PREV 25 November, 2015 NEXT

New RF & Microwave Products this Week

25 Nov, 2015 - everything RF Newsletter
 
everything RF
Date: 25 Nov, 2015
 
Sponsored by Inmet (API Technologies)
 
 
 
New RF & Microwave Products this Week
RF Spectrum Analyzer
Handheld Spectrum Analyzer for Field and Lab Measurements

RF Spectrum Analyzer from Rohde & Schwarz

The R&S Spectrum Rider is a light weight analyzer with a long battery life which can be used for high accuracy for measurements in the field and in the lab. It has a frequency range from 5 kHz to 2 GHz, which can be extended up to 4 GHz with a key code.
 
Download Datasheet | Product Details
 
RF Amplifier
1 GHz to 11 GHz MMIC Low Noise Amplifier

RF Amplifier from Analog Devices

The HMC753 from Analog Devices is a GaAs, HEMT MMIC low noise amplifier that operates from 1 GHz to 11 GHz. It provides a P1dB of 18 dBm, a noise figure of 1.5 dB, an IP3 of 30 dBm with a small signal gain of 16.5 dB. The amplifier requires a 5 V power supply and draws 55 mA of current.
 
Download Datasheet | Product Details
 
Diplexer
Low Loss Coaxial Diplexers from 0.68 GHz to 11.40 GHz

Diplexer from Maury Microwave

The DP series from Maury Microwave is a range of diplexers that operate with a harmonic frequency from 0.68 GHz to 5.70 GHz and 2nd harmonic frequency from 1.36 GHz to 11.40 GHz (Multiple frequency configurations are available). The diplexers have an insertion loss of less than 1.03 dB and can handle up to 100 W of average power.
 
Download Datasheet | Product Details
 
RF Amplifier
Compact Non-ITAR Wideband GaN Amplifiers

RF Amplifier from Teledyne Microwave Solutions

Teledyne Microwave Solutions (TMS) has introduced a new line of wideband compact GaN amplifiers that operate from 0.1 GHz to 6.0 GHz frequency range. Depending on frequency band, output power ranges between 15 and 40 watts. Each amplifier includes preamp and driver stages to produce a minimum overall gain of 50 dB. Theses GaN amplifiers meet the most stringent airborne requirements of the most demanding commercial and military applications.
 
Download Datasheet | Product Details
 
RF Module
Bluetooth Low Energy Compact IC

RF Module from Toshiba

The TC35675XBG from Toshiba is a Bluetooth IC that supports both Flash ROM and NFC Forum Type 3 Tag for peer-to-peer communications. It has a receiver sensitivity of -92.5 dBm and low power consumption of less than 6 mA at peak consumption and less than 100 nA in deep sleep at 3.3 V.
 
Product Details
 
Front End Module
2.4 and 5 GHz WiFi Integrated Front End Module

Front End Module from Qorvo

The TQF6174 is a WLAN dual band front end module for IEEE 802.11ac, 802.11n WLAN systems. It consists of integrated dualband diplexer + coupler, 2.4 GHz BAW WiFi coexistence filter, and 5 GHz PA, LNA, and Switch which is internally matched to 50 ohms.
 
Download Datasheet | Product Details
 
Sponsored by Inmet (API Technologies)
Variable Attenuator - Inmet
Meet the New Magic Number for 2 Watt Temperature Variable Attenuators
Push the limits of frequency without sacrificing performance. Aeroflex/Inmet’s new DC to 12 GHz Powerfilm surface mount attenuators vary with temperature and are the perfect balance of price, power, and dependability To learn more, download the data sheet.
 
 
 
Horn Antenna
0.8 to 18 GHz Linearly Polarised Wideband Ridged Horn Antenna

Horn Antenna from Steatite Q-par Antennas

The QWH-SL-0.8-18-N-SG from Steatite Q-par Antennas is a linearly polarized horn antenna that operates from 0.8 GHz to 18 GHz. It has a gain from 2.8 dBi to 43.8 dBi, a VSWR under 4:1 and can handle up to 500 W of CW power. It is available with Type N connectors and is suitable for EMC testing and general measurement applications.
 
