1. everything RF
  2. RF Newsletters
more
PREV 19th Oct, 2022 NEXT

New RF and Microwave Products this Week

19th Oct, 2022 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 19th Oct, 2022
 
Sponsored by Mouser
 
 
New RF and Microwave Products this Week
RF Amplifier
Gain Block Amplifier from 45 to 95 GHz for mmWave Applications
RF Amplifier  from Mini Circuits

The ZVA-50953X+ from Mini-Circuits is a Gain Block Amplifier that operates from 45 to 95 GHz. It delivers a saturated output power of 17 dBm with a gain of more than 12.5 dB. This amplifier includes internal DC-DC conversion circuitry to maintain constant efficiency over the full input voltage range. It has several DC-protection features such as over-voltage, reverse voltage, and in-rush current to protect from damage in case of unexpected spikes in voltage during operation.
Download Datasheet Product Details
Power Divider
2-Way Multi-Octave Power Divider from 2 to 8 GHz
Power Divider  from TRM Microwave

The DMS223 from Quantic TRM is a 2-Way Multi-Octave Power Divider that operates from 2 to 8 GHz. It can handle up to 30 W of power, has an insertion loss of 0.5 dB and provides over 20 dB of isolation. The power divider has excellent phase and amplitude tracking with an amplitude balance of 0.2 dB and phase balance of 2 degrees.
Download Datasheet Product Details
DC Block
Ultra-Broadband DC Block from 160 kHz to 110 GHz
DC Block  from HYPERLABS

The HL9439 from HYPERLABS is an Inner DC Block that operates from 160 kHz to 110 GHz. It has a breakdown voltage of up to 30 V and an insertion loss of less than 2 dB. This DC block has an amplitude match of ±0.1 dB (at 110 GHz) and a phase match of ±4° (at 40 GHz). It is available in a module that measures 27.1 x 13.33 x 13.58 mm and has 1.0 mm jack/plug connectors.
Download Datasheet Product Details
Signal Generator
USB-Powered, Real-Time Vector Signal Generator from 75 MHz to 6 GHz
Signal Generator  from Aaronia AG

The V6-VSG240X from Aaronia is a Real-Time Vector Signal Generator that operates from 75 MHz to 6 GHz. It has a real-time bandwidth of 240 MHz and supports all standard signal types (CW, sweep, chirp, pulse, etc.). This signal generator is available with a number of additional software extensions that allow singnal sweeping in between 75 MHz to 6 GHz in less than 5 ms or complex IQ vector signal modulation with up to 4096QAM.
Download Datasheet Product Details
RF Spectrum Analyzer
Android-Based Handheld Spectrum Analyzer from 9 kHz to 6 GHz
RF Spectrum Analyzer  from Deviser

The E8 from Deviser is a Handheld Spectrum Analyzer that operates from 9 kHz to 6 GHz. This Android-based handheld spectrum analyzer solution is compact, light weight, and portable. It enables one-click measurement of signal parameters such as spectral composition, channel power, Adjacent Channel Leakage Ratio (ACLR), and Occupied Bandwidth (OBW).
Download Datasheet Product Details
Down Converter
24 to 44 GHz Frequency Converter Reduces CATR Test Time of Dual-Polarized Antennas
Down Converter  from ThinkRF

The D4000 Frequency Converter from thinkRF can half the Compact Antenna Test Range (CATR) test time for dual-polarized antennas. Using this Frequency Converter (24-44 GHz (RF) with an IF interface 0.01-14 GHz in the 5G NR FR2 bands) close to the DUT, prevents excessive path loss since the cable run between the test chamber and the DUT can be at a much lower frequency.
Download Datasheet Product Details
Sponsored by Mouser
Molex
SMP-MAX and SMP-MAX EVO 50 Ohm RF Connectors
Molex SMP-MAX and SMP-MAX EVO 50 ohm RF Connectors are board-to-board and board-to-filter RF connectors with a wide operating frequency range from DC to 10GHz. These subminiature connectors feature push-on and snap coupling options, with configurations in both SMT and through-hole mounting options. Click here to learn more.
Power Sensor
Real-Time Peak USB Power Sensors from 50 MHz to 40 GHz
Power Sensor  from Boonton

The RTP5000 Series of USB Power Sensors from Boonton are Real-Time peak power sensors that operate from 50 MHz to 40 GHz (available in 6 GHz, 18 GHz and 40 GHz configurations). They have a dynamic range from -60 dBm to +20 dBm with a measurement rate of 100,000 measurements per second, with no gaps in signal acquisition and zero measurement latency.
Download Datasheet Product Details
Signal Generator
Pocket-Sized Signal Generator from 25 to 3000 MHz
Signal Generator  from Atlantic Microwave

