1. everything RF
  2. RF Newsletters
more
PREV 26 August, 2015 NEXT

New RF & Microwave Components this Week

Aug 26, 2015 - everything RF Newsletter
 
everything RF
Date: Aug 26, 2015
 
Sponsored by Mouser
 
 
 
New RF & Microwave Products this Week
RF Test Set
LTE-Advanced Base Station Simulator/Signal Tester

RF Test Set from Anritsu

The MD8430A is a signalling tester for LTE-Advanced chipsets. In has been designed for early chipset and UE development, function tests, and performance tests ranging from carrier acceptance to protocol conformance tests. It also supports fault operation tests, which are difficult to perform at connection with live base stations.
 
Download Datasheet | Product Details
 
RF Module
Low Power Plug & Play Bluetooth Smart Module

RF Module from Bluegiga

The Blue Gecko BGM111 Bluetooth Smart module is a complete plug and play solution which includes the Bluetooth Smart software stack and antenna. It has an output power of up to 8 dBm with a range of up to 200 meters. It has low power consumption with RX peak current of 7.5 mA and Tx peak current of 8.2 mA at 0 dBm.
 
Download Datasheet | Product Details
 
RF Switch
DC to 26.5 GHz, SP6T Switch for Military, Commercial Applications

RF Switch from Dow-Key Microwave

The Reliant Switch from Dowkey is a SP6T bidirectional coaxial switch designed for automated testing and operates from DC to 26.5 GHz. It has an insertion loss of 0.3 dB, an isolation of 100 dB and a third order intermodulation of -120 dBc.
 
Download Datasheet | Product Details
 
Laminate
Halogen-free, Low-Dk, Low Loss Material for Mobile Applications

Laminate from Isola Group

The IS350MD is a proprietary high performance, mid-Dk, low-loss, halogen-free material specifically designed for the high-end mobile applications. It has a base material of type FR-4. The resin matrix is based on a modified epoxy resin conventional E-glass-fabric is used for reinforcement.
 
Download Datasheet | Product Details
 
Voltage Controlled Oscillator
Monolithic VCO from 8.71 GHz to 9.55 GHz

Voltage Controlled Oscillator from Analog Devices

The HMC1161 MMIC VCO that integrates a resonator, negative resistance device, and a varactor diode. It operates at a frequency range from 8.71 GHz to 9.55 GHz and also features a half frequency output from 4.355 GHz to 4.775 GHz. It has an output power of 11 dB from a typical 5 V supply.
 
Download Datasheet | Product Details
 
RF Amplifier
Ku-Band Driver Amplifier from 11 GHz to 17 GHz

RF Amplifier from Qorvo

The TGA2243-SM is a 3-Stage driver amplifier that operates from 11 GHz to 17 GHz. This Ku-Band Amplifier provides 25 dB of gain and 19 dBm of Power (P1dB). It requires a bias from 6 to 9 V and draws 85 mA of current. It is available in a 12 lead 4 mm x 4mm QFN package. The TGA2243-SM is ideal for Point-to-point radios, Military & Space Ku-Band applications and VSAT.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
Mouser - Bluegiga
Mouser Carries Robust, Long-Range Connectivity Solution for Bluetooth® Applications.
Bluegiga, a Silicon Labs Company, BT121 Bluetooth Smart Ready Module adds connectivity to both Bluetooth BR/EDR and Smart devices. With the BT121, no Bluetooth development is needed. It integrates a high-performance Bluetooth radio, a low-power ARM® Cortex®-M0 MCU and a Bluegiga Bluetooth Smart Ready stack software.Learn More
 
 
 
90 Degree Hybrid Coupler
Surface Mount 90 Degree Hybrid Coupler from 2 GHz to 6 GHz

90 Degree Hybrid Coupler from Werlatone Inc

The QH10148 is a 90 Degree Hybrid Coupler that operates from 2 GHz to 6 GHz. It can handle up to 100 Watts of CW power, has an insertion loss of 0.3 dB, isolation of over 20 dB and a VSWR of 1.3:1. This surface mount coupler has a phase balance of ± 7° and amplitude balance of ± 0.5 dB.
 
