1. everything RF
  2. RF Newsletters
more
PREV 26 Oct, 2022 NEXT

New RF and Microwave Products this Week

26 Oct, 2022 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 26 Oct, 2022
 
Sponsored by EMC Directory
 
 
New RF and Microwave Products this Week
RF Spectrum Analyzer
Spectrum Analyzers from 9 kHz to 13.6 / 26.5 GHz
RF Spectrum Analyzer  from SIGLENT

The SSA5000A Series from Siglent are Spectrum Analyzers that operate from 9 kHz to 13.6 / 26.5 GHz. They have an analysis bandwidth of 25/40 MHz, a dynamic range of 60 dB, and a sweep time from 1 µs to 6000 sec. These spectrum analyzers can also operate as real-time analyzers to provide multi-dimensional data displays and advanced triggering to solve modern RF spectrum challenges like channel power measurement, hopping frequency, conflict channel & spectrum interference.
Download Datasheet Product Details
Frequency Synthesizer
YIG Based Multi-Channel RF Signal Synthesizers from 10 MHz to 40 GHz
Frequency Synthesizer  from Holzworth Instrumentation

The HSY Series from Holzworth are YIG-based RF Signal Synthesizers that operate from 10 MHz to 3/6/12/24/40 GHz. They are available in 1, 2, 3 or 4 channel options, with each channel having an accurate dynamic range from -110 to +20 dBm. The synthesizers have a frequency step size of 0.001 Hz, a phase offset resolution of 0.1º, and a switching speed of less than 10 ms.
Download Datasheet Product Details
Gain Equalizer
0.5 W Passive Amplitude Equalizer from 26 to 40 GHz
Gain Equalizer  from Quantic PMI (Planar Monolithics)

The EQL-26G40G-+7DB-292FF from Quantic PMI is a Passive Amplitude Equalizer that operates from 26 to 40 GHz. It can handle a CW input power of up to 0.5 W and has an insertion loss of less than 4.75 dB. This amplitude equalizer has a slope of +0.5 dB/GHz and an amplitude accuracy of ±0.5 dB. It is available in a module that measures 1.10 x 0.67 x 0.22 inches with 2.92 mm (female) connectors.
Download Datasheet Product Details
RF Amplifier
Surface-Mount Digital Variable Gain Amplifier from 50 to 6000 MHz
RF Amplifier  from BeRex, Inc.

The BVA2761 from Berex is a Digital Variable Gain Amplifier (DVGA) that operates from 50 to 6000 MHz. It integrates a high-performance 7-bit digital step attenuator (DSA) and two high linearity, broadband gain block amplifiers. The gain block amplifiers provide a gain of 34.8 dB with a noise figure of 1.5 dB (at 3500 MHz) and the DSA provides an attenuation range of 31.75 dB in 0.25 steps.
Download Datasheet Product Details
Software
Radar Simulation Software
Software  from Remcom

WaveFarer® is a high fidelity radar simulator that accounts for multipath and scattering from structures and vehicles in the immediate environment of a radar system as well as key atmospheric and scattering effects for frequencies up to and beyond 100 GHz. Applications include simulation of automotive drive scenarios, indoor sensors, and far-field radar cross-section (RCS).
Download Datasheet Product Details
Waveguide Attenuator
Double Waveguide Attenuator Assembly from 17.3 to 20.7 GHz
Waveguide Attenuator  from Scientific Microwave Corporation

The WR51 from Scientific Microwave Corporation is a Double Attenuator Assembly that operates from 17.3 to 20.7 GHz. It consists of an end-launch adapter integrated with a double attenuator that is used for monitoring RF power. The assembly provides deep matching and flat attenuation with high power handling over the whole operating frequency band. Other waveguide frequency bands are available on request.
Download Datasheet Product Details
Featured Article
drive testing
Top Eight Frequently Asked Questions about RF Drive Testing
Drive testing is the process of collecting samples of RF signals while driving in a certain geographical area. As you're driving and collecting these samples, the samples are geo-tagged or geo-located, so each sample is associated with a specific location. Click here to read this article from thinkRF.
RF Amplifier
15 W CW/Pulsed Solid-State Power Amplifier from 2 to 10 GHz
RF Amplifier  from Exodus Advanced Communications

The AMP2073-3 from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 2 to 10 GHz. It delivers a CW/Pulsed saturated output power of 15 W with a power gain of more than 40 dB. This Class A/AB power amplifier has spurious levels of less than -60 dBc and harmonics of -20 dBc. It is ideal for EMI/RFI, lab, CW/Pulse, and all communication applications.
Download Datasheet Product Details
Horn Antenna
Quad Ridged Horn Antenna from 730 MHz to 11 GHz
Horn Antenna  from RF SPIN

The QRH11 from RFSpin is a Quad Ridged Horn Antenna that operates from 730 MHz to 11 GHz. This dual linear, circular (with hybrid) polarized antenna provides a stable gain across the entire band and has a VSWR of less than 2.4:1. It has an integrated spirit level for accurate alignment. Calibration data for the antenna is available in .xls format.
Download Datasheet Product Details
RF Variable Attenuator
Solid State USB Programmable Attenuator from 30 to 3000 MHz
RF Variable Attenuator  from JFW Industries

