1. everything RF
  2. RF Newsletters
more
PREV 4 November, 2015 NEXT

New RF & Microwave Products this Week

4 November, 2015 - everything RF Newsletter
 
everything RF
Date: 4 November, 2015
 
Sponsored by Mouser
 
 
 
New RF & Microwave Products this Week
Termination
1750 Watt Flanged RF Termination DC to 1 GHz

Termination from Barry Industries

The T50R0-1750-1X from Barry Industries is a thick film on Beryllium Oxide (BeO) flange mount RF termination that operates from DC to 1 GHz. It can handle up to 1740 Watts with a return loss of 20 dB and is matched to 50 Ohms. The flange and input tabs are constructed of robust silver plated Copper.
 
Download Datasheet | Product Details
 
RF Amplifier
30 Watt S-Band Power Amplifier for Comms & Electronic Warfare

RF Amplifier from NuWaves Engineering

The NuPower 05E05A is a compact and highly efficient solid-state power amplifier (PA) module for S-band applications. The amplifier operates from 2000 to 2600 MHz and provides 30 Watts of CW power on average and near-constant-envelope waveforms.
 
Download Datasheet | Product Details
 
Omni-Directional Antenna
Chip Antenna for GPS/BDS/GLNSS + BLE/WiFi Applications

Omni-Directional Antenna from Johanson Technology

The 2450AD47A1590 from Johanson Technology is a small chip antenna for GPS/GLNSS+BLE/WiFi/WLAN for portable, wearable fitness and tracking systems. This small antenna component has two separate antenna feeds, one for 2.45GHz functionality and positioning location systems, saving designer precious board space while maintaining high performance.
 
Download Datasheet | Product Details
 
Omni-Directional Antenna
LTE Ready Multi-Band MIMO Antenna from 698 MHz to 2690 MHz

Omni-Directional Antenna from CCI

The IDA-30F-KE-H2-Cx Hot Spot Multi-Band Antenna from CCI Products is an LTE ready multi-band MIMO antenna that covers the full 698 to 960 MHz and 1695 to 2690 MHz spectrum. This antenna uses a unique patented architecture that provides a constant 30° horizontal by 30° vertical pattern over the full operating frequency range.
 
Download Datasheet | Product Details
 
VNA
1 Port Vector Network Analyzer from 85 MHz to 14 GHz

VNA from Copper Mountain Technologies

The Planar R140 VNA is a 1-port USB powered VNA that operates from 85 MHz to 14 GHz. The VNA is the size of a deck of cards and can be controlled by any Windows PC or laptop. The R54 provides a wide variety of analysis capabilities, including time-domain with gating and DTF measurements at no additional cost.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
Mouser
Mouser Delivers Full Range of RF Solutions from Analog Devices.
From antenna to bits and back, Analog Devices offers more than 2,000 high-performance data converters, RF and microwave IC products that cover the full frequency range from DC to 110GHz and beyond. Learn More
 
 
 
Vector Network Analyzer
1 Port Vector Network Analyzer from 150 kHz to 6 GHz

Vector Network Analyzer from Anritsu

The ShockLine MS46121A Series is a 1 Port USB controlled VNA (Vector Network Analyzer). It is available in two frequency options from 40 MHz to 4 GHz and 150 kHz to 6 GHz. It provides performance and accuracy for 1 port measurements in a low cost and compact solution that can connect directly to the device under test.
 
Download Datasheet | Product Details
 
RF Switch
High Power Solid-State Transfer Switch from 250 MHz to 1250 MHz

RF Switch from UMCC

The SR-AV0H-TS from UMCC is a Solid State Transfer-Switch that operates from 250 MHz to 1250 MHz. It has an insertion loss of under 0.5 dB, an isolation of 32 dB and a VSWR under 1.2:1. The switchhas a rise/fall time of 450 ns and can handle up to 43 dBm of average CW power and peak power up to 50 dBm.
 