Download Datasheet | Product Details
 
RF Amplifier
ESD Rated Low Noise Amplifier Die from 0.05 GHz to 4 GHz

RF Amplifier from Mini Circuits

The PSA4-5043-D+ is a monolithic amplifier Die that operates from 0.05 GHz to 4 GHz. This Low noise, high IP3 amplifier is ideal for high dynamic range receiver applications. It has a a gain of 18.4 dB, Noise figure of 0.8 dB and a P1dB of 20 dBm. It requires a 3 to 5 V supply voltage and draws under 56 mA of current.
 
Download Datasheet | Product Details
 
RF Cable Assembly
DC to 18 GHz Robust, Lightweight Cable Assemblies

RF Cable Assembly from Huber+Suhner

The EACON field mountable microwave cable assemblies are lightweight and robust solutions that can be quickly and easily assembled. The assemblies operate up to 18 GHz and are ideal for the aviation and defence markets.
 
Download Datasheet | Product Details
 
Between Series RF Adapter
2.4mm Female to 3.5mm Male Adapter up to 34 GHz

Between Series RF Adapter from HASCO Components

The 24J-35P is a 2.4mm Female to 3.5mm Male adapter from HASCO. This adapter can operate up to 34 GHz in frequency and is matched to 50 Ohms. It has a VSWR of under 1.25:1 and has a durability of 500 cycles. The adapter has a passivated stainless steel housing with a gold plated Beryllium Copper center contact and a PTFE dielectric.
 
Download Datasheet | Product Details
 
Directional Antennas
Active LogPer Antenna from 380 MHz to 10 GHz

Directional Antennas from Aaronia AG

The HyperLOG 30100X from Aaronia AG is a directional antenna that operates from 380 MHz to 10 GHz. These ultra-thin directional antennas have a gain of 45 dBi and a VSWR of 1.25:1. The antenna includes a high-end preamplifier with a pre-amp noise up to 4.5 dB and preamp gain up to 40 dB.
 
Download Datasheet | Product Details
 
RF Switch
Reflective SPDT Switch for Ku-Band Applications

RF Switch from Qorvo

The TGS4310-SM is a SPDT switch that operates from 13 GHz to 19 GHz. This reflective switch has an insertion loss of less than 1.7 dB with an isolation greater than 20 dB. It can handle up to 2 watts of power and has an IIP3 of 55 dBm.
 
Download Datasheet | Product Details
 
Front End Module
Compact 802.11 b/g/n/ac Front End Module

Front End Module from Anadigics

The AND0281 is a 2.4 GHz Front End Module with an integrated power amplifier, low noise amplifier, and SP3T Tx/Rx/BT switch. This compact 802.11 b/g/n/ac Front End Module provides a 1.8% EVM with an output power of 18 dBM and gain of 28 dB. In the Rx path it has a gain of 14.5 dB with a noise figure of 2.2 dB.
 
Download Datasheet | Product Details
 
RF Transistor
125 W CW RF Power GaN Transistor from 1 to 2700 MHz

RF Transistor from Freescale

The MMRF5015N is a GaN transistor that operates up to 2700 MHz with an output power of 125 W. This wideband rugged transistor includes input matching for extended bandwidth performance. It has a high gain and is ideally suited for CW, pulse and wideband RF applications.
 
Download Datasheet | Product Details
 
Coaxial Circulator
High Power VHF Coaxial Circulator

Coaxial Circulator from Renaissance Electronics Corporation

The 3A2BY is a coaxial circulator that operates from 300 MHz to 360 MHz. It has an insertion loss of 0.5 dB, isolation of 18 dB and VSWR of 1.3:1. The circulator can handle up to 200 watts of CW power. It is available in a compact module which measures 2.9 x 2.8 x 1.14 inches with multiple connector options.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.