 | March 19th, 2014 |
|
 New RF & Microwave Products this Week |
|
|  | RF Amplifier from Cree The CMPA5585025F is a gallium nitride (GaN) High Electron Mobility Transistor (HEMT) based monolithic microwave integrated circuit (MMIC). This power amplifier operates from 5.5 GHz to 8.5 GHz and can provide up to 35 W of saturated power, 25 W of p1dB and a gain of 25 dBm. It is ideal for point to point radios, communications and satellite communication uplinks. Download Datasheet | Product Details
|
| | |
|
|  | Spatium Amplifier from Triquint The KU250W-1416 is a power amplifier that utilizes patented Spatium™ combining technology to provide exceptional Solid-State Power Amplifier (SSPA) performance. This amplifier is an excellent alternative to the Traveling Wave Tube Amplifiers (TWTA) and operates from 14.4 GHz to 16 GHz with a saturated power of over 250 W at 20% efficiency. It is available in a compact light weight package that is ideal for integration into Satcom BUC's and other microwave subsystems. Download Datasheet | Product Details
|
| | |
|
|  | Spatium Amplifier from Triquint The RM022020 is a bench top amplifier that operates from 2 to 20 GHz based on TriQuint's Spatium Technology. Spatium's high power and bandwidth capability provide a solid state alternative to TWTAs, which operate at high voltage and require complex and expensive external optimization networks to improve efficiency and linearity.This amplifier provides a saturated power of 15 W. Download Datasheet | Product Details
|
| | |
|
|  | GaN Amplifier from RFHIC The HT2627-15A from RFHIC is a 2 stage GaN hybrid power amplifier that operates at a frequency range from 2650 MHz to 2750 MHz. It provides a power gain of 25 dB to 30 dB, with a supply voltage of 28 V and draws 450 mA of current. It provides an average output power of 36 dBm and is ideal for use in RF sub-systems, base stations, repeaters, small cells and LTE systems. This device is available in a surface mount package that measures 20.5 x 15 x 3.5 mm. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from MACOM The MAAP-011106 is a E-Band power amplifier that has been developed for small cell wireless backhaul applications that enable datarates of 1 Gbps and higher to accommodate surging data demand, particularly in densely populated metro environments. The amplifier operates from 71 to 86 GHz to deliver a saturated power of 25.5 dBm, which is extremely high for an amplifier operating in the E-Band. It includes an integrated power detector and supports 20 dB of small signal gain with variable gain control for flexible performance tuning. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from Agile MwT The AMT-A0117 is a high linearity driver amplifier for commercial and military use. It operates from 100 MHz to 1500 MHz and provides a gain of 36 dB, P1dB of 34 dBm and has a noise figure of less than 4 dB. The amplifier requires a supply voltage of 15 V and is unconditionally stable. Download Datasheet | Product Details
|
| | |
|
|  | RF Mixer from Hittite The HMC 1106 is a double balanced mixer which can operate as an upconverter or a down converter with DC to 24 GHz at the IF port, 20 to 50 GHz at the LO port and 15 to 36 GHz at the RF port. This passive MMIC mixer is fabricated using GaAs Shottky diode technology and is available in the form of a die with the backside Ti/Au metallized and passivated for reliable operation. It is ideal for SATCOM, military, automotive radar and point to point radio applications. Download Datasheet | Product Details
|
| | |
|
|
|  | Coaxial Isolator from Renaissance Electronics Corporation The 2A8NEG is a high power X-Band coaxial isolator that operates from 9 to 9.6 GHz. It has an insertion loss of 0.5 dB, an isolation of over 16 dB, can handle up to 50 W of CW Power and 15 W of reflected power. It is available in a compact connectorized package that measures 1.00” x 1.12” x 0.52” and operates from -40 to 85 degrees C. Download Datasheet | Product Details
|
| | |
|
|  | Omni-Directional Antenna from Parsec Technologies, Inc. The PTA3.0 is broadband omni-directional Antenna for DAS applications such as cellular bands - 2G, 3G and LTE/4G bands between 380 MHz and 3 GHz. It provides a gain of 3 dB and an IM3/PIM of less than -160 dBc. The antenna has vertical polarization and can handle an input power of up to 100 W. It is designed for indoor installation and is available as a ceiling mount antenna with a 12" diameter and 5.8" in height. Download Datasheet | Product Details
|
| | |
|
|  | Front End Module from Skyworks The SKY85606-11 is a Flip Chip FEM that consists of an integrated SPDT switch and a low noise amplifier with bypass mode. It has been developed for switching between WLAN receive and WLAN transmit in 5 GHz 802.11ac systems. The module is available in a small, 15-bump, 1.04 x 1.04 mm Wafer Level Chip Scale Package (WLCSP). Download Datasheet | Product Details
|
| | |
|
|  | Front End Module from Skyworks The SKY85202-11 is a Flip Chip FEM that consists of an integrated SP3T switch and a low noise amplifier with bypass mode. It has been developed for switching between WLAN receive and WLAN transmit in 2.4 GHz 802.11ac systems. The module is available in a small, 15-bump, 1.04 x 1.04 mm Wafer Level Chip Scale Package (WLCSP). Download Datasheet | Product Details
|
| | |
|
|  | 90 Degree Hybrid Coupler from Wavelex The WHC0727A is a 90 Degree Hybrid coupler that operates from 700 MHz to 2700 MHz. The coupler can handle up to 10 W of power, has a low insertion loss of 0.5 dB and an isolation over 18 dB. It is available in a connectorized package with SMA connectors. The WHC0727A is ideal for LTE and land mobile radio (LMR), as well as RF bench test and mobile base station applications. Download Datasheet | Product Details
|
| | |
|
|
|  | RF Cable Assembly from Fairview Microwave The SCE1806-0505-48 is a 48 inch low loss test cable with N Type male connectors on either end. It can operate from DC to 18 GHz with a max VSWR of 1.35:1 and an insertion loss of 1.47 dB at 18 GHz. The connectors are stainless steel with BeCu center contact pin. Also available in a 36 inches. Download Datasheet | Product Details
|
| | |
|
|  | RF Cable Assembly from Fairview Microwave The SCE1811-0101-24 is a 24 inch low loss test cable with SMA male connectors on either end. It can operate from DC to 18 GHz with a max VSWR of 1.35:1 and an insertion loss of 1.2277 dB at 18 GHz. The connectors are stainless steel with BeCu center contact pin. Also available in 36 inch and 48 inch lengths. Download Datasheet | Product Details
|
| | |
|
Upcoming Event - Microwaves & RF 2014 |  | Microwaves & RF 2014 Starts Today The trade show is dedicated to radio frequencies, microwaves, wireless and fiber optics. Last year the show gathered over 2,000 highly qualified, professional visitors. This is one of the leading shows for this sector in Europe. |
|
|
|