Download Datasheet | Product Details
 
RF Switch
DC to 26.5 GHz, SPDT Switch for Military, Commercial Applications

RF Switch from Dow-Key Microwave

DC to 26.5 GHz, SPDT Switch for Military, Commercial Applications
 
Download Datasheet | Product Details
 
RF Module
Micro-Sized Bluetooth Dual Mode Module

RF Module from Amped RF

The BT53 from Amped RF is a micro-sized Bluetooth module that supports both Bluetooth Classic and Low Energy, version v4.1. It provides fully embedded, ready to use Bluetooth wireless technology with a range of up to 80 m LOS. The module has a speed of 1.5 Mbps data throughput and has 128-bit encryption security.
 
Download Datasheet | Product Details
 
RF Module
Bluetooth V4.1 Smart (Low Energy) Single Mode Module

RF Module from TDK RF Solutions

The SESUB-PAN-D14580 from TDK is a Bluetooth V4.1 Smart Single Mode Module that is built for wearable devices. It is available in space saving ultra-small package that measures 3.5 x 3.5 x 1.0 mm. It consumes very low power with a current consumption of 5 mA when transmitting and 5.4 mA with receiving with 0. 8 µA in standby mode based on a 3 V supply.
 
Download Datasheet | Product Details
 
Power Divider
16 Way Power Divider from 2 GHz to 8 GHz

Power Divider from VidaRF

The VPD-2080A16 is a 16 Way Power Divider that operates from 2 to 8 GHz. It has an insertion loss of under 2.8 dB and isolation of over 18 dB with a VSWR of 1.6:1. The divider can handle up to 20 watts of power and up to 1 watt of reverse power. It is available in a module that meets IP65 standards with SMA S/Steel connectors.
 
Download Datasheet | Product Details
 
RFID Tag
Multi-Surface UHF RFID Tag from 902 to 928 MHz

RFID Tag from Xtreme RFID

The Allied RFID VX-Mid MS is a multi-surface UHF RFID tag for manufacturing, construction, agriculture and transportation applications. The RFID tag operates from 902 to 928 MHz with user memory of 512 bits and EPC memory of 96 bits.
 
Download Datasheet | Product Details
 
OCXO
Rugged OCXO’s for Military Applications

OCXO from MTI-Milliren Technologies

The 222 Series from MTI-Milliren is a range of rugged OCXOs for demanding military applications such as UAVs, rotorcraft, and tracked vehicles. These OCXOs are especially designed for applications that require significantly reduced acceleration sensitivity which can’t be obtained through conventional solutions.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
Programmable PXI Step Attenuator from DC to 50 GHz

RF Variable Attenuator from Keysight Technologies

The M9169E from Keysight is a 3-port PXI programmable step attenuator module that operates across a broad frequency range of DC to 50 GHz. It has a switchable path for a calibrator signal (cal input) into the input of a signal analyzer to improve amplitude accuracy.
 
Download Datasheet | Product Details
 
Duplexer
Cavity Duplexer from 2365 MHz to 2495 MHz

Duplexer from Anatech Electronics

The AE2400-2470D489 from Anatech Electronics is a cavity duplexer with pass bands from 2365 MHz to 2435 MHz and 2445 MHz to 2495 MHz. It has an insertion loss of less than 4.7 dB, an isolation of 80 dB and return loss of 17 dB. The duplexer can handle over 20 W of power.
 
Download Datasheet | Product Details
 
90 Degree Hybrid Coupler
3 dB Quad Hybrid Coupler from 2.4 GHz to 2.5 GHz

90 Degree Hybrid Coupler from Response Microwave

The RMHY3.2400-2500Sf from Response Microwave is a 3 dB 90° quadrature hybrid coupler that operates from 2.4 GHz to 2.5 GHz. It has an insertion loss of 0.3 dB, VSWR of 1.25:1 and isolation of 20 dB and can handle up to 100 W.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.