Download Datasheet | Product Details
 
Omni-Directional Antenna
Dual-Band Flexible Wi-Fi Antenna

Omni-Directional Antenna from Antenova

The Amoris from Antenova is a flexible antenna for use with all Wi-Fi applications - 2.4 to 2.5 GHz / 4.9 to 5.9GHz. The antenna has an efficiency of over 70% with an average gain of -1.3 dBi. A flexible antenna with cable enables direct connection to the host PCB. It is available in 3 standard cable lengths of 50mm, 100 mm and 150 mm and measures 27 x 14 x 0.15 mm.
 
Download Datasheet | Product Details
 
In Series RF Adapter
1.85mm Coaxial Adapters from DC to 67 GHz

In Series RF Adapter from KRYTAR

The Model 4030 from Krytar is a Female to Male 1.85mm coaxial adapter that operates from DC to 67 GHz. It can be used in a wide array of wireless communications applications, test equipment, and antenna devices for both commercial and military markets. It has a low VSWR of 1.25:1, an insertion loss up to 0.040*vf GHz and an RF leakage of less than -100 dB.
 
Download Datasheet | Product Details
 
Power Divider
3 Way Combiner/Divider from 30 MHz to 500 MHz

Power Divider from Werlatone Inc

The D9866 from Werlatone is a 3-way divider/combiner that operates from 30 MHz to 500 MHz. It can handle up to 750 W of CW power with full port-to-port isolation of over 20 dB and an insertion loss of 1 dB. The divider is available in a module with N Female, 7/16 Female and SC Female connectors. It has been designed for the lowest loss and severe input unbalances.
 
Download Datasheet | Product Details
 
RF Test Set
Cost Effective GNSS Production Tester

RF Test Set from Rohde & Schwarz

The R&S SMBV-P101 is a GNSS production tester designed for GNSS chipset testing and speed-optimized production testing of GNSS receivers. It supports GPS, Glonass, BeiDou and Galileo. The device provides flexibly customizable navigation data and movement profiles for verifying the maximum movement dynamics of a GNSS receiver.
 
Download Datasheet | Product Details
 
PXI RF Vector Network Analyzer
PXIe Multiport Vector Network Analyzer from 1 MHz to 9 GHz

PXI RF Vector Network Analyzer from Keysight Technologies

The M9485A is a multiport PXI Vector Network Analyzer from Keysight that has been designed for high-volume wireless component manufacturing of front-end modules, switches and filters used in mobile phones and base stations. It can support applications from 1 MHz to 9 GHz and provides excellent measurement speeds.
 
Download Datasheet | Product Details
 
Software
NI AWR Design Environment

Software from National Instruments

The NI AWR Design Environment V12 integrates Microwave Office, Analog Office, Visual System Simulator and Analyst. It provides a comprehensive, powerful, and easy-to-use suite of software design tools for the microwave and radio frequency (RF) communities. This software package integrates key technologies within a single environment - Microwave Office circuit design software is a complete suite of tools featuring state-of-the-art circuit simulators, layout creation, and electromagnetic (EM) simulation.
 
Download Datasheet | Product Details
 
RF Mixer
Millimeter-Wave Waveguide Frequency Mixers

RF Mixer from Pasternack Enterprises Inc

These waveguide frequency mixers operate over RF and LO frequency bands ranging from 26.5 to 110 GHz with an IF frequency covering DC to 18 GHz. Depending on the model, conversion loss ranges from 6 to 9 dB typical with 20 dB typical RF to LO isolation. Maximum RF input power is +5 dBm and performance is specified over an operating temperature of 0°C to +50°C. Rugged gold plated package designs are thermally stable for high reliability and feature compact dimensions with integrated waveguide sizes ranging from WR-28 to WR-10.
 
Download Datasheet | Product Details
 
Frequency Doubler
Broadband X2 Passive Frequency Multiplier from 8 GHz to 15 GHz

Frequency Doubler from Custom MMIC

The CMD227 die is a passive frequency doubler with an input frequency from 8 GHz to 15 GHz. The doubler has a 4 dB conversion loss at an output frequency of 23 GHz, with Fo and 3Fo isolations greater than 40 dBc and 43 dBc respectively. The CMD227 is matched to 50 ohms, eliminating the need for external DC blocks and RF port matching.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.