PREV 8 July, 2015 NEXT

New RF & Microwave Products this Week

July 8, 2015 - everything RF Newsletter
 
everything RF
Date: July 8, 2015
 
Latest RF & Microwave Products
Omni-Directional Antenna
Dual band SMD Antenna for MIMO WiFi Applications

Omni-Directional Antenna from Antenova

The Mutica Dual-band WiFi antenna from Antenova is designed for single and MIMO antenna systems. It has an efficiency of over 75% with an average gain of -0.5 dBi. It requires a small ground plane and integrates into the corner with minimal PCB clearance area.
 
Download Datasheet | Product Details
 
Omni-Directional Antenna
2.4 GHz Permanent-Mount Half-Wave Dipoles

Omni-Directional Antenna from Linx Technologies

The PML Series from Linx Technologies is a range of permanent-mount half-wave dipoles antennas that operate up to 2.4 GHz. They have a bandwidth of 30 MHz, wavelength of 1/2 –wave and have a VSWR of less than 2.0:1. These antennas have a base that tilts 180°, which makes them easy to reorient the antenna for better performance or fold them down for storage and shipment.
 
Download Datasheet | Product Details
 
Front End Module
Front-End Module for GNSS Applications

Front End Module from Skyworks

The SKY65709-81 from Skyworks is a Front-End Module which consists of an integrated Low Noise Amplifier and pre-filter that operates from 1561 MHz to 1606 MHz. It has been designed for the BeiDou Satellite Navigation System/Global Positioning System/Global Navigation Satellite System (BDS/GPS/GNSS) receiver applications.
 
Download Datasheet | Product Details
 
RF Transistor
120 W LDMOS Power Transistor from 1805 MHz to 1995 MHz

RF Transistor from NXP Semiconductors

The BLC9G20LS-120V from NXP Semiconductors is a LDMOS power transistor that operates from 1805 MHz to 1995 MHz. The transistor provides an average power of 30 W and has a gain 19.2 dB with an efficiency of 31 %. It requires a 28 V supply. It has been developed for use in Base Stations.
 
Download Datasheet | Product Details
 
RF Amplifier
2 GHz to 6 GHz GaN Driver Amplifier

RF Amplifier from Qorvo

The TGA2597 from Triquint is a GaN driver amplifier that operates from 2 GHz to 6 GHz. It provides up to 31.5 dBm of output power with a power-added efficiency of 31 % and small signal gain of more than 24 dB. It is matched to 50 Ohms, requires a supply of 25 V and is available in a die that measures 2.14 x 1.5 x 0.1 mm.
 
Download Datasheet | Product Details
 
RF Amplifier
5 GHz Power Amplifier for 802.11a/n/ac WLAN Applications

RF Amplifier from Anadigics

The AWL5905 from Anadigics is a 5 GHz Power amplifier for WLAN that supports IEEE 802.11a/n/ac applications. The amplifier provides a linear power gain of 30 dB and P1dB of 27 dBm with an integrated high directivity coupler/detector. It reduces system power consumption with an extremely low leakage current while the amplifier is shut down.
 
Download Datasheet | Product Details
 
Down Converter
4-Channel, 24 GHz Receiver Downconvertor

Down Converter from Analog Devices

The ADF5904 from Analog Devices is a 4-channel, 24 GHz receiver downconvertor. Each channel contains a single-ended RF input with an on-chip balun followed by a differential low noise amplifier (LNA) and a downconverter mixer with differential output buffers. The RF LO path also has an on-chip balun.
 
Download Datasheet | Product Details
 
Phase Locked Loop
50 MHz to 3760 MHz Frequency Synthesizer

Phase Locked Loop from Texas Instruments Inc.

The LMX2581 from Texas Instruments is a low noise wideband frequency synthesiser that can generate signals from 50 MHz to 3760 MHz. It integrates a delta-sigma fractional N PLL, multiple core VCO, programmable output driver and two differential output buffers.
 
Download Datasheet | Product Details
 
RF Switch
0.1 GHz to 6 GHz SP3T Switch with Fast Switching Time

RF Switch from Skyworks

The SKY13588-460LF from Skyworks is a SP3T switch that operates from 0.1 GHz to 6 GHz. It has a low insertion loss of 0.45 dB and a high isolation of 30 dB. The switch can handle up to 39 dBm of power and has third order input intercept point (IIP3) up to +70 dBm with a rise/fall time of 250 ns & on/off time of 1500 ns.
 
Download Datasheet | Product Details
 
Duplexer
WR42 Waveguide Duplexer from 17.7 GHz to 19.7 GHz

Duplexer from DFINE Technology

The JDWDF1819H165 from Jezetek is a WR42 waveguide duplexer that operates in L channel from 17.700 GHz to 18.140 GHz and H channel from 19.260 GHz to 19.700 GHz. It has a pass band insertion loss of 0.6 dB, an isolation of 65 dB and a pass band return loss of 18 dB.
 
Download Datasheet | Product Details
 
Power Divider
2 Way Multi Band Power Divider from 500 MHz to 6 GHz

Power Divider from MECA

The 802-2-3.250WWP is a 2 Way multi band, multi market power divider from MECA. This Wilkinson Power Divider operates from 500 MHz to 6 GHz and can handle up to 30 watts of power. It is available with SMA connectors in a module that is IP67 rated and suited for indoor and outdoor applications. The power divider has a wide frequency range covering UHF through ISM bands.
 
Download Datasheet | Product Details
 
Power Divider
2 Way Wilkinson Power Divider from 4 GHz to 65 GHz

Power Divider from Marki Microwave

The PD-0465 is a 2 Way Wilkinson power divider/combiner that operates from 4 GHz to 65 GHz. It has an insertion loss under 4 dB, isolation over 18 dB and a VSWR of 1.4:1. The PD-0450 has an outstanding phase balance of ±15 degree and amplitude balance of ±1.5 dB. It is available as a module with 1.85 mm connectors.
 
Download Datasheet | Product Details
 
Directional Coupler
Low Loss Couplers for Load Pull and High Power Applications

Directional Coupler from Maury Microwave

The Low Loss Couplers from Maury Microwave are a range of bi-directional couplers that operate from 0.6 GHz to 34 GHz. They have coupling values up to 30 dB with a low insertion loss and high directivity. The couplers can handle up to 500 W of CW power and 2 kW of peak power. They are available with coupling ports – 3.5 mm Female and 2.92 mm Male.
 
Download Datasheet | Product Details
 
RF Test Box
Radio Communication Analyzer from 30 MHz to 2.7 GHz

RF Test Box from Anritsu

The MT8820C from Anritsu is a radio communication analyzer that operates from 30 MHz to 2.7 GHz. It is built for testing LTE-Advanced DL CA, LTE, 2G and 3G terminals. It supports high-speed batch measurements of RF TRx characteristics and call connection tests for 2G/3G/4G mobile terminals.
 
Download Datasheet | Product Details
 
RF Connector
7-16 DIN Compression Connector

RF Connector from RF Industries

The COMP-DM-440 from RF Industries is a compression connector that operates up to 3 GHz. It is matched to 50 Ohms and has a return loss up to -32 dB. The connector is designed for RG8, UF and 400 sized cables. It has a 7-16 DIN to male interface.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.