1. everything RF
  2. RF Newsletters
more
PREV 28 september, 2015 NEXT

Latest News, White Papers & Upcoming Events

Sept 28, 2015 - everything RF Newsletter
 
everything RF
Date: Sept 28, 2015
 
Find & Comapare RF Terminations on everything RF
 
 
 
Top News Stories of the Week
New Way to Up-convert Signal Frequency using Josephson Junction - SPIN-CNR & NEST-CNR
Rohde & Schwarz Demonstrate eCall Solution for the Automotive Industry - Rohde & Schwarz
Cobham Defines the Future of Wireless Radio for Surveillance Applications - Cobham
SkyCross Antenna Technology Enables 4x4 MIMO for LTE and Wi-Fi - SkyCross
Test Solution Makes RRH Field Testing Easier, Faster and Cost-Efficient - Anritsu
BTC Broadcast Test Set Certified for DTG D-Book and NorDig Standards - Rohde & Schwarz
2-Gigabit E-Band Radios to Accelerate Capacity-Hungry Networks - Siklu
Conformance Test System Receives Worlds First LTE 3CA Certification - Anritsu
Wireless Connectivity Chips for Seamless In-Vehicle Connectivity - Broadcom Corporation
Software Addresses Emerging Wireless Power Transfer Applications - Keysight Technologies
Optenni Matching Network Design Workflow Now Integrates with Remcom EM Software - Remcom
More News
New White Papers
802.11ac MU-MIMO: Bridging the MIMO Gap in Wi-Fi - Qualcomm Atheros, Inc.
Minimizing PiM Generation from RF Cables and Connectors - Santron
GaN Thermal Analysis for High-Performance Systems - Qorvo
Entering the Era of Small Cells - Sivers IMA
A 4-Channel 28 GHz Power Amplifier with 4-Bit Digital Phase Control for 5G RF Front Ends - Plextek RF Integration
More White Papers
Upcoming Events
Event Image
MILCOM 2015

Date: 26 to 28 October, 2015

Location: Tampa, Florida, Unites States

 
More Upcoming events
Featured Products this Week
RF Amplifier
Square Wave LO Buffer Amplifier from 1 GHz to 26 GHz

RF Amplifier from Marki Microwave

The A-126 is a single stage square wave buffer amplifier that operates from 1 GHz to 26 GHz. It requires a negative control voltage (of -0.7 V or -5V) and a positive bias voltage of 5 V. The amplifier provides a small signal gain of 13 dBm, saturated output power up to 20 dBm, noise figure of 3.5 dB.
 
Download Datasheet | Product Details
 
Directional Antennas
Multi-band Directional Antenna from 0.88 to 5.85 GHz

Directional Antennas from Cobham Antenna Systems

The LPA7-TRI-DS2450-DS5500/1090 from Cobham Antenna Systems is a multiband directional antenna that operates from 0.88 to 0.96 GHz, 1.71 to 1.88 GHz, 1.92 to 2.175 GHz, 2.4 to 2.5 GHz and 5.25 to 5.85 GHz. The antenna supportes GSM, DCS & UMTS Vertical polarization and ISM & UNII Dual Slant 45 degrees polarization.
 
Download Datasheet | Product Details
 
RF Amplifier
94 GHz Power Amplifier for Radar Applications

RF Amplifier from Arralis

The TU-W1330302 from Arralis is a three stage power amplifier that operates from 92 GHz to 96 GHz. It provides an output power of 23 dBm with a gain of 13 dB and a return loss of 10 dB. The amplifier was developed as part of a radar system front end with C/X band inputs and W-band outputs. Supporting components like upconverters, downconverters and switches were also developed.
 
Download Datasheet | Product Details
 
Fixed Attenuator
DC to 1 GHz Flanged Attenuators from 1 dB to 20 dB

Fixed Attenuator from API Technologies - Inmet

The PPA50 is a series of flanged attenuators from Aeroflex / Inmet that operates from DC to 1 GHz. They are available in attenuation configurations from 1 to 20 dB with 1 dB increments. The attenuators can handle up to 50 watts of power and have a VSWR of less than 1.5:1. They have a BeO substrate and a Nickle plated copper flange.
 
Download Datasheet | Product Details
 
RF Amplifier
15 GHz to 18 GHz Low Noise Amplifier with 26 dB Gain

RF Amplifier from Planar Monolithics Industries

The PE2-28-15G18G-4R0-13-12-SFF is a low noise amplifier that operates from 15 GHz to 18 GHz. The amplifier has a gain of 26 dB, P1dB of 13 dBm and a noise figure of 4 dB through the band. It requires a 12 to 15 V supply to operate while drawing 200 mA of current. It is available with SMA Male connectors.
 
Download Datasheet | Product Details
 
Between Series RF Adapter
Between Series Adapter for T&M (Custom Products available)

Between Series RF Adapter from MOLEX

Molex offers many types and styles of between series RF/Microwave adapters for test and measurement in the lab, as well as system bulkhead applications. The Between-Series Adapters provide transitions between popular coaxial connectors of differing interface (series).
 
Download Datasheet | Product Details
 
Bias Tee
Broadband DC Bias Tee

Bias Tee from HYPERLABS Inc.

The HL9440 from HyperLabs is a broadband DC bias tee (matched pair) that operates from 16 KHz to 18 GHz. This DC Bias Tee is designed to minimize reflections of high-speed signals at the DC insertion point. It allows for the insertion of a DC bias current into a circuit with minimal perturbation of the impedance of a 50 ohm transmission line.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
10 MHz to 6.6 GHz PXI Vector Signal Analyzer

RF Spectrum Analyzer from National Instruments

The PXIe-5663E from National Instruments is a PXI based vector signal analyzer that operates from 10 MHz to 6.6 GHz. It has a 50 MHz instantaneous bandwidth , 80 dB spurious free dynamic range and a noise floor of <-158 dBm/Hz at 1 GHz.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
100 kHz to 3.6 GHz, SignalHawk – Hand-held Spectrum Analyzer

RF Spectrum Analyzer from Bird Technologies

The SH-36S SignalHawkfrom Bird Technologies is a Spectrum Analyzer that operates from 100 kHz to 3.6 GHz. This hand held analyzer can be used for installing, maintaining and troubleshooting all segments of RF communication systems.
 
Download Datasheet | Product Details
 
Horn Antenna
Dual Polarized Horn Antennas from 6 GHz to 50 GHz

Horn Antenna from Flann Microwave

The DP241 from Flann are multi-octave, quad-ridged horn antennas that operate from 6 GHz to 50 GHz. They are available in two configurations 18 GHz to 40 GHz and 6 GHz to 50 GHz. The antennas have a gain from 10 to 18 dB and support both horizontal and vertical polarization.
 
Download Datasheet | Product Details
 
Power Divider
30 W Power Dividers from 500 MHz to 6 GHz

Power Divider from MECA

The 80X-4-3.250WWP broadband line of power dividers from MECA operate from 500 MHz to 6 GHz. They are available in 2, 4, 8 & 16-Way configurations and suited for indoor and outdoor applications. These power dividers can handle up to 30 W of power with an isolation from 17 to 20 dB, an insertion loss under 2.1 dB and a VSWR under 1.30:1. They are IP67 rated and are available with Type N, SMA, BNC, TNC and 7/16 DIN connector options.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.