The SG03-840001-S5S5 from Atlantic Microwave is a Miniature Signal Generator with a frequency range from 25 to 3000 MHz. It has a step size of 100 Hz and delivers an output power of up to +13 dBm with a phase noise of less than -112 dBc/Hz @ 100 kHz offset. This pocket-sized signal generator has spurious levels of -70 dBc, and maximum harmonics of -20 dBc.
Download Datasheet Product Details
OCXO
Ultra Low Phase Noise OCXOs from 80 to 120 MHz
OCXO  from NEL Frequency Controls

The O-CS8 Series from NEL Frequency Controls are Oven Controlled Crystal Oscillators (OCXO) that operate from 80 to 120 MHz. They provide a sine wave output with an amplitude of +15 dBm and a SSB phase noise of -178 dBc/Hz @ 100 kHz offset. These oscillators are designed using an SC-cut crystal and have an operating temperature range from 0° to 70°C.
Download Datasheet Product Details
RF Amplifier
Low Noise Cryogenic Amplifier from 4 to 8 GHz
RF Amplifier  from AmpliTech

The APTC3-04000800-1K00-D4-V from Amplitech is a Low Noise Cryogenic Amplifier that operates from 4 to 8 GHz. It provides a gain of more than 40 dB with a noise figure of 0.35 dB and has a P1dB of -6 dBm. The amplifier requires a DC supply of 0.7 V and draws 20 mA of current (typical) while consuming 2.5 mW of power at 4°Kelvin.
Download Datasheet Product Details
Front End Module
Wi-Fi 6E Front-End Module from 5.945 to 7.125 GHz
Front End Module  from Skyworks Solutions

The SKY85788-11 from Skyworks is a Wi-Fi 6E Front-End Module that operates from 5.945 to 7.125 GHz. It is based on Skyworks’ ICE technology and has an integrated 6 GHz non-linear power amplifier (PA), high-gain low-noise amplifier (LNA) with bypass mode, and 6 GHz single-pole double-throw (SPDT) transmit/receive (T/R) switch. This module has a logarithmic power detector to provide closed-loop power control within the system and a temperature-compensated log detector.
Download Datasheet Product Details
RF Switch
Low-Current SPDT MMIC Switch from 50 MHz to 3 GHz for Battery-Powered Applications
RF Switch  from New Japan Radio

The NJG1816K75 from Nisshinbo Micro Devices is an MMIC SPDT Switch that operates from 50 MHz to 3 GHz. It has a switching speed of 100 ns, insertion loss of 0.45 dB, isolation of 30 dB, and can handle up to 30 dBm of input power. The switch has 2-bit control, requires a control voltage of 1.8 V, and consumes less than 2 µA of current making it suitable for use in battery-powered IoT devices.
Download Datasheet Product Details
Sponsored by Mouser
 
 
Antenna Measurement System
Antenna Measurement System for CTIA OTA Testing from 690 MHz to 6 GHz
Antenna Measurement System  from ETS-Lindgren

The AMS-8500 from ETS-Lindgren is an Antenna Measurement System for Over-The-Air (OTA) performance measurements. It can perform antenna testing from 690 MHz to 6 GHz with extension to frequencies up to 10 GHz via additional antennas. This system is designed to automatically measure the antenna performance of wireless devices and devices with embedded wireless functions as well as traditional antenna pattern measurements for passive antennas.
Download Datasheet Product Details
RF Shielded Test Enclosure
RF Shield Box with Testbed Assembly for Wi-Fi/Cellular Devices
RF Shielded Test Enclosure  from RF Electronics

The HDRF-1970-O from RF Electronics is an RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. This fully customizable Bench-top RF Test Setup is available with Pre-Installed Components / cables for allowing a Plug and Play Configuration. It has a thick RF absorbing foam that attenuates standing waves and reflections to provide more than 90 dB of isolation.
Download Datasheet Product Details
RF Spectrum Analyzer
USB-Powered Real-Time Spectrum Analyzer from 9 kHz to 6 GHz
RF Spectrum Analyzer  from Signal Hound

The BB60D from Signal Hound is a Spectrum Analyzer that operates from 9 kHz to 6 GHz. It streams 140 MB/sec of digitized RF signals to a PC over the USB 3.0 interface, providing an instantaneous bandwidth of 27 MHz, and sweeping at speeds of 24 GHz/sec. This analyzer performs spectrum analysis using the proprietary application programming interface (API) which can execute up to 1.2 million FFT spectrums or 320 million FFT points every second, delivering real-time spectrum data.
Download Datasheet Product Details
In Series RF Adapter
Black-Color SMA-Jack to SMA-Jack Adapter from DC to 18 GHz for Military Applications
In Series RF Adapter  from Amphenol RF

The 132170-12-BC from Amphenol RF is a Black SMA-Jack to SMA-Jack Adapter that operates at frequencies up to 18 GHz. It has black color brass plating or black zinc-cobalt plating with a gold finish. The black zinc-cobalt alloy is both RoHS and REACH-compliant and designed to be non-reflective for covert applications such as military communication equipment.
Download Datasheet Product Details
RF Cable Assembly
67 GHz Phase-Stable Cable Assemblies with Various Connector Options
RF Cable Assembly  from Maury Microwave

