1. everything RF
  2. RF Newsletters
more
PREV 9 Nov, 2022 NEXT

New RF and Microwave Products this Week

9 Nov, 2022 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 9 Nov, 2022
 
Sponsored by SV Microwave
 
 
New RF and Microwave Products this Week
RF Amplifier
32 Watts GaN Power Amplifier Module from 300 to 6000 MHz
RF Amplifier  from Triad RF Systems

The TA1216 from Triad RF Systems is a GaN Power Amplifier Module that operates from 300 to 6000 MHz. This class AB amplifier delivers an output power of 32 watts with a gain of 45 dB. It operates over a DC supply voltage from 12 to 28 V and draws 4 A of current. This amplifier supports most signal types and modulation formats including but not limited to 3-4G telecom, WLAN, OFDM, DVB, and CW / AM / FM.
Download Datasheet Product Details
Antenna Measurement System
Antenna Measurement System from 650 MHz to 50 GHz for 5G Test Applications
Antenna Measurement System  from Microwave Vision Group

The StarLab 50 GHz from MVG World is an Antenna Measurement System for 5G test applications that provides frequency measurements from 650 MHz to 50 GHz. Its spherical near-field measurement capabilities provide flexibility in types of antennas that can be tested, from low to high directivity. The system integrates cutting-edge technology for the measurement and analysis of mm-Wave frequencies and provides fast and accurate test results for a variety of 5G devices.
Download Datasheet Product Details
Frequency Synthesizer
Fractional-N PLL Frequency Synthesizers from 1 to 32 GHz
Frequency Synthesizer  from Luff Research

The SLSM Models from Luff Research are Single Phase-Locked Loop (PLL) Frequency Synthesizers that generate output signals from 1 to 32 GHz. They use an external 10 MHz reference, have spurious levels of -60 dBc and harmonics of -20 dBc. These synthesizers include the PLL IC, amplifiers, local oscillators with TCXO, integrator, and a power divider.
Download Datasheet Product Details
Antenna
Sub-6 GHz, High-Gain Parabolic Antenna for Wi-Fi and Cellular Bands
Antenna  from Bolton Technical

The BT974822 from Bolton Technical is a Parabolic Antenna that operates from 600-960 MHz, 1700-2200 MHz, and 3000-6500 MHz. This dual-polarized (H or V) antenna provides up to 28 dBi of gain and has a VSWR of less than 2.5:1. It has a horizontal beam width of up to 23°, a vertical beamwidth of up to 35° and a front-to-back ratio of 20 dB.
Download Datasheet Product Details
RF Amplifier
Surface-Mount Low Noise Amplifier from 20 to 55 GHz
RF Amplifier  from MACOM

The MAAL-011186 from MACOM is a Low Noise Amplifier (LNA) that operates from 20 to 55 GHz. It delivers a saturated output power of 17 dBm with a small signal gain of more than 15 dB and a noise figure of less than 6 dB. This LNA is fabricated using a GaAs pHEMT process which features full passivation for enhanced reliability. It can be used as a low-noise amplifier or driver in higher-power applications.
Download Datasheet Product Details
Front End Module
Dual Channel Switch-LNA FEM from 2.3 to 5 GHz for 5G TDD Base Stations
Front End Module  from Qorvo

The QPB9380 from Qorvo is a Dual Channel Switch-LNA Front End Module that operates from 2.3 to 5 GHz. It has been developed for 5G TDD base stations. The FEM integrates a two-stage LNA and switches in a dual-channel configuration (the second stage LNA has an integrated bypass mode). In Rx mode, it has a noise figure of 1 dB and an insertion loss of 0.5 dB.
Download Datasheet Product Details
Sponsored by SV Microwave
SV Microwave
High Speed Edge Launch PCB Connectors
Amphenol SV Microwave offers a complete line of extreme frequency (DC - 100 GHz) coaxial / RF edge launch PCB connectors that meet the need for high performing, highly reliable precision connectors. Available in SMA, SMP, SMPS and SMPM variations. In stock through distribution! Click here to learn more.
RF Spectrum Analyzer
Real-Time Spectrum Analyzer from 100 kHz to 43.5 GHz
RF Spectrum Analyzer  from Signal Hound

The SM435B from Signal Hound is a real-time spectrum analyzer and monitoring receiver that operates from 100 kHz to 43.5 GHz. It has 160 MHz of instantaneous bandwidth, a dynamic range of 110 dB, 1 THz/sec sweep speed at 30 kHz RWB (using Nutwall windowing), and ultra low phase noise. The low levels of phase noise rival some of the more expensive spectrum analyzers on the market.
Download Datasheet Product Details
RF Spectrum Analyzer
Military-Grade Real-Time Spectrum Analyzer from 10 MHz to 6 GHz
RF Spectrum Analyzer  from Aaronia AG

