1. everything RF
  2. RF Newsletters
more
PREV 29 July, 2015 NEXT

New RF & Microwave Products this Week

July 29, 2015 - everything RF Newsletter
 
everything RF
Date: July 29, 2015
 
Sponsored by Exodus
 
 
 
New RF & Microwave Products
RF Power Meter
High Speed USB Power Meter from 10 MHz to 6 GHz for MIMO Measurements

RF Power Meter from DARE!! Instruments

The RPR3006W from Dare Instruments is a high speed USB power meter that can make accurate power measurements for RF and EMC applications. It operates from 10 MHz to 6 GHz and has a measuring range from -50 dBm to +10 dBm with an accuracy of ± 0.2 dB and measuring speed up to 5 MS/s.
 
Download Datasheet | Product Details
 
PXI Signal Analyzer
9 kHz to 27 GHz PXIe Vector Signal Analyzer

PXI Signal Analyzer from Keysight Technologies

The M9393A is a PXI vector signal analyzer from Keysight Technologies that operates from 9 kHz to 8.4 GHz, 14 GHz, 18 GHz or 27 GHz. This signal analyzer has an analysis bandwidth of 40 MHz, 100 MHz or 160 MHz.
 
Download Datasheet | Product Details
 
RF Amplifier
10 KW Liquid-Cooled Power Amplifier from 9 kHz to 225 MHz

RF Amplifier from Rohde & Schwarz

The R&S BBL200 is a liquid-cooled broadband amplifier that is ideal for high power applications. This amplifier is available in two configurations – One that generates 3KW of power and the other that generates 10 KW of power from 9kHz to 225 MHz. They are liquid-cooled, solidstate, highly rugged, quiet and efficient.
 
Download Datasheet | Product Details
 
Laminate
High Frequency Antenna Grade Laminate Compatible with FR-4

Laminate from Rogers Corporation

The RO4500 Series are High Frequency Laminates fully compatible with conventional FR-4 and high temperature lead free solder processing. These laminates have a dielectric constant (Dk) ranging from 3.3 to 3.5 (±0.08) and a loss tangent (Df) of 0.0020 to 0.0037 measured at 2.5 GHz. This laminate series is ideal for printed circuit antenna applications and WiMAX antenna networks.
 
Download Datasheet | Product Details
 
GPS/GNSS Module
Compact GNSS Module with Embedded Antenna

GPS/GNSS Module from u-blox AG

The CAM-M8C from u-blox is a GNSS module which allows concurrent reception of GPS/QZSS, GLONASS, BeiDou signals. This module has an embedded omnidirectional chip antenna which spans the L1 band. It has a sensitivity of -167 dBm and is available in a compact light weight package which measures 9.6 x 14.0 x 1.95 mm.
 
Download Datasheet | Product Details
 
Sponsored by Exodus
Exodus
Best in Class RF Solid State Amplifier Modules, Systems & Related Communication Equipment
Exodus Advanced Communications is a designer and manufacturer of RF SSPA’s featuring the latest in LDMOS, GaN and GaAsFET discrete devices and hybrid Chip & Wire on ceramic substrate technologies w/ frequency ranges from 10KHz to 40GHz and power levels exceeding 1KW for modules and 10KW for systems.Click here to learn more.
 
 
 
Power Divider
2 Way Power Divider from 2 GHz to 18 GHz

Power Divider from VidaRF

The VPD-20180A2 from Vida RF is a 2 Way power divider that operates from 2 GHz to 18 GHz. The divider can handle up to 10 Watts of power, has an insertion loss less than 1.2 dB, an isolation of over 18 dB and a VSWR under 1.50:1. It is available in a module with SMA Female connectors that meets IP-65 Standards.
 
