PREV 7 October, 2015 NEXT

New RF & Microwave Products this Week

7th Oct, 2015 - everything RF Newsletter
 
everything RF
Date: 7th Oct, 2015
 
Sponsored by Mouser
 
 
 
New RF & Microwave Products this Week
RF Module
Worlds Smallest Bluetooth Low Energy Module

RF Module from TDK RF Solutions

The SESUB-PAN-D14580 from TDK is a Bluetooth V4.1 Smart Single Mode Module that is built for wearable devices. It is available in space saving ultra-small package that measures 3.5 x 3.5 x 1.0 mm. It consumes very low power with a current consumption of 5 mA when transmitting and 5.4 mA with receiving with 0. 8 µA in standby mode based on a 3 V supply.
 
Download Datasheet | Product Details
 
Transceiver
Multi-Channel Programmable RF Transceiver Chip

Transceiver from Melexis

The MLX73290-M from Melexis is a multi-channel transceiver chip that operates from 300 MHz to 930 MHz. The transceiver delivers two RF channels, each with a programmable RF power transmitter and a highly sensitive RF receiver. It is fully programmable via its serial peripheral interface (SPI). It provides an output power from -20dBm to 13dBm with a receiver sensitivity can attain -120 dBm in a 15 kHz bandwidth.
 
Download Datasheet | Product Details
 
Transceiver
FPRF MIMO Transceiver IC with Integrated Microcontroller

Transceiver from Lime Microsystems

The LMS7002M from Lime Microsystems is a field programmable radio frequency (FPRF) transceiver IC that operates from 100 kHz to 3.8 GHz. It can be used in wide range of consumer and professional applications including small cell communication equipment, M2M Networks, Test Equipment, PC's, SDR and many others.
 
Download Datasheet | Product Details
 
PXI RF Signal Transceiver
3/6 GHz PXI Vector Signal Transceiver

PXI RF Signal Transceiver from Keysight Technologies

The M9420A from Keysight Technologies is a VXT PXIe Vector Transceiver that provides vector signal generation and analysis in four slots of a PXI Chasis. The VXT is purpose-built for rapid solution creation and faster throughput in manufacturing test of wireless components and IoT devices. It operates from 60 MHz to 3/6 GHz and provides a 160 MHz I/Q bandwidth in both vector signal generation and analysis.
 
Download Datasheet | Product Details
 
RF Test Set
6 GHz PXI-Based Wireless Production Test System

RF Test Set from National Instruments

The Wireless Test System from National Instruments dramatically lowers the cost of high-volume wireless manufacturing testing. This Test Set can be used to test a range of wireless technologies including Bluetooth, WiFi, GPS and Cellular including LTE-Advanced. The WTS combines the latest advances in PXI hardware to offer a single platform for multi-standard, multi- DUT and multi-port testing.
 
Download Datasheet | Product Details
 
Diplexer
Satellite L-Band Mux-Tee for Powering Up Converters and LNBs

Diplexer from Mini Circuits

The ZABT-2R15G+ from Mini Circuits is a combined bias tee and diplexer or “Mux Tee” designed specifically for satellite communications and wireless infrastructure applications. As a bias tee it operates from 10 MHz to 2150 MHz and as a Diplexer it has a frequency from 950 to 2150 MHz. It has an additional functionality to inject 10 MHz reference clock without additional components. Built in a rugged shielded case.
 
Download Datasheet | Product Details
 
RF Amplifier
Power Amplifier Series from 17 GHz to 66 GHz

RF Amplifier from HXI

The HMPA Series from HXI is a range of power amplifiers modules that are available in a number of frequency configurations from 17 GHz to 66 GHz. The modules provide a P1dB up to 30 dBm and gain up to 35 dB. Each amplifier contains a voltage regulator and bias sequencing circuitry that allows the use of a single bias to power the amplifier.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
Mouser
FREE MultiSIM BLUE Update Download.
Scheme, simulate, PCB layout, BOM and purchase using one tool. Get the latest version – FREE. Updated features include 6,000 new components added (over 100k currently), MCU co-simulation, new voltage, current and power probes, plus faster analysis mode. Discover how good became even better.Learn More
 
 
 
RF Amplifier
200 to 3800 MHz Low-Noise Amplifier Small Cell Base Stations

RF Amplifier from Skyworks

The SKY67159-396LF from Skyworks is a LNA that operates from 200 MHz to 3800 MHz. It has been designed for FDD and TDD 2G/3G/4G LTE small-cell base stations, land mobile radios and military communications applications. The amplifier can provide a gain of up to 17.5 dB, noise figure of under 1.3 dB and an IP3 up to 31 dB.
 
