1. everything RF
  2. RF Newsletters
more
PREV 9 December, 2015 NEXT

New RF & Microwave Products this Week

9 Dec, 2015 - everything RF Newsletter
 
everything RF
Date: 9 Dec, 2015
 
Sponsored by Inmet (API Technologies)
 
 
 
New RF & Microwave Products this Week
RF Amplifier
Ka-Band 100 Watt SSPA to Replace TWTA Amplifiers

RF Amplifier from Teledyne Paradise Datacom

The Model A2100 from Teledyne is a compact outdoor solid state power amplifier (SSPA) that operates from 29 GHz to 31 GHz (with custom frequency sub-bands options). This SSPA can generate power levels that exceed those of traveling wave tube amplifiers (TWTAs) commonly used at gateway earth stations today.
 
Download Datasheet | Product Details
 
Digital Phase Shifter
UltraCMOS 8-bit Digital Phase Shifter from 1.7 to 2.2 GHz

Digital Phase Shifter from Peregrine Semiconductor

The PE44820 from Peregrine is an 8-bit digital phase shifter based on Peregrine's UltraCMOS process (SOI). It supports a frequency range from 1.7 GHz to 2.2 GHz and is ideal for optimizing the transmission phase angle in the wireless infrastructure and radar markets. This phase shifter is easy to design-in, requires little PCB space and has flexible programming.
 
Download Datasheet | Product Details
 
Omni-Directional Antenna
Surface Mount Antenna for Multiple LTE Bands

Omni-Directional Antenna from Antenova

The Lucida Antenna (SR4L002) from Antenova is a surface mount antenna that has been developed for Multiple LTE Bands. It covers LTE 700, GSM 850, GSM 900, DCS 1800, PCS 1900, WCDMA 2100, LTE B7 (2500 - 2690 MHz,) LTE B40 (2300 - 2400 MHz). Lucida is an extremely small, ultra-low profile antenna, measuring only 35 x 8.5 x 3.2mm.
 
Download Datasheet | Product Details
 
RF Amplifier
Quad-band Multi-mode Power Amplifier for GSMK & UMTS

RF Amplifier from Avago Technologies

The ACPM-7788 from Avago Technologies is a multi-band, multi-mode power amplifier (PA) module that supports GMSK and 8-PSK modulation schemes and UMTS bands 1, 2, 3, 4, 34, 39, 5, 8, 13, 17, 20, 28A and 28B. It is compatible with MIPI RFFE and provide high efficiency. The amplifier is internally matched to 50 ohms and is housed in a fully matched 42-pin surface mount module that measures 5mm x 7mm.
 
Download Datasheet | Product Details
 
Front End Module
Bluetooth Low Energy Front End Module

Front End Module from Skyworks

The SKY66110-11 is a low power front-end module (FEM) that has been designed for Bluetooth Low Energy (BLE) applications from 2.4 to 2.485 GHz. It consists of an integrated PA with Antenna switch and a Bypass capacitor in the Rx chain. The FEM provides an output of 10 dBm. It requires a supply of 1.8 to 5 V and is available in 20-pin MCM package that measures 3.3 x 3.0 x 0.8 mm.
 
Download Datasheet | Product Details
 
Waveguide Mixer
Harmonic Mixers from 40 GHz to 110 GHz

Waveguide Mixer from Rohde & Schwarz

Rohde & Schwarz has a line of harmonic mixers that operate from 40 GHz to 110 GHz. They have a low conversion loss, high 1 dB compression point and high sensitivity. With their double-diode design, they can be operated without any additional biasing and its high LO frequency range and the low harmonics used significantly reduce the number of unwanted mixing products.
 
Download Datasheet | Product Details
 
Sponsored by Inmet (API Technologies)
API(Inmet) Attenuators
Meet the New Magic Number for 2 Watt Temperature Variable Attenuators
Push the limits of frequency without sacrificing performance. Aeroflex/Inmet’s new DC to 12 GHz Powerfilm surface mount attenuators vary with temperature and are the perfect balance of price, power, and dependability To learn more, download the data sheet.
 
 
 
RF Module
900 MHz & 2.4 GHz Multi-Purpose Wireless Modules

RF Module from Murata

The DNT Series from MuRata is a range of multi-purpose frequency hopping spread spectrum (FHSS) modules that operate at 900 MHz and 2.4 GHz. They are designed for sensor networking with long-range data rates of 38 kb/s to 500 kb/s even in the presence of electrical noise and multi-path fading.
 
