1. everything RF
  2. RF Newsletters
more
PREV 21 October, 2015 NEXT

New RF & Microwave Products this Week

21 October, 2015 - everything RF Newsletter
 
everything RF
Date: 21 October, 2015
 
Stay Up to date with the Wifi / Bluetooth Indutry
 
 
 
Latest RF & Microwave Products this Week
RF Module
Bluetooth Low Energy & 802.15.4 Wireless MCU

RF Module from Freescale

The KW41Z from Freescale is a multi-mode radio MCU that support concurrent operation of IEEE® 802.15.4 and Bluetooth Low Energy connectivity. This MCU has up to 512 KB Flash and up to 128 KB SRAM on chip to meet the requirements of the target applications. The device also supports the latest Bluetooth specification v4.2, and offers exceptional RF performance with an on-chip balun facilitating wider coverage, better interference immunity, lower power and complexity, and fewer RF front-end components for a robust design.
 
Download Datasheet | Product Details
 
RF Power Meter
6 GHz USB/Ethernet Controlled Frequency Counter & Power Meter

RF Power Meter from Mini Circuits

The FCPM-6000RC from Mini-Circuits is an integrated frequency counter and power meter that enables synchronized measurement of signal frequencies and power levels from a single device. It can measure signals with frequencies from 1 MHz to 6 GHz and has a power range from -30 dBm to 20 dB with a 1 Hz/0.01 dB resolution and a 30 ms measurement speed.
 
Download Datasheet | Product Details
 
Band Pass Filter
Universal-Footprint RF Filters and Duplexers for LTE & WiFi

Band Pass Filter from CTS Electronic Components

The CTS UPB550A Bandpass Filter has an insertion loss below 1 dB (0.7 dB typical), while providing over 50 dB rejection across all the major FDD bands. This enables it to meet the receive sensitivity requirements when co-located with any basestation power class.
 
Download Datasheet | Product Details
 
Band Stop Filter
YIG Tuned Band-Reject Filters from 125 MHz to 18 GHz

Band Stop Filter from Teledyne Microwave

This YIG Tuned Series of Band Reject Filters from Teledyne Microwave are available in multiple frequency configurations from 125 MHz to 18 GHz. The filters have a low insertion loss in the passband and high isolation in the notch. They can handle up to 10 dBm of input power and are ideal for electronic warfare (EW), electronic countermeasures (ECM), and microwave receiver applications.
 
Download Datasheet | Product Details
 
RF Switch
Absorptive SPST Switch from DC to 40 GHz

RF Switch from PMI RF

The P1T-DC40G-65-T-24FM-1NS from PMI RF is an SPST absorptive switch that operates from DC to 40 GHz. It has a high isolation of over 65 dB and a low insertion loss under 5.5 dB through the band. The switch can handle up to 17 dBm of CW power and has a VSWR of 2:1.
 
Download Datasheet | Product Details
 
RF Mixer
Balanced Waveguide Mixers from 26.5 to 140 GHz

RF Mixer from Millitech

The MXP Series from Millitech is a range of high performance broadband mixers that operate from 26.5 to 140 GHz in seven waveguide bands from WR-28 through WR-08. The mixers have a LO drive power of 13 dBm, low conversion loss of under 6 dB and isolation over 25 dB (LO/RF and LO/IF).
 
Download Datasheet | Product Details
 
Directional Coupler
30 Watts, SMA Directional Couplers from 0.5 to 18 GHz

Directional Coupler from P1dB Inc.

The P1CP-SAF-R518G30W-XX from P1dB is a directional coupler that operates from 0.5 to 18 GHz. They are available in 10 dB, 20 dB and 30 dB coupling configurations (other coupling values are availabl on request). The couplers can handle up to 30 watts of input power and have a directivity performance of up to 20 dB. They are available with SMA connectors and are matched to 50 Ohms.
 
Download Datasheet | Product Details
 
Software
NI AWR NI AWR Design Environment Version 12

Software from National Instruments

V12 release of NI AWR Design Environment provides the most comprehensive, powerful, and easy-to-use suite of software design tools for the microwave and radio frequency (RF) communities. The NI AWR Design Environment integrates key technologies within a single environment - Microwave Office circuit design software is a complete suite of tools featuring state-of-the-art circuit simulators, layout creation, and electromagnetic (EM) simulation.
 
Download Datasheet | Product Details
 
Laminate
Microwave PCB Laminate with Enhanced Thermal Conductivity

Laminate from Arlon

The TC600 from Arlon is an enhanced thermal conductivity ceramic filled PTFE/Woven fiberglass laminate for microwave printed circuit boards. It has a dielectric constant of 6.15 (Dk) and a dissipation factor (Df) of 0.0020 at 10 GHz (it goes a little higher when the frequency goes above 20 GHz).
 