The 50P-2042 from JFW Industries is a solid state programmable attenuator that operates from 30 MHz to 3 GHz. It has an attenuation range from 0 to 63.5 dB with 0.5 dB steps. The attenuator has a fast switching speed of 1 micro second and can handle an input power of up to 20 dBm. It is available in a module with SMA female connectors and a USB port for power/control.
Download Datasheet Product Details
RF Tapper
Low PIM Tapper from 0.698 to 2.7 GHz
RF Tapper  from MECA

The LPU2N-10-1.700VWWP from MECA is a Low PIM Tapper that operates from 0.698 to 2.7 GHz. It can handle an average power of up to 300 W and a peak power of 1kW. This 50-ohm tapper has a split ratio of 10±1.2 dB (10:1) and passive intermodulation of less than -152 dBc. It is available with N-type female connectors.
Download Datasheet Product Details
RF Amplifier
Positive Gain-Slope MMIC Amplifier from 1.4 to 7.1 GHz
RF Amplifier  from CML Microcircuits

The CMX90G301 from CML Microcircuits is a Positive Gain-Slope Amplifier that operates from 1.4 to 7.1 GHz. It provides a P1 dB of 11.5 dBm @3.5 GHz with a small signal gain of 14.5-15.5 dB. This cascadable MMIC amplifier utilizes GaAs pHEMT process to provide a combination of low DC power, low noise, and high gain.
Download Datasheet Product Details
Signal Generator
USB-Powered Portable Dual-Channel Frequency Generator from 25 MHz to 6 GHz
Signal Generator  from DS Instruments

The SG6000X from DS Instruments is a Dual-Channel RF Signal Generator that operates from 25 MHz to 6 GHz. It enables users to generate two separate high-quality RF signals with adjustable output powers (independent step & variable control options). This fully synthesized fractional-N synthesis generator has a phase noise of -74 dBc/Hz at a 10 kHz offset.
Download Datasheet Product Details
Trending Category: GNSS Anti-Jamming Solutions
GNSS Anti-Jamming Solutions
New Category: GNSS Anti-Jamming Solutions
everything RF has listed GNSS Anti-Jamming Solutions from the leading manufacturers. Find GNSS Anti-jamming systems and antennas based on your requirement. View product specifications, download datasheets and get quotes on the products that you want. Click here to learn more.
RF Inductor
AEC-Q200 Grade Injection Chokes for Power over Coax Applications
RF Inductor  from Coilcraft

The 1205PoC Series from Coilcraft are Injection Chokes that are optimized for AEC-Q200 power over coax (PoC) applications. They have a Ferrite core and maintain high impedance (= 1 kOhm) over a wide band frequency range to isolate AC signal from the DC power. These chokes are available in compact surface-mount packages that measure 3.20 x 1.40 x 2.36 mm to reduce board area of overall system solutions.
Download Datasheet Product Details
RF Module
2.4 GHz LoRa and LoRaWAN Transceiver Module
RF Module  from Miromico

The FMLR-80-STL4E from Miromico is a 2.4 GHz LoRa® and LoRaWAN® IoT Transceiver Module that is designed to enable wireless connectivity of devices, systems, and sensors communicating with high data rates or over long distances. It delivers a data rate of up to 1.3 Mbps and supports long-range Time-of-Flight (ToF ranging) distance measurements.
Download Datasheet Product Details
Cellular Module
Sub-6 GHz 5G-NR Module with C-V2X Support for Automotive Applications
Cellular Module  from SIMCom

The SIM8800E from SimCom is a Sub-6 GHz Multi-Band 5G-NR Module with optional C-V2X functionality. This automotive-grade module supports 3GPP R15 5G NSA/SA with a data transfer rate of up to 900 Mbps (uplink) and 2.4 Gbps (downlink). It is designed for automotive applications with IATF 16949 requirement and provides a unique combination of performance, security and flexibility for automotive applications.
Download Datasheet Product Details
Tunable Filter
Analog-Tunable Notch Filter Bank from 6.0 to 18.0 GHz
Tunable Filter  from Atlanta Micro

The AM3170 from Mercury is a Tunable Notch Filter Bank that operates from 6.0 to 18.0 GHz. It has six notch filters integrated with an SP6T switch at the input and output and has a band switching speed of 1 µs. This analog filter bank has an insertion loss of less than 7 dB and a notch depth of 40 dB.
Download Datasheet Product Details
RF Amplifier
500 W, Space-Qualified GaN SSPA from 9.35 to 9.85 GHz
RF Amplifier  from Aethercomm

The SSPA 9.35-9.85-500 from Aethercomm is a Solid-State Power Amplifier (SSPA) that operates from 9.35 to 9.85 GHz. It delivers a peak output power of 500 W (57 dBm) with a small signal of 50 dB and composite power-added efficiency from 20 to 25%. This SSPA has a duty cycle of up to 50%, a maximum pulse width of 500 µs and can be turned ON and OFF in less than 2.0 µs.
Download Datasheet Product Details
Termination
Aluminium Nitride Flangeless Termination from DC to 2.7 GHz
Termination  from TTM Technologies