Download Datasheet | Product Details
 
Power Divider
6 Way Power Divider from 0.5 to 6 GHz

Power Divider from Werbel Microwave

The WMPD06-0.5-6-S is a 6 Way power divider that operates from 500 MHz to 6 GHz. It can handle up to 50 watts of power, has an insertion loss of 2.2 dB and isolation of 20 dB. This power divider has an input and output return loss of 11 dB and 15 dB. It is available as a module with SMA or N Type connectors and measures 9.0 x 6.0 x 0.9 inches.
 
Download Datasheet | Product Details
 
Directional Coupler
10 dB SMA Directional Coupler from 2 GHz to 20 GHz

Directional Coupler from HASCO Components

The HC0220-10 from HASCO is a directional coupler that operates from 2 GHz to 20 GHz. It has 10 dB coupling with an insertion loss of less than 1 dB and directivity of 15 dB. The coupler can handle up to 50 W of CW power and 3 KW of peak power. It is available in a module with SMA Female connectors that are matched to 50 Ohms.
 
Download Datasheet | Product Details
 
RF Amplifier
1 Watt Linear Amplifier from 1. 8 GHz to 2.7 GHz

RF Amplifier from Qorvo

The TQP9113 from Qorvo is a 2-stage linear amplifier that operates from 1. 8 GHz to 2.7 GHz. It provides a gain of 27.6 dB, has an IP3 of 41 dBm and P1dB of 30.6 dBm. The amplifier requires a supply of 5 V and draws 215 mA of current. The TQP9113 has an adjustable bias allowing the amplifier’s power consumption to be reduced for occasions when linear performance is not required.
 
Download Datasheet | Product Details
 
RF Amplifier
0.05 GHz to 6 GHz Wideband Amplifier Die

RF Amplifier from Mini Circuits

The PHA-1-D+ from Mini Circuits is a wideband amplifier that operates from 0.05 GHz to 6 GHz. It has a high IP3 of 38.8 dBm, P1dB of 22 dBm, a gain of 13.6 dB and a noise figure of 2.1 dB. The amplifier requires a 5 V supply for operation, is matched to 50 Ohms and is available as a die. It is ideal for portable wireless, base station infrastructure and cellular applications.
 
Download Datasheet | Product Details
 
Front End Module
450 MHz Transmit/Receive Front-End Module for Smart Energy

Front End Module from Skyworks

The SKY65377-11 is a 450 MHz ISM Band Transmit/Receive Front-End Module for smart energy applications. The module consists of complete transmit and receive components with the associated switching and filtering. It features a 30 dBm output power, low leakage current shutdown and 40% PAE.
 
Download Datasheet | Product Details
 
Signal Generator
USB Controlled RF Signal Source from 1 Hz to 100 MHz

Signal Generator from Telemakus

The TDDS100-48 from Telemakus is a USB-stick-sized direct digital synthesized RF signal source that operates from 1 Hz to 100 MHz. It has a 0 dBm output and can be swept in steps as low as 1 Hz between any two frequencies in its specified range.
 
Download Datasheet | Product Details
 
Vector Network Analyzer
High Performance Computer Controlled VNA from 100 kHz to 20 GHz

Vector Network Analyzer from Copper Mountain Technologies

The Cobalt C1220 is a modular computer controlled Vector Network Analyzer that operates from 100 kHz to 20 GHz. It is ideal for measuring S-parameters and has a dynamic range of 145 dB. Cobalt VNAs feature hybrid dual-core DSP+FPGA signal processing engines, and new frequency synthesizer technologies.
 
Download Datasheet | Product Details
 
In Series RF Adapter
Low PIM 7/16 Jack to 7/16 Jack Straight Bulkhead Adapter

In Series RF Adapter from Amphenol RF

The 272301 from Amphenol RF is a Low PIM straight bulkhead adapter that operates from DC to 6 GHz. It has an insertion loss of 0.1 dB, a low PIM less than -160 dBc and a VSWR under 1.10:1. The adapter is matched to 50 Ohms and has an insulation resistance up to 10000 Mohms. It has a brass body with a white bronze finish.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.