Download Datasheet | Product Details
 
RF Module
Wi-Fi Mini-module for IoT Applications

RF Module from GainSpan Corporation

The GS2200M is a Wi-Fi Mini-module that provides a low-cost, convenient way for developers to add connectivity to their smart products, from commercial and industrial devices to smart home and audio/video applications, such as battery-powered cameras and security systems, all in a very compact size.
 
Product Details
 
Limiter
0.05 GHz to 6 GHz, 100 W VPIN Limiter

Limiter from Qorvo

The TGL2210-SM from Qorvo is a high-power receive protection limiter that operates from 0.05 GHz to 6 GHz. It has an insertion loss of less than 0.7 dB, can handle up to 100 W of incident power and has flat leakage of less than 17 dBm. The limiter has a recovery time of less than 115 ns and does not require bias.
 
Download Datasheet | Product Details
 
GPS/GNSS Module
Module for GPS/QZSS, GLONASS, BeiDou, QZSS and SBAS Signals

GPS/GNSS Module from u-blox AG

The NEO-M8 Series from u-blox is range of standalone concurrent GNSS modules which allows concurrent reception of GPS/QZSS, GLONASS, BeiDou, QZSS and SBAS signals. The series have a navigation sensitivity of -167 dBm. They have a display data channel (DDC) interface which provides connectivity and enables synergies with most u-blox cellular modules.
 
Download Datasheet | Product Details
 
GPS/GNSS Antenna
Low Profile, High Performance GNSS Antenna Made from FR4

GPS/GNSS Antenna from Antenova

The SR4G008 (Sinica) from Antenova is a GNSS antenna that operates from 1559 MHz to 1609 MHz. This antenna uses a novel design approach and new materials to achieve high performance from an ultra low profile antenna. It has been created from FR4 materials and new dielectric constant laminate substrates.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
8-Bit Pin Diode Attenuator from 2 GHz to 18 GHz

RF Variable Attenuator from G.T. Microwave, Inc.

The A6P-69T-0BD is a digitally controlled PIN diode attenuator that operates from 2 GHz to 18 GHz. It has an attenuation range of 64 dB, an insertion loss of under 4.5 dB and a VSWR under 2.1:1. This 8-Bit digital attenuator has a switching of speed less than 500 ?Sec. It is available in aconnectorized module that measures 2.0 x 2.50 x 0.75 inches.
 
Download Datasheet | Product Details
 
New Slideshow
Slideshow
Mergers & Acquisitions in the RF & Microwave Industry
2015 has been a crazy year for the RF & Microwave Industry when it comes to Mergers, Acquisitions and Spin-Offs. We have created a slideshow which covers all the M&A activity in this sector. If we are missing any, please let us know.
 
 
 
Antenna Analyzer
Pocket Size Cable Analyzer from 300 kHz to 200 MHz

Antenna Analyzer from Bird Technologies

The SK-200-TC from Bird Technologies is a pocket-sized cable analyzer that operates from 300 kHz to 200 MHz. It has a FDR (Frequency Domain reflectometry) measurement method which results in a highly reliable assessment of the health of critical components in the system and provides a “heads-up” before a failure occurs.
 
Download Datasheet | Product Details
 
RF Amplifier
Non-ITAR GaN Amplifiers from 0.1 GHz to 6 GHz

RF Amplifier from Teledyne Microwave Solutions

The TSA Family from Teledyne Microwave Solutions is a range of non-ITAR wideband GaN amplifiers that operate from 0.1 GHz to 6 GHz. These amplifiers provide an output power from 15 W to 40 W with a small signal gain of 50 dBand a VSWR under 2.3:1.They require a DC supply of 28 Vdc while drawing 5.5 A of current and are available with SMA, In & Out connectors.
 
Download Datasheet | Product Details
 
Drop-In Isolator
6 GHz to 12 GHz Drop-in Isolator

Drop-In Isolator from Renaissance Electronics Corporation

The 2H8BAG from Renaissance is a drop-in circulator that operates from 6 GHz to 12 GHz. It has an isolation up to 15 dB, an insertion loss up to 0.5 dB and a VSWR under 1.42:1. The isolator can handle up to 1 W CW of power. It measures 0.375 x 0.3 x 0.375 inch.
 
Download Datasheet | Product Details
 
Frequency Doubler
Broadband X2 Passive Frequency Multiplier from 7 GHz to 11 GHz

Frequency Doubler from Custom MMIC

The CMD226 die is a passive frequency doubler with an input frequency from 7 GHz to 11 GHz. The doubler has a 5 dB conversion loss at an output frequency of 18 GHz, with Fo and 3Fo isolations greater than 44 dBc and 46 dBc respectively. The CMD226 is matched to 50 Ohms, eliminating the need for external DC blocks and RF port matching. It can be used for point to point radios, WLL, VSAT and test and measurement applications.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.