1. everything RF
  2. RF Newsletters
more
PREV 2 December, 2015 NEXT

New RF & Microwave Products this Week

2 Dec, 2015 - everything RF Newsletter
 
everything RF
Date: 2 Dec, 2015
 
Sponsored by Mouser
 
 
 
New RF & Microwave Products this Week
Power Divider
6 Way Power Splitter from 650 MHz to 2750 MHz

Power Divider from Mini Circuits

The ZN6PD-272HP+ from Mini Circuits is a 6 way power divider/combiner that operates from 650 MHz to 2750 MHz. It can handle up to 100 W of input power with a low insertion loss under 1 dB and isolation of 25 dB. The divider/combiner has an amplitude unbalance of 0.4 dB and phase unbalance of 4 degrees.
 
Download Datasheet | Product Details
 
RF Switch
SPDT Switch Maintains Port Impedance When Switching

RF Switch from Integrated Device Technology

The F2923 from IDT is a SPDT absorptive RF Switch that operates from 400 MHz to 8 GHz. This switch utilizes IDT’s Kz innovative design technology to maintain a near-constant impedance during transition and minimizes LO pulling in VCOs and reduces phase and amplitude variations in distribution networks.
 
Download Datasheet | Product Details
 
RF Switch
UltraCMOS SPDT RF Switch from 9 kHz to 26.5 GHz

RF Switch from Peregrine Semiconductor

The PE42522 is a SPDT absorptive switch that operates from 9 kHz to 26.5 GHz. This switch has been developed on Peregrine’s Ultra CMOS Silicon on Sapphire (Insulator) process. It has an insertion loss under 5.3 dB (through the band), an isolation over 22 dB and has an exceptional linearity with a high IP3 of 59 dBm.
 
Download Datasheet | Product Details
 
GPS/GNSS Module
Concurrent GNSS/GPS Chips with Jamming Immunity

GPS/GNSS Module from u-blox AG

The UBX-M8030 from u-blox is a range of standalone positioning chips which allow for concurrent reception of GPS/QZSS, GLONASS, BeiDou satellite signals. They are based on the high performance u-blox M8 position engine that delivers exceptional sensitivity and acquisition times.
 
Download Datasheet | Product Details
 
Block Up Converter
Block Converter Chassis Supports K-Band and L-Band Applications

Block Up Converter from Peak Communications Limited

The DBUH200 (Ka) from Peak Communications is a 19 inch 1U rack mounted DBUH200(Ka) chassis unit is designed to accept any mix of two Converter modules which span Ka-Band and L-Band frequencies. Modules can be inserted/replaced in the DBUH200(Ka) unit from the rear without the need to remove power or disturb the other channel in any way.
 
Download Datasheet | Product Details
 
Front End Module
Multimode Multiband FEM for GSM/WCDMA and LTE Bands

Front End Module from Skyworks

The SKY78072 (SkyOne®) from Skyworks is a hybrid, multimode, multiband (MMMB) front-end module that supports 2.5G and 3G/4G handsets and operates efficiently in GSM, GPRS, EDGE, TD-SCDMA, WCDMA, HSPA, and LTE modes.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
Mouser - Analog Devices
Mouser Delivers Full Range of RF Solutions from Analog Devices.
From antenna to bits and back, Analog Devices offers more than 2,000 high-performance data converters, RF and microwave IC products that cover the full frequency range from DC to 110GHz and beyond. Learn More
 
 
 
Omni-Directional Antenna
Isotropic Tracking Antenna from 9 kHz to 35 GHz

Omni-Directional Antenna from Aaronia AG

The IsoLOG 3D is an Isotropic RF 3D Tracking Antenna that operates from 9 kHz to 35 GHz. It includes a high density, customizable LPDA sector array which consists of at least 8 and up to 36 LPDA antennas, for horizontal and for vertical polarization. The antennas and the electronics are protected by a radome which can be ordered in any color with optional prints. The radome is watertight, shock resistant and heat-proofed to withstand even harsh conditions.
 
