1. everything RF
  2. RF Newsletters
more
PREV 12 Oct, 2022 NEXT

New RF and Microwave Products this Week

12 Oct, 2022 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 12 Oct, 2022
 
Sponsored by Digi-Key
 
 
New RF and Microwave Products this Week
Vector Network Analyzer
1-Port USB Vector Network Analyzer from 1 MHz to 18 GHz
Vector Network Analyzer  from Copper Mountain Technologies

The R180 from CMT is a handheld 1-Port VNA that provides lab grade performance from 1 MHz to 18 GHz. This 1-Port VNA (Cable and Antenna Analyzer) can connect directly to the DUT, as a result of which it has excellent measurement accuracy by eliminating the practical limitation of test cables. The R180 can be controlled and powered through a USB-C port or through an external 5 VDC power supply.
Download Datasheet Product Details
Waveguide Combiner / Divider
32-Way WR90 Waveguide Power Combining Assembly from 8.2 to 12.4 GHz
Waveguide Combiner / Divider  from Scientific Microwave Corporation

The WR90 from Scientific Microwave Corporation is a 32-Way Power Combining System that operates from 8.2 to 12.4 GHz. It consists of a 32-way combiner integrated with a dual broad-wall coupler that has a forward/reverse coupling of 50 dB. This combiner offers a high matching level with an insertion loss of 1 dB and is ideal for power amplifying structures and antenna feeding systems used in radars, satellite systems, and power combining networks.
Download Datasheet Product Details
RF Amplifier
RF Amplifier for Test & Measurement Applications from 26.5 to 40 GHz
RF Amplifier  from Maury Microwave

The MPA-26G5-40G-40 from Maury Microwave is an RF Amplifier System that operates from 26.5 to 40 GHz. It delivers a saturated output power of more than 40 W with a gain of higher than 43 dB. The amplifier can handle up to 0 dBm of input power and has a VSWR of less than 2:1. It allows users to independently measure power at the fundamental, harmonic and intermodulation frequencies using single-tone and two-tone input signals, as well as true ACPR using wideband modulated signals.
Download Datasheet Product Details
RF Amplifier
1 kW Pulsed Solid-State Power Amplifier from 18 to 26.5 GHz
RF Amplifier  from Exodus Advanced Communications

The AMP4065P-1KW from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 18 to 26.5 GHz. It delivers a pulsed output power of 1000 W with a power gain of more than 60 dB. This amplifier has a pulse width of up to 100 µS and a maximum duty cycle of 5%. It has spurious levels of less than -60 dBc and harmonics of -20 dBc.
Download Datasheet Product Details
RF Switch
UltraCMOS® SP4T Reflective Switch Die from 9 kHz to 67 GHz
RF Switch  from pSemi, A Murata Company

The PE42545 from pSemi is an SP4T Switch that operates from 9 kHz to 67 GHz. This switch is manufactured on pSemi’s UltraCMOS® process, a patented variation of silicon-on-insulator (SOI) technology. It has an insertion loss of 2.2 dB (@45 GHz), port-to-port isolation of 39 dB, and a switching time of 60 ns. The switch is available as a flip-chip die.
Download Datasheet Product Details
RF Switch
Hermetically-Sealed Non-Reflective SPDT Switch from DC to 14 GHz
RF Switch  from Analog Devices

The ADH347S from Analog Devices is a GaAs Non-Reflective SPDT Switch that operates from DC to 14 GHz. It can handle an input power of up to 27 dBm, has an insertion loss of less than 3.5 dB, and provides isolation of more than 38 dB. The switch is available in a hermetically-sealed ceramic surface-mount package and is ideal for point-to-point/multi-point radios, VSAT radio, fiber optics, broadband telecom, space, and military applications.
Download Datasheet Product Details
Sponsored by Digi-Key
Automotive
Automotive RF Solutions
FAKRA and AUTOMATE Mini-FAKRA connectors and cable assemblies designed for existing and next-generation automotive applications which require high-performance RF solutions with data transmission rates up to 9 GHz. Click here to learn more.
RF Connector
2x8 Ganged SMT PCB Connector Solution from DC to 50 GHz
RF Connector  from HUBER+SUHNER

The 2x8A_81_MXP-S50-0-4/111_N from Huber+Suhner is a 2x8 Ganged SMT PCB Connector solution that operates from DC to 50 GHz. It has 2 rows of 8 snap-on MXP plug connectors that are matched to 50 ohms. Each connector has a Copper Beryllium center contact, brass body, and gold finish. This connector solution can be used at frequencies up to 50 GHz, supports 500 mating cycles, and has an operating temperature range from -55°C to +85°C.
Download Datasheet Product Details
RF Connector
4.3-10 Right-Angle Plug from DC to 12 GHz
RF Connector  from MOLEX

The 731626161 from Molex is a 4.3-10 Right-Angle Plug that operates from DC to 12 GHz. It has a maximum voltage rating of 1800 V (RMS) and a durability of up to 100 mating cycles. This 50-ohm plug supports 1/2" super flex coaxial cables and is made of brass with silver plating.
Download Datasheet Product Details
Signal Generator
Pocket-Sized Signal Generator from 25 to 3000 MHz
Signal Generator  from Atlantic Microwave

