1. everything RF
  2. RF Newsletters
more
PREV 16 september, 2015 NEXT

New RF & MW Products this Week

Sept 16, 2015 - everything RF Newsletter
 
everything RF
Date: Sept 16, 2015
 
Sponsored by Inmet (API Technologies)
 
 
 
New RF & Microwave Products this Week
RF Spectrum Analyzer
5 MHz to 7.0 GHz Phase Noise Analyzer

RF Spectrum Analyzer from Berkeley Nucleonics Corporation

Berkeley Nucleonics' Model 7070 is a signal source analyzer that operates from 5 MHz to 7 GHz. It makes reliable phase noise measurements down to -185 dBc/Hz from 0.1 Hz up to 50 MHz frequency offset. The analyzer operates with either internal or external reference sources and has a powerful graphical user interface (GUI). It can controlled remotely via LAN, USBTMC, and GPIB.
 
Download Datasheet | Product Details
 
Transceiver
Single Chip SiGe Transceiver for Small Cell Backhaul Applications

Transceiver from Infineon Technologies

The BGT70 is a single chip SiGe Transceiver Chipset from Infineon that operates from 57 to 64 GHz. This transceiver has been developed for small cell backhaul applications. The chip consists of a power amplifier, Low Noise Amplifier, Up- and Down-Convertor, Programmable Gain Amplifier (PGA), Voltage Controlled Oscillator (VCO) components all on one SiGe chip in a 6 x 6 mm package.
 
Download Datasheet | Product Details
 
Power Divider
30 W Power Dividers from 500 MHz to 6 GHz

Power Divider from MECA

The 80X-4-3.250WWP broadband line of power dividers from MECA operate from 500 MHz to 6 GHz. They are available in 2, 4, 8 & 16-Way configurations and suited for indoor and outdoor applications. These power dividers can handle up to 30 W of power with an isolation from 17 to 20 dB, an insertion loss under 2.1 dB and a VSWR under 1.30:1.
 
Product Details
 
Power Divider
2 Way Wilkinson Power Divider from 4 GHz to 65 GHz

Power Divider from Marki Microwave

The PD-0465 is a 2 Way Wilkinson power divider/combiner that operates from 4 GHz to 65 GHz. It has an insertion loss under 4 dB, isolation over 18 dB and a VSWR of 1.4:1. The PD-0450 has an outstanding phase balance of ±15 degree and amplitude balance of ±1.5 dB. It is available as a module with 1.85 mm connectors.
 
Download Datasheet | Product Details
 
RF Amplifier
RF Pre-Amplifiers for MRI Coils

RF Amplifier from MicroWave Technology

The MSM Series from MicroWave Technology is a range of pre-amplifiers that operate at 1.5T (64 MHz), 3T (123-128 MHz), and 7T (298 MHz) frequencies. This amplifier series has been developed for MRI coils with a large number of channels. They have a low noise figure of 0.45 dB, a gain of 28 dB and an IP3 of 20 dBm.
 
Download Datasheet | Product Details
 
Sponsored by Inmet (API Technologies)
Inmet - API Technologies
Meet the New Magic Number for 2 Watt Temperature Variable Attenuators
Push the limits of frequency without sacrificing performance. Aeroflex/Inmet’s new DC to 12 GHz Powerfilm surface mount attenuators vary with temperature and are the perfect balance of price, power, and dependability.To learn more, download the data sheet.
 
 
 
RF Amplifier
25 W Bi-Directional Amplifier from 400 to 450 MHz

RF Amplifier from Triad RF Systems

The TTRM1076 from Triad RF System is a bi-directional amplifier that can be used for both military and commercial applications. It operates from 400 to 450 GHz and supports most signal types and modulation formats including. The amplifier has high speed T/R switching and sequencing of the PA, LNA, and switch driver circuitry.
 
Download Datasheet | Product Details
 
RF Amplifier
K-band Driver Amplifier from 20 GHz to 26 GHz

RF Amplifier from Z-COMM

The DRC23000M from Z-COMM is a driver amplifier module that operates from 20 GHz to 26 GHz. It provides more than 16 dBm of output power, 20 dB of gain and an OIP3 of 26 dBm at 10 dBm per tone. The amplifier has an integrated single power supply of +5 V.
 
