1. everything RF
  2. RF Newsletters
more
PREV 19 August, 2015 NEXT

New RF & Microwave Products this Week

Aug 19, 2015 - everything RF Newsletter
 
everything RF
Date: Aug 19, 2015
 
Sponsored by Inmet (API Technologies)
 
 
 
New RF & Microwave Products
RF Test Set
Cost Effective GNSS Production Tester

RF Test Set from Rohde & Schwarz

The R&S SMBV-P101 is a GNSS production tester designed for GNSS chipset testing and speed-optimized production testing of GNSS receivers. It supports GPS, Glonass, BeiDou and Galileo. The device provides flexibly customizable navigation data and movement profiles for verifying the maximum movement dynamics of a GNSS receiver.
 
Download Datasheet | Product Details
 
RF Module
RF Module Enables Smaller Implantable Medical Devices

RF Module from Microsemi

The ZL70103 is a small radio module that has been developed for implantable medical devices such as pacemakers, cardiac defibrillators and neurostimulators—measuring just 5.5mm x 4.5mm x 1.5mm. It enables patient health and device performance data to be quickly transmitted with little impact to the battery life of the implanted device.
 
Download Datasheet | Product Details
 
RF Switch
USB/Ethernet Controlled Miniature Switch Modules

RF Switch from Teledyne Cougar

The Series MMA switch modules from Teledyne offer up to a 4 SPDT switches integrated in to one system. The system can be remote controlled via USB and/or TCP/IP (Ethernet). It is available in three frequency configurations DC to 18 GHz, DC to 26.5 GHz and DC to 40 GHz.
 
Product Details
 
RF Connector
1.0 mm (W) Connectors Operate up to 110 GHz

RF Connector from Southwest Microwave

The 1.0 mm (W) connectors from Southwest Microwave are rugged connectors that operate up to 110 GHz. They are available as field-replaceable two and four-hole flange mount and thread-in connectors, direct solder cable connectors, and clamp-on removable, reusable end launch connectors, including low profile and reduced-size low-profile versions.
 
Download Datasheet | Product Details
 
In Series RF Adapter
Low PIM Adapters from DC to 6 GHz

In Series RF Adapter from VidaRF

The ADP-3000 Series from Vida RF is a range of low PIM adapters that operate from DC to 6 GHz. They have a VSWR of 1.20:1 and a low PIM up to 165 dBc. These adapters are available in various connector configurations that include – SMA, N Type, SMB, 7/16, TNC Male and Female options. They have a silver/Tri metal on brass body with a silver-plated on Be-CU contact pin and are RoHS complaint.
 
Download Datasheet | Product Details
 
RF Amplifier
4 Channel LNA with Programmable Gain Amplifier

RF Amplifier from Analog Devices

The ADA8282 from Analog Devices is a 4-channel low noise amplifier along with a programmable gain amplifier that has been designed for low-cost, low power and compact size applications. It has a gain of 18 dB to 36 dB in 6 dB steps with a bandwidth of 5 MHz and slew rate of 28 V/µs in each channel.
 
Download Datasheet | Product Details
 
Sponsored by Inmet (API Technologies)
Aeroflex / Inmet
Meet the New Magic Number for 2 Watt Temperature Variable Attenuators
Push the limits of frequency without sacrificing performance. Aeroflex/Inmet’s new DC to 12 GHz Powerfilm surface mount attenuators vary with temperature and are the perfect balance of price, power, and dependability.To learn more, download the data sheet.
 
 
 
Limiter
High Power Limiter from 18 GHz to 40 GHz

Limiter from Planar Monolithics Industries

The LM-18G40G-SMT-1 from PMI is a high power limiter that operates from 18 GHz to 40 GHz. It can withstand an input power level of 20 Watts. The limiter has a response time of 250 nsec and a VSWR of 2.0:1 with a duty cycle of 40 %. It is available with a surface mount/drop-in carrier that measures 0.198 x 0.270 x 0.016 inch.
 