The SG03-840001-S5S5 from Atlantic Microwave is a Miniature Signal Generator with a frequency range from 25 to 3000 MHz. It has a step size of 100 Hz and delivers an output power of up to +13 dBm with a phase noise of less than -112 dBc/Hz @ 100 kHz offset. This pocket-sized signal generator has spurious levels of -70 dBc, and maximum harmonics of -20 dBc.
Download Datasheet Product Details
EMF Meter / Antenna
Laser-Powered Electric Field Probe Kits from 5 kHz to 60 GHz
EMF Meter / Antenna  from AR RF/Microwave Instrumentation

The FL8000 Series from AR RF/Microwave Instrumentation are Electric Field Probe Kits that can be used from 5 kHz to 60 GHz. They have been specifically designed for EMC radiated immunity testing in the automotive, wireless, military, and aviation industry. These probe kits have separable-axis field probes, capable of measuring CW, AM, and Pulsed signals.
Download Datasheet Product Details
Signal Generator
Ultra-Low Phase Noise, CW Signal Sources from 25 MHz to 24 GHz
Signal Generator  from Roos Instruments

The RI8586 from Roos Instruments is ultra-low phase noise, continuous wave fast switching signal generator, tunable from 25 MHz to 24 GHz with 1 Hz resolution available in a single TIM (Test Instrument Module) slot. This microwave source functions as a stand-alone instrument as well as a component of RI’s System RF (SyRf) Core technology with multiple RF ports to support seamless system integration with Cassini's signal sources and Test Set TIMs.
Download Datasheet Product Details
RF Connector
IP67/IP68-Rated Waterproof RF and Microwave Connectors
RF Connector  from IntelliConnect

The Pisces Series are waterproof connectors from IntelliConnect that have been developed for use in mil-aerospace, SCADA, marine, medical, transportation, and oil and gas applications. These IP67 and IP68 rated connectors are sealed internally and are therefore waterproof when unmated. They are available in various connector formats that include: ABMS (Rugged MCX), N-Type, Push-Pull, TNC, and SMA.
Download Datasheet Product Details
Sponsored by Digi-Key
Type ABR Wireless Module
Type ABR Wireless Module
Murata's Type ABR Wi-Fi® 11b/g/n+MCU Module with an integrated PCB antenna is based from the NXP 88MW320 wireless microcontroller. This module supports Wi-Fi 802.11b/g/n up to 72.2Mbps PHY data rate with an integrated 200MHz Arm® Cortex®-M4F MCU for host-side applications. Click here to learn more.
Fixed Attenuator
10 dB Low-PIM Fixed Attenuator from 0.698 to 2.7 GHz
Fixed Attenuator  from MECA

The LPA50-10-14WWP from MECA is a Fixed Attenuator that operates from 0.698 to 2.7 GHz. This 10 dB attenuator can handle an average input power of 50 W and a peak input power of 1.5 kW. It has a passive intermodulation distortion of -161 dBc (2x20 W tones). The attenuator is available in an IP67-rated aluminum module with a 4.1/9.5 male/female connector.
Download Datasheet Product Details
RF Amplifier
Ku-Band Waveguide Low Noise SATCOM Amplifier
RF Amplifier  from AmpliTech

The APTW6-10701275-75K10-WR75-D6 from AmpliTech is a high gain, low noise SATCOM amplifier that operates from 10.7 to 12.75 GHz. It delivers an output power of 15 dBm with a gain of more than 60 dB and a noise figure of 0.88 dB. This amplifier is pressurizable to 5 psi and has inbuilt reverse voltage protection. It is ideal for SATCOM applications, such as for military and civil Satellite Downlinks.
Download Datasheet Product Details
Band Pass Filter
Coexistence BAW Filter for Wi-Fi 6E/7 Applications
Band Pass Filter  from Akoustis

The A10655 from Akoustis is a Coexistence BAW Filter that is designed for Wi-Fi 6E and Wi-Fi 7 applications. It can cover the 5 GHz U-NII-1 thru U-NII-3 bands and 6 GHz U-NII-5 thru 8 bands. This filter has a passband of 665 MHz and exhibits high-power handling capabilities necessary for the demanding requirements of Wi-Fi 6E and 7 standards.
Download Datasheet Product Details
Noise Generator
Precision SNR Noise Generators from 50 MHz to 22 GHz
Noise Generator  from Noisecom

The CNG-EbNo Series from Noisecom are fully automated instruments that can set and maintain a highly accurate ratio between a user-supplied carrier and internally generated AWGN noise, over a wide range of signal power levels and frequencies. These Precision SNR Noise Generators operate at a frequency from 50 MHz to 22 GHz.
Download Datasheet Product Details
RF Amplifier
200 W Solid State Power Amplifier from 700 to 6000 MHz
RF Amplifier  from Ophir RF