Download Datasheet | Product Details
 
RF Amplifier
700 MHz to 6 GHz Class AB GaN Power Amplifier

RF Amplifier from Triad RF Systems

The TA1049 from Triad RF Systems is a class AB GaN power amplifier module that operates from 600 MHz to 6000 MHz. It has been designed for both military and commercial applications and to support any signal type and modulation format, including 3-4G telecom, WLAN, OFDM, DVB, and CW/AM/FM.
 
Download Datasheet | Product Details
 
RF Amplifier
Hybrid Power Doubler Amplifier from 45 MHz to 1218 MHz

RF Amplifier from Qorvo

The RFPD3210 from RFMD is a hybrid power doubler amplifier module that operates from 45 MHz to 1218 MHz. It provides a gain of 22.8 dB, a noise figure of 3 dB, CSO of -76 dBc and CTB of -73 dBc. The module provides excellent linearity and superior return loss performance. It requires a supply of 24 V while drawing 470 mA of current. It is available in a SOT115J package.
 
Download Datasheet | Product Details
 
RF Switch
Low Power SPDT Switch from 20 MHz to 3 GHz

RF Switch from Skyworks

The SKYA21001 is a SPDT switch that operates from 20 MHz to 3 GHz. The switch has a low insertion loss of 0.3 dB at 0.9 GHz, a P1dB of 30 dbm and an IP3 of 43 dBm. It requires positive voltage for operation and consumes low DC power. The SKYA21001 can be used for number of applications and is available in a compact 2 x 1.25 mm 6 pin SC-70 package.
 
Download Datasheet | Product Details
 
Fixed Attenuator
DC to 50 GHz, 2.4 mm Attenuators from 3 to 30 dB

Fixed Attenuator from XMA Corp

The 8582-6X50-DB from XMA Corp. is fixed attenuator that operates from DC to 50 GHz. It is available in attenuation configurations of 3 dB, 6 dB, 10 dB, 20 dB and 30 dB. This attenuator has a VSWR under 1.75:1 and can handle up to 1 W of average power. It has a 2.4 mm Male to Female connector interface.
 
Download Datasheet | Product Details
 
Power Divider
4 Way Power Divider for 2.5 & 5 GHz WiFi Bands

Power Divider from P1dB Inc.

The P1PD-SAF-0206G30W-4 is a 4 way power divider that operates from 2 to 6 GHz. It has a low insertion loss of 1.3 dB, an isolation of over 25 dB and can handle up to 30 W of average power. The divider is matched to 50 ohms and has a VSWR of under 1.3:1. It is optimized for 2.4 and 5 GHz WiFi bands and is available with SMA female connectors.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
Signal and Spectrum Analyzer from 2 Hz to 85 GHz

RF Spectrum Analyzer from Rohde & Schwarz

The R&S FSW85 is a high-performance signal and spectrum analyzer that operates up to 85 GHz (part of the R&S FSW Series). The analyzer is ideally suited for automotive radar, 5G/other wireless standards and aerospace/defence applications. It has a 12.1 in.(31 cm) high resolution touchscreen display and can run multiple measurement applications and display them in parallel.
 
Download Datasheet | Product Details
 
Drop-In Circulator
Drop-In Circulator from 1.2 GHz to 2 GHz

Drop-In Circulator from Renaissance Electronics Corporation

The 3G3NBJ from Renaissance is a drop-in circulator that operates from 1.2 GHz to 2 GHz. It has an isolation up to 10 dB, an insertion loss up to 1.3 dB and a VSWR under 2:1. The drop-in isolator design is covered under a US Patent that provides a broadband match and power handling using a unique steel housing.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.