Download Datasheet | Product Details
 
RF Mixer
Double Balanced Mixer from 3.7 GHz to 22 GHz

RF Mixer from Marki Microwave

The MM1-0422H from Marki Microwave is a GaAs Schottky diode double balanced MMIC mixer with an RF frequency from 3.7 GHz to 22 GHz. The mixer has excellent LO-RF isolation of nearly 50 dB typical, and excellent spurious suppression. It is available as a wire bondable chip that measures 0.055 x 0.043 x 0.004 inches or an SMA connectorized package.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
50 MHz to 6 GHz Silicon Based Voltage Variable RF Attenuator

RF Variable Attenuator from Integrated Device Technology

The F2258 from IDT is a silicon based voltage variable attenuator that operates from 50 MHz to 6 GHz. It has about half the insertion loss of competitive solutions, IP3 performance 1000x (30 dB) better than the competing Gallium arsenide (GaAs) device, and they exhibit a linear-in-dB attenuation characteristic across the voltage control range.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
5-Bit, 6-Bit & 7-Bit Compact Digital Attenuators up to 40 GHz

RF Variable Attenuator from AtlanTecRF

The Digital Control PIN Attenuators from AltanTecRF are available in multiple frequency configurations up to 40 GHz. These attenuators have an attenuation range from 30 to 60 dB with a step size of under 1 dB depending on the selected configuration. They can handle up to 200 mW of power, have a low VSWR and a fast response time.
 
Download Datasheet | Product Details
 
RF Mixer
Wideband Mixer from 2 GHz to 14 GHz with Integrated LO Frequency Doubler

RF Mixer from Linear Technology

The LTC5549 from Linear Technologies is a double-balanced mixer that can operate either as an upconverter or downconverter, with a wide RF frequency range from 2 GHz to 14 GHz. It offers exceptionally high linearity of 24.4 dBm IIP3 at 9 GHz. The LTC5549 can be used in microwave transreceivers, wireless backhaul, phased-array antennas, test equipment and satellite MODEMs applications.
 
Download Datasheet | Product Details
 
Power Divider
8 Way Multi Band/Multi Market Power Divider from 500 MHz to 6 GHz

Power Divider from MECA

The 808-2-3.250WWP is a 8 Way multi band, multi market power divider from MECA. This Wilkinson Power Divider operates from 500 MHz to 6 GHz and can handle up to 30 watts of power. It has an insertion loss less than 3 dB, an amplitude balance of 0.8 dB and an isolation of over 17 dB.
 
Download Datasheet | Product Details
 
RF Amplifier
Hybrid Power Doubler Amplifier from 45 MHz to 1218 MHz

RF Amplifier from Qorvo

The RFPD3210 from RFMD is a hybrid power doubler amplifier module that operates from 45 MHz to 1218 MHz. It provides a gain of 22.8 dB, a noise figure of 3 dB, CSO of -76 dBc and CTB of -73 dBc. The module provides excellent linearity and superior return loss performance. It requires a supply of 24 V while drawing 470 mA of current. It is available in a SOT115J package.
 
Download Datasheet | Product Details
 
RF Amplifier
Wideband Power Amplifier from 800 MHz to 2500 MHz

RF Amplifier from Triad RF Systems

The TA1148 from Triad RF Systems is a GaAs power amplifier that operates from 800 MHz to 2500 MHz. It has been designed to support any signal type and modulation format, including but not limited to 3-4G telecom, WLAN, OFDM, DVB, and CW/AM/FM. It has been designed to make it immune from damage due to any out of spec DC voltage conditions that may be applied.
 
Download Datasheet | Product Details
 
RF Amplifier
Broadband Gain Block from 500 MHz to 11 GHz

RF Amplifier from Guerrilla RF

The GRF2001 from Guerrilla RF is a broadband, low noise linear gain block that operates from 500 MHz to 11 GHz. It has been designed to have excellent linearity making the amplifier ideal for small cell, wireless infrastructure and other high performance applications.
 
Download Datasheet | Product Details
 
RF Amplifier
High-Power 802.11ac WLAN Power Amplifier with Integrated Power Detector

RF Amplifier from Skyworks

The SKY85405 from Skyworks is a MMIC Power amplifier that operates in the 5 GHz 802.11 ac band. It provides high linear output power for IEEE 802.1, MCS9 and has a high transmit gain with superior efficiency. The device consists of an internal band-gap regulator that eliminates the need for an external reference supply.
 
Download Datasheet | Product Details
 
Front End Module
4.9 GHz to 5.9 GHz SPDT Switch with Low-Noise Amplifier

Front End Module from Skyworks

The SKY85605-11 from Skyworks is an integrated, SPDT switch with a low-noise amplifier designed for wireless applications. It operates from 4.9 GHz to 5.9 GHz and has a low noise figure with an ability to add custom filtering between the switch and LNA blocks. It requires a supply of 3.3 V while drawing low current.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.