The 5295 from Ophir RF is a Linear Solid State Power Amplifier that operates from 700 to 6000 MHz. It delivers a saturated output power of 200 W with a small signal gain of 50 dB. This class A amplifier has spurious levels of -60 dBc and harmonic levels of -20 dBc. It supports CW/AM/FM/PM/pulse modulation techniques.
Download Datasheet Product Details
Front End Module
Multiband Multi-constellation Front-End Module
Front End Module  from Taoglas

The TFM.110A from Taoglas is a Multiband GNSS Front-End Module that covers L1/L2/L5 bands for high-precision applications. It consists of two fully-integrated cascaded low noise amplifiers (LNA) and pre-filters (SAW/LNA/SAW/LNA topology) in the signal path to prevent unwanted out-of-band interference from overdriving the GNSS LNAs or receiver.
Download Datasheet Product Details
Termination
40 W Low-PIM Termination from 380 MHz to 6 GHz
Termination  from RD Microwaves

The TA-A40NX from RD Microwaves is a Low-PIM Termination that operates from 380 MHz to 6 GHz. It can handle an input power of 40 W and has a PIM of -160 dBc. This 50-ohm termination is available with a NEX10 (male/female) connector.
Download Datasheet Product Details
SATCOM Antenna
SATCOM Antenna from 10.7 to 14.5 GHz for Global Inflight Broadband Services
SATCOM Antenna  from ThinKom

The ThinAir Ku3030 from ThinKom is a SATCOM Antenna that operates from 13.75 to 14.50 GHz (Tx Band) and 10.70 to 12.75 GHz (Rx Band). It is designed to be used on aircrafts to provide global inflight broadband services. The antenna can deliver a data rate of up to 400 Mbps (downlink) and 100 Mbps (uplink). It has azimuth coverage of 360° (continuous), elevation coverage of up to 90° and is interoperable among LEO and GEO constellations.
Download Datasheet Product Details
RF Amplifier
S-Band GaN Driver Amplifier from 2.7 to 3.5 GHz
RF Amplifier  from Qorvo

The QPA2935 from Qorvo is an MMIC Driver Amplifier that operates from 2.7 to 3.5 GHz. It delivers an output power of up to 2 W with a small signal gain of 28.4 dB and has a power-added efficiency of more than 52%. The amplifier is fabricated on Qorvo’s QGaN25 0.25 um GaN-on-SiC process and is matched to 50 ohms with integrated DC blocking caps on both I/O ports.
Download Datasheet Product Details
Microwave Absorber
Fire-Retardant Microwave Pyramidal Absorbers from 80 MHz to 40 GHz
Microwave Absorber  from ETS-Lindgren

The EHP-xPCL Series from ETS-Lindgren are Microwave Pyramidal Absorbers that absorb RF reflections from 80 MHz to 40 GHz. They are fabricated using urethane foam, which is cut into a precise bun configuration and impregnated with a conductive carbon using a proprietary formulation. These fire-retardant absorbers can have 1 to 256 pyramids per absorber and can handle a maximum power density of 775 W/m2.
Download Datasheet Product Details
RFID Tag IC
RAIN RFID Tag Chip for Large-Scale Global IoT Deployments
RFID Tag IC  from Impinj

The M775 from Impinj is a RAIN RFID Tag Chip that is designed for large-scale, global IoT deployments. It enables innovative solutions for consumer privacy, anti-counterfeiting, loss prevention, and embedded tagging when combined with the Impinj Authentication Service for cryptographic authentication of tagged items.
Download Datasheet Product Details
RFID Tag IC
UHF RFID Chip for Smart IoT Applications
RFID Tag IC  from NXP Semiconductors

The UCODE-9xe from NXP Semiconductors is a UHF RFID Chip for smart IoT applications. It has a read sensitivity of -24 dBm and a write sensitivity of -22 dBm. This chip has an EPC memory of 128 bits, a TID memory of 96 bits, and a 32-bit kill password. It has a Memory Safety System that protects data and ensures accuracy.
Download Datasheet Product Details
RFID Antenna
Low-Profile RFID Antenna for Home/Business/Indoor Industrial Environments
RFID Antenna  from Zebra

The AN610 from Zebra is an RFID Antenna that is designed for home/business settings or indoor industrial environments. This left-hand circularly polarized antenna operates from 865 to 868 MHz (EU)/902 to 928 MHz (US) and provides 5 dBic of gain. It has a 3 dB beamwidth of 80° in both planes, an axial ratio of less than 2 dB, and a front-to-back ratio of 18 dB.
Download Datasheet Product Details
Antenna
3-in-1 Sub-6 GHz 5G, Wi-Fi 6E, and GNSS Antenna with FAKRA Connectors
Antenna  from PCTEL

The Coach™ II (COACH2-9X1-17FT-FAKRA) from PCTEL is a 3-in-1 5G, Wi-Fi 6E, and GNSS Antenna that operates from 617 to 5950 MHz. It supports the high-speed requirements of complex RF communication systems used for Intelligent Transportation Systems (ITS) and Industrial IoT applications. For 5G operation, it consists of four 5G elements that are designed to offer compatibility with the world’s leading multi-carrier cellular routers, including Sierra XR90 and XR80 5G radios.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, articles, white papers, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]