider
DC to 30 GHz Two Way Thin Film Power Dividers

Power Divider from International Manufacturing Services

The IPT Series of Power Splitters from IMS Resistors are 2-Way Thin Film Power Splitters that operate up to 30 GHz. They have an attenuation of 6 dB with a VSWR of 1.5:1 and are matched to 50 ohms. The dividers are available in tape and reel packaging with wraparound terminals in a number of sizes – 0402, 0603, 0805 and 1206.
 
Download Datasheet | Product Details
 
Front End Module
Switch + LNA Front End Solution for Wi-Fi 802.11b/g/n/a/ac

Front End Module from Qorvo

The RFFM8850P is dual band front end module for Wi-Fi® 802.11b/g/n/a/ac and Bluetooth® systems. It is an integrated Switch + LNA solution which is internally matched to 50 ohms. This FEM integrates a 2.4 GHz SP3T Transmit/Receive Switch, a 5 GHz SP2T Transmit/Receive Switch, a 2.4 GHz Low Noise Amplifier with bypass mode, and a 5 GHz Low Noise Amplifier with bypass mode. It is available in a compact 2.3 mm x 2.3 mm QFN package.
 
Download Datasheet | Product Details
 
RF Amplifier
4 GHz to 8 GHz, GaN Low Noise Amplifier

RF Amplifier from Custom MMIC

The CMD219C4 from Custom MMIC is a broadband MMIC GaN low noise amplifier that operates from 4 GHz to 8 GHz. It provides a gain of 22.5 dB, a noise figure of 1 dB, an IP3 of 28 dBm and P1dB of 17 dBm. It is ideally suited for microwave radios and C-band applications where small size and high input power survivability are needed.
 
Download Datasheet | Product Details
 
RF Amplifier
Wideband Amplifier from DC to 50 GHz

RF Amplifier from MACOM

The MAAM-011109-DIE from MACOM is wideband amplifier that operates from DC to 50 GHz. It is useful in circuits where the incoming signal varies over a broad bandwidth such as in laboratory, instrumentation, and defense applications. The amplifier provides an output power of 20 dBm, a gain of 15 dB, a noise figure of 3.5 dB and a OIP3 of 29 dBm.
 
Download Datasheet | Product Details
 
RF Amplifier
DC to 45 GHz Broadband MMIC Amplifier with PLFX Technology

RF Amplifier from Microsemi

The MMA029AA from Microsemi is an eight stage traveling wave amplifier that operates from DC to 45 GHz. The amplifier has integrated Passive Low Frequency eXtension (PLFX) technology that allows use of less-expensive coil for the amplifier. The amplifier has been designed for general purpose broadband applications and can be used in communications, test equipment and military systems.
 
Download Datasheet | Product Details
 
RF Amplifier
100 Watt Power Amplifier from 3.1 GHz to 3.6 GHz

RF Amplifier from Qorvo

The TGA2813-SM is a high power S-Band amplifier which operates from 3.1 GHz to 3.6 GHz. It provides greater than 100 W of saturated output power, 56% power-added efficiency, and 24 dB power gain. The TGA2813-SM is available in a low-cost, surface mount 42 lead 7x9 mm Overmold QFN with both RF ports matched to 50 ohms. It is ideally suited to support both commercial and defense related radar applications.
 
Download Datasheet | Product Details
 
GPS/GNSS Module
Compact & Powerful GNSS Module

GPS/GNSS Module from Telit Communications

The Telit Jupiter SE868 V3 is a positioning module that combines GPS, GLONASS, Beidou, Galileo, and SBAS to provide a high performance position reporting and navigation solution. It can navigate to -162 dBm and track to -166 dBm, providing improved performance in harsh environments. The module supports ephemeris file injection (A-GPS) and Satellite Based Augmentation System (SBAS) to increase position accuracy.
 
Download Datasheet | Product Details
 
Between Series RF Adapter
DC to 65 GHz NMD Adapter Series

Between Series RF Adapter from Response Microwave Inc

This series of NMD adaptors are available with N18, 3.5mm, 2.92mm, 2.4mm and 1.85mm interface options. The adapters can operate up to 65 GHz with an insertion loss up to 0.20 dB and a VSWR of 1.15:1. The adapters have a stainless steel body with gold plated BeCu center contacts.
 
Product Details
 
RF Cable Assembly
High Performance 50 GHz RF Cable Assemblies

RF Cable Assembly from Maury Microwave

Maury Microwave's Stability™ series are high-performance ruggedized microwave/RF cable assemblies. They have been designed specifically for phase-stable and amplitude-stable applications. The light weight, flexibility and small form factor make theses cable assemblies ideal for use with VNA's, test instruments, bench-top testing and ATE systems. The Stability™ series are now part of the ColorConnect™ family.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.