The Stability Plus™ from Maury Microwave are Phase-Stable Microwave/RF Cable Assemblies that operate up to 67 GHz. They have specifically been designed for phase / amplitude-stable applications and offer excellent measurement repeatability even when the cables are being flexed. These cables are lightweight, which makes them ideal for daily use with VNA's, test instruments, bench-top testing and ATE systems.
Download Datasheet Product Details
RF Cable
70 GHz Flexible Microwave Cable with a Static Bend Radius of 3 mm
RF Cable  from HUBER+SUHNER

The MULTIFLEX_53-02 (85006318) from HUBER+SUHNER is a Flexible Microwave Cable that operates at frequencies up to 70 GHz. It has a propagation velocity of 70% and a signal delay of 4.8 ns/m. This 50-ohm cable provides shielding of more than 90 dB (up to 18 GHz) and has a capacitance of 95 pF/m.
Download Datasheet Product Details
RF Up-down Converter
Up/Down Converter IC from 37 to 40 GHz for 5G Phased Array Applications
RF Up-down Converter  from Anokiwave

The AWMF-0161 from Anokiwave is an Up/Down Converter IC with an RF Frequency from 37 to 40 GHz for 5G phased array applications. It integrates Tx single-sideband up-conversion and Rx image-reject down-conversion functionality with a programmable high-side or low-side LO. This half-duplex IC has an on-chip frequency multiplier that simplifies board-level integration with external PLLs.
Download Datasheet Product Details
Cellular Module
5 Gbps Sub-6 GHz 5G NSA+SA Cellular Module for eMBB and IoT Applications
Cellular Module  from Quectel

The RM502Q-AE from Quectel is a Sub-6 GHz Cellular 5G Module that is optimized for global (except China) IoT and eMBB applications. It is based on 3GPP Release 15 technology and supports both SA and NSA 5G modes. This module delivers a 5G downlink data rate of up to 5 Gbps (NSA) and an uplink data rate of 650 Mbps (NSA).
Download Datasheet Product Details
Oscilloscope
High-Performance Oscilloscopes with 200 MHz to 1.5 GHz Bandwidth
Oscilloscope  from Rohde & Schwarz

The R&S®MXO 4 from Rohde & Schwarz are Oscilloscopes with bandwidths from 200 MHz to 1.5 GHz. They include a unique 200 Gbps processing ASIC to achieve an update rate of 4.5 million acquisitions per second (up to 5 Gsample/s). These oscilloscopes incorporate a 12-bit ADC that operates across all the instrument sample rates with an 18-bit vertical resolution architecture for greater resolution precision.
Download Datasheet Product Details
Antenna
2.4 GHz Flexible PCB Antenna for Wi-Fi, Bluetooth and Zigbee Applications
Antenna  from Antenova

The SRFW082 from Antenova is a Flexible PCB Antenna that operates from 2.4 to 2.5 GHz for Wi-Fi, Bluetooth and Zigbee applications. This linearly polarized antenna provides a peak gain of 2.8 dBi with an average efficiency of 70%. It is designed for smart battery-powered devices for the home and office, where one single device provides global coverage.
Download Datasheet Product Details
Antenna
Surface-Mount 5G/4G LTE Antenna from 617 to 6000 MHz
Antenna  from Synzen Precision Technology

The SZP-C-2L22 from Synzen Precision Technology is an ultra-slim 5G Surface-Mount Antenna that operates from 617 to 6000 MHz. This linearly polarized antenna provides a peak gain of 5.22 dBi and average efficiency of more than 40%. It covers 5G-NR, 4G LTE, 3G, and 2G bands and supports MIMO 5G systems.
Download Datasheet Product Details
GPS/GNSS Antenna
Dual-Band Embedded Chip Antenna for GPS/2.4 GHz Band Applications
GPS/GNSS Antenna  from Pulse Electronics

The ANT1003LL15R1524A from Pulse Electronics is Dual-Frequency Embedded Ceramic Chip Antenna for GPS and 2.4 GHz applications. It is designed to provide connectivity in the 2.4 GHz band and to systems operating in the GPS, BeiDou, and GLONASS bands. This linearly polarized antenna provides a gain of more than 6.5 dBi and has an efficiency of 81%.
Download Datasheet Product Details
Antenna
Multiband Dome Antenna from 617 to 6000 MHz for 4G/5G Applications
Antenna  from Ventev

The VM-UW4OD-SM from Ventev is a 4-in-1 Multiband Dome Antenna that operates from 617 – 960 MHz/1690 – 2700 MHz/3300 – 4200 MHz and 4900 – 6000 MHz. This vertically polarized antenna provides 8 dBi of gain and more than 10 dB of isolation. It has an omnidirectional radiation pattern and the antenna supports 4x4 MIMO/diversity at 4G/5G.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]