Download Datasheet | Product Details
 
Vector Network Analyzer
High Performance 4 Port VNA up to 8.5 GHz

Vector Network Analyzer from Anritsu

The MS46524B is a series of 4 Port ShockLine Vector Network Analyzers. This high performance VNA series can operate up to frequencies of 8.5 GHz and are ideal for testing multi-port mobile network equipment, mobile devices, automotive cables, high-speed data interconnects and system integration components.
 
Download Datasheet | Product Details
 
RF Amplifier
27 to 31 GHz GaN Power Amplifier

RF Amplifier from Qorvo

The TGA2594-HM from TriQuint is a GaN power amplifier that operates from 27 GHz to 31 GHz. Built on TriQuint’s 0.15um GaN on SiC process, the power amplifier provides a small signal gain of 25 dB, PAE of 25% and an output power of 36.5 dBm. It requires a supply of 20 V and draws 140 mA of current.
 
Download Datasheet | Product Details
 
Omni-Directional Antenna
Dual-Band Flexible Efficient Antenna for IoT Applications

Omni-Directional Antenna from Pulse Electronics

The Plume Series W3315B0100 is a flexible printed circuit antenna for dual-band WiFi applications. The antenna provides a maximum antenna gain of 2 dBi on the low band and 5dBi on the upper band with over 60% efficiency across the bands.
 
Download Datasheet | Product Details
 
GPS/GNSS Antenna
GNSS Antenna for GPS+GLONASS+BeiDou+Galileo Signal Reception

GPS/GNSS Antenna from NovAtel

The GPS-713-GGGL-N is a GNSS antenna from Novatel which receives GPS - L1, L2, L5, GLONASS - L1, L2, L3, BeiDou - B1, B2 and Galileo - E1, E5a/b signals. This antenna also supports L-Band applications from 1525 to 1560 MHz. It can be used for GPS only, dual or tripple constellation applications, resulting in increased flexibility and reduced equipment costs.
 
Download Datasheet | Product Details
 
Omni-Directional Antenna
Penta-band Cellular M2M and IoT Antenna

Omni-Directional Antenna from Parsec Technologies, Inc.

The PTA-700 is a penta-band omni-directional antenna for LTE/Cellular applications. The antenna operates in 5 bands from 699 to 894 MHz and 1710 to 2155 MHz. It has a gain of up to 1 dB, 60% efficiency and can handle up to 5 watts of power. The antenna edge mounts directly to a host PCB for low-loss, low-cost connection to the cellular transceiver.
 
Download Datasheet | Product Details
 
Frequency Doubler
Broadband Frequency Doubler with 15 GHz to 20 GHz Input

Frequency Doubler from Custom MMIC

The CMD213 die is an active frequency doubler with an input frequency from 15 GHz to 20 GHz. The doubler provides an output power of 17 dBm at an output frequency of 35 GHz, with Fo isolation greater than 46 dBc.
 
Download Datasheet | Product Details
 
RF Module
Bluetooth Low Energy Compact IC

RF Module from Toshiba

The TC35676FTG/FSG is a Bluetooth Low Energy (LE) IC that supports ver.4.1 communications. It has a receiver sensitivity of -92.5 dBm and low power consumption of less than 6 mA at peak consumption and less than 100 nA in deep sleep at 3.3 V. It has a 64KB user program area, achieved by increasing the internal SRAM size that allows its internal ARM® processor to execute various kinds of application programs.
 
Product Details
 
Fixed Attenuator
50 W Fixed Attenuator from DC to 3 GHz

Fixed Attenuator from Response Microwave Inc

The RMATxx.3000Nmf50 from Response Microwave is a range of fixed attenuators that operate from DC to 3 GHz. They have an attenuation up to 30 dB and a VSWR under 1.30:1. The attenuators can handle 50 W of average power and peak power of 100 W. They are available with variety of connectors.
 
Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.