The E150N50X4 from TTM Technologies is an Aluminium Nitride Flangeless Termination that operates from DC to 2.7 GHz. It can handle an input power of 150 W and has a return loss of over 20 dB. This 50-ohm Aluminium Nitride based termination is a cost-competitive alternative to Beryllium Oxide (BeO). It is available in a package that measures 0.375 x 0.250 x 0.072 inches.
Download Datasheet Product Details
90 Degree Hybrid Coupler
90° Surface-Mount Hybrid Coupler from 0.7 to 4.2 GHz
90 Degree Hybrid Coupler  from Innovative Power Products

The IPP-7124 from Innovative Power Products is a 90° Hybrid Coupler that operates from 700 to 4200 MHz. It can handle a CW input power of up to 150 W, provides more than 13 dB of isolation and has an insertion loss of 0.65 dB. This coupler has an amplitude balance of ±0.85 dB and a phase balance of ±5°.
Download Datasheet Product Details
Directional Coupler
30 dB Directional Coupler from 2 to 40 GHz
Directional Coupler  from KRYTAR

The 102040030 from KRYTAR is a Directional Coupler that operates from 2 to 40 GHz. This 30 dB coupler has a directivity of more than 11 dB and an insertion loss of less than 1.5 dB. It can handle an average input power of 20 W and a peak input power of 3 kW. The coupler is available in a module that measures 1.75 x 0.40 x 0.65 inches with 2.4 mm (female) connectors.
Download Datasheet Product Details
Antenna
Sub-6 GHz Wi-Fi 6/6E Stamped Metal Antenna for Automotive Applications
Antenna  from KYOCERA AVX

The A1000146 from KYOCERA AVX is a Stamped Metal Antenna that operates from 2400-2485 MHz/5150-5850 MHz/5925-7125 MHz. This linearly polarized antenna provides a peak gain of 4.1 dBi and an efficiency of up to 81%. It is available in a surface-mount package that measures 17.85 x 6.90 x 4.30 and is suitable for automotive applications for Wi-Fi 6/6E, Bluetooth, BLE, and Zigbee.
Download Datasheet Product Details
Beamforming IC
4-Channel Dual-Polarized Analog Beamforming IC from 24.25 to 27.50 GHz
Beamforming IC  from NXP Semiconductors

The MMW9014K from NXP Semiconductor is a Dual-Polarized Analog Beamforming IC that operates from 24.25 to 27.50 GHz. It has 4 channels with each channel consisting of a transmit chain (Tx) and a receive chain (Rx). Both Tx and Rx chains have a buffer, a phase shifter, and a variable gain amplifier (VGA) with an 8-bit phase and gain resolution.
Download Datasheet Product Details
RF Amplifier
GaAs/GaN Hybrid DOCSIS 4.0 Power Doubler Amplifier from 45 to 1795 MHz
RF Amplifier  from Qorvo

The QPA3315 from Qorvo is a Hybrid Power Doubler Amplifier that operates from 45 MHz to 1795 MHz. It provides a gain of 23 dB with excellent linearity, low noise, and optimal reliability. This amplifier is manufactured using GaAs and GaN dies, requires a DC supply from 24 to 34 V, and consumes less than 530 mA of current.
Download Datasheet Product Details
Noise Figure Analyzer
High-Accuracy Low-Frequency Noise Analyzer from 30 MHz to 100 MHz
Noise Figure Analyzer  from Keysight Technologies

The E4727B from Keysight is a Low-Frequency Noise Analyzer with a frequency bandwidth from 30 MHz to 100 MHz. It uses a specially designed LNA for extremely low device noise measurement such as transistor linear region noise and also allows noise measurement at very low bias currents along with measurement of high-power device noise in high current environments up to 1 A.
Download Datasheet Product Details
Near Field Probe
Electric Field Probe from 10 MHz to 40 GHz for Military/Automotive Specifications
Near Field Probe  from ETS-Lindgren

The EMSense™ 40 from ETS-Lindgren is an Electric Field Probe that operates from 10 MHz to 40 GHz. It has a dynamic range from 1 to 1000 V/m, a resolution of 0.1 V/m (from 100 to 1000 V/m), and can read data continuously over the entire dynamic range. This probe has a three-axis dipole design with a maximum measurement speed of 100 measurements/second (X, Y, Z & ETot).
Download Datasheet Product Details
Antenna
All Weather Log Periodic Antenna from 617 to 2700 MHz
Antenna  from Pasternack Enterprises Inc

The PEANLP1003 from Pasternack is a Log-Periodic Antenna that operates from 617 – 960 MHz and 1.71 – 2.7 GHz. This vertically polarized antenna provides a gain of 10 dBi and has a VSWR of less than 2:1. It has a vertical HPBW of 50° and a horizontal HPBW of up to 75°. The antenna includes heavy-duty steel mast mounting brackets and a lightweight ABS radome for all-weather operation.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]