Download Datasheet | Product Details
 
Signal Generator
6 GHz EMC Signal Generator Plug-in Card

Signal Generator from DARE!! Instruments

RadiGen Series from Dare Instruments is range of EMC RF signal generators that operate from 9 kHz to 6 GHz. The signal generators can be used for EMC tests requiring AM or Pulse modulation. For AM modulation it covers a frequency range from 10 Hz up to 100 kHz with a modulation depth of 5 % to 95%.
 
Download Datasheet | Product Details
 
RF Transistor
2.7 GHz to 3.5 GHz GaN HEMT for LTE and Radar Applications

RF Transistor from Wolfspeed

The CGHV35060MP from Wolfspeed is a GaN HEMT that operates from 2700 MHz to 3500 MHz. This transistor is available in a small 6.5mm x 4.4mm plastic surface mount (SMT) package. This transistor provides an output power of over 75 Watts with a gain of more than 13.8 dB and efficiency of over 61% through the band. It is ideal for S Band Radars and LTE base stations.
 
Download Datasheet | Product Details
 
RF Transistor
DC to 2700 MHz GaN HEMT for Pulsed and CW Applications

RF Transistor from Wolfspeed

The CGHV27060MP is a 50V/60W broadband GaN HEMT which is optimized for both linear and pulsed applications from DC to 2700 MHz. The transistor is available in a small plastic SMT package that measures 4.4mm x 6.5mm. This GaN HEMT is well suited for LTE micro base station amplifiers with 10–15W average power and high efficiency topologies, such as Doherty or Class A, B, and F amplifiers.
 
Download Datasheet | Product Details
 
Transceiver
928 MHz Remote Control Transceiver Module

Transceiver from Linx Technologies

The HUM-900-RC from Linx Technologies is a wideband transceiver with microcontroller that is operates from 928 MHz. It includes a Frequency Hopping Spread spectrum (FHSS) protocol. The transceiver has 8 status lines that can be individually configured as inputs to register button presses or as outputs to drive application circuitry.
 
Download Datasheet | Product Details
 
Transceiver
2.4 GHz Remote Control Transceiver Module

Transceiver from Linx Technologies

The HUM-2.4-RC from Linx Technologies is a wideband transceiver with microcontroller that is operates from 2400 to 2483 MHz. It includes a Frequency Hopping Spread spectrum (FHSS) protocol. The transceiver has 8 status lines that can be individually configured as inputs to register button presses or as outputs to drive application circuitry.
 
Download Datasheet | Product Details
 
Band Pass Filter
2.4 GHz WiFi-Bluetooth / LTE Coexistence Filter

Band Pass Filter from Qorvo

The TQQ0041E from Qorvo is a high power Bulk Acoustic Wave (BAW) band-pass filter that operates at 2442 MHz with a 79 MHz bandwidth. It has been designed to enable coexistence of WiFi and LTE signals within the same device or in close proximity to one another. The filter has extremely steep skirts with high near-in rejection in the approximate LTE bands and has a low insertion loss of 1.3 dB. It is available in Pb-free module package that measures 1. 1 x 0.9 x 0.50 mm.
 
Download Datasheet | Product Details
 
RF Switch
DC to 26.5 GHz, SP6T Switch for Military, Commercial Applications

RF Switch from Dow-Key Microwave

The Reliant Switch from Dowkey is a SP6T bidirectional coaxial switch designed for automated testing and operates from DC to 26.5 GHz. It has an insertion loss of 0.3 dB, an isolation of 100 dB and a third order intermodulation of -120 dBc.
 
Download Datasheet | Product Details
 
GPS/GNSS Antenna
Compact, Light Weight, High Performance GPS Antenna

GPS/GNSS Antenna from Maxtena

The M1575HCT-22P from Maxtena is a passive antenna that operates in the GPS L1 band. It is built on Helicore technology that provides exceptional pattern control, polarization purity and high efficiency in a very compact form factor. The antenna weighs only 2 grams and is ideal for the most demanding, mechanically constrained platforms including handheld devices, asset tracking, seismic recording instruments.
 
Download Datasheet | Product Details
 
RF Switch
SP4T HMIC PIN Diode Switch from 50 MHz to 20 GHz

RF Switch from MACOM

The MASW-004103-1365 from MACOM is a SP4T HMIC (Heterolithic Microwave Integrated Circuit) silicon PIN diode switch that operates from 50 MHz to 20 GHz. The HMIC process results in low loss and high isolation through low millimetre-wave frequencies. It has an insertion loss up to 1.5 dB, an isolation over 50 dB and an IIP3 up to 64 dBm.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.