Download Datasheet | Product Details
 
RF Amplifier
K-band Power Amplifier from 17.7 GHz to 19.7 GHz

RF Amplifier from Z-COMM

The PAC18700T from Z-COMM is a power amplifier module that operates from 17.7 GHz to 19.7 GHz. It provides more than 30 dBm of output power, a gain of 26 dB and high IP3 point of 46 dBm. The amplifier has an integrated single power supply of +5 V and has a wide dynamic range power detector.
 
Download Datasheet | Product Details
 
RF Amplifier
Broadband Gain Block from 200 MHz to 5 GHz for Small Cells

RF Amplifier from Guerrilla RF

The GRF2001 from Guerrilla RF is a broadband, low noise linear gain block that operates from 200 MHz to 5 GHz. It has been designed to have excellent linearity making the amplifier ideal for small cell, wireless infrastructure and other high performance applications.
 
Download Datasheet | Product Details
 
Switch Matrix
16 x 16 Switch Matrix/Router from 50 MHz to 2500 MHz

Switch Matrix from ETL Systems

The VTR-70 Series is a 16 x 16 Switch Matrix/Router that operates from 50 MHz to 2500 MHz. This matrix has been designed to operate in the L-band and is ideal for TVRo, satellite ground stations and RF distribution applications. It is available in a 1U high chassis with control option on the front panel.
 
Download Datasheet | Product Details
 
GPS/GNSS Module
Compact GPS/GNSS Receiver Module with Additional LNA

GPS/GNSS Module from Antenova

The M10578 is a compact GPS/GNSS solution with an integrated antenna. Its design is constructed on a high grade FR4 substrate, using a high density layout multi-layer design, and combines this with the considerations to the RF function that are critical for location performance.
 
Download Datasheet | Product Details
 
Omni-Directional Antenna
Penta-Band M2M and IoT Antenna

Omni-Directional Antenna from Parsec Technologies, Inc.

The PTA020 from Parsec Technologies is an omni-directional, active antenna for M2M, IoT, OBD and Telematics applications that covers GPS and GLONASS frequency bands. It covers five frequency bands from 699 MHz to 2155 MHz with an average gain of 1 dBi and TOI of +19 dBm. It provides high efficiency coverage in a compact form factor with an exceptionally small ground plane.
 
Download Datasheet | Product Details
 
Laminate
Low Loss Laminate Series with Dielectric Constant of 6.5 up to 40 GHz

Laminate from Rogers Corporation

The RO3006 is a ceramic-filled PTFE composite intended for use in commercial microwave and RF applications. The laminate offer excellent stability over a wide temperature including the elimination of the step change in its dielectric constant.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
44 GHz Microwave Handheld Spectrum Analyzer

RF Spectrum Analyzer from Keysight Technologies

The N9961A (FieldFox Series) is a Handheld microwave spectrum analyzer operates from 9 kHz to 44 GHz and can be remote controlled via an iPad or iPhone. Its dust-free design with no fans and no vents makes it reliable in harsh environments. This spectrum can be used to test and analyze satellite communications, microwave backhaul, military communications, radar systems, active and passive devices.
 
Download Datasheet | Product Details
 
PXI RF Signal Transceiver
6 GHz RF Vector Signal Transceivers

PXI RF Signal Transceiver from National Instruments

The PXIe-5644R/5645R/5646R from National Instruments is a vector signal transceivers (VST) built on FPGA technology programmable with NI LabVIEW software. The VST includes a vector signal generator, vector signal analyzer, and digital I/O in a single PXI module and operates from 65 MHz to 6 GHz.
 
Download Datasheet | Product Details
 
Vector Network Analyzer
High performance vector network analyzer with upto 4 ports

Vector Network Analyzer from Rohde & Schwarz

The R&S ZVA are 4 port Vector Network Analyzers that operate up to 110 GHz. This VNA series have an IF bandwidth of 1/5/30 MHz with a high output power of greater than 15 dBm, wide dynamic range of 140 dB and can make fast measurements at a speed of 3.5us per test point.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.