The SPECTRAN V6 XFR PRO from Aaronia is a Military Certified Real-Time Spectrum Analyzer that operates from 10 MHz to 6 GHz (8 GHz option also available). It provides up to 245 MHz (I/Q) of real-time bandwidth and can sweep the complete band in less than 5 ms (1 THz/s). The analyzer is designed for frequency monitoring and for detecting, analyzing, and recording unknown and illegal signal transmissions.
Download Datasheet Product Details
Down Converter
24 to 44 GHz Frequency Converter Reduces CATR Test Time for Dual-Polarized Antennas
Down Converter  from ThinkRF

The D4000 Frequency Converter from thinkRF can half the Compact Antenna Test Range (CATR) test time for dual-polarized antennas. Using this Frequency Converter (24-44 GHz (RF) with an IF interface 0.01-14 GHz in the 5G-NR FR2 bands) close to the DUT, prevents excessive path loss since the cable run between the test chamber and the DUT can be at a much lower frequency.
Download Datasheet Product Details
Vector Network Analyzer
2-Port Compact USB VNA from 300 kHz to 1.3 GHz
Vector Network Analyzer  from Copper Mountain Technologies

The TR1300/1 from Copper Mountain Technologies is a 2-Port lab-grade vector network analyzer that operates from 300 kHz to 1.3 GHz. This compact computer-controlled VNA has a dynamic range of 130 dB and can measure up to 100,001 measurement points. It includes an RF measurement module and TR software application which runs on Windows or Linux operating system on a PC, laptop, tablet, or x86 board computer connecting to the measurement hardware via USB interface.
Download Datasheet Product Details
Signal Generator
High-Performance Signal Generator from 100 MHz to 18 GHz
Signal Generator  from Boonton

The SGX1018 from Boonton is a Signal Generator that operates from 100 MHz to 18 GHz. It delivers an output power from -20 to +18 dBm with a phase noise of -106 dBc/Hz and has a frequency switching speed of 200 µs. The generator is based on a unique non-PLL (phase-locked loop) design with a digital front-end and direct, proprietary back end to provide ultra-fine frequency resolution, lightning-fast frequency switching, ultra-low phase noise and jitter, and superior reliability.
Download Datasheet Product Details
RF Inductor
Low Profile Wire-wound Ferrite Chip Inductors from 20 to 560 nH
RF Inductor  from Coilcraft

The 0402FL Series from Coilcraft are Wire-wound Ferrite Chip Inductors with inductance values from 20 to 560 nH. These chip inductors have a low profile of 0.55 mm, that is about 10% lower than competitive inductors. They were developed for cellular applications for use either as filter elements, as one-pole filters, or as RF chokes in the cellular bands, and can also be used in mobile and infrastructure equipment.
Download Datasheet Product Details
Sponsored by SV Microwave
 
 
RF Amplifier
700 W Solid-State Power Amplifier from 1 to 4 GHz
RF Amplifier  from Exodus Advanced Communications

The AMP2090B-1LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 1 to 4 GHz. It delivers a saturated output power of more than 700 W with a gain of 59 dB. This amplifier has a Class A/AB linear design and built-in protection circuits. It supports forward/reflected power monitoring in both dBm & Watts, VSWR, voltage/current, and temperature sensing.
Download Datasheet Product Details
RF Amplifier
1 kW Solid-State Pulsed Power Amplifier from 2 to 4 GHz
RF Amplifier  from AR RF/Microwave Instrumentation

The 1000SP2G4 from AR RF/Microwave Instrumentation is a Solid-State Pulsed Power Amplifier that operates from 2 to 4 GHz. It delivers a pulsed saturated output power of 1 kW with a small signal gain of more than 60 dB. This Class-B amplifier is suitable for pulsed applications at low-duty factors where instantaneous bandwidth and high gain are required and includes features such as gain control and output level protection.
Download Datasheet Product Details
RF Shielded Test Enclosure
RF Shielded Test Box from 20 MHz to 6 GHz
RF Shielded Test Enclosure  from RF Electronics

The HDRF-3049 from RF Electronics is an RF Shielded Test Box that operates from 20 MHz to 6 GHz. It has thick RF-absorbing foam that deadens standing waves and reflections to provide more than 90 dB of isolation. The test box has shielded power filters for powering devices placed inside the box while blocking all wireless signals.
Download Datasheet Product Details
Cellular Module
410/450 MHz 3GPP Release-14 LTE Cat M1/NB2 Module for Indoor IoT Applications
Cellular Module  from Telit Communications

The ME310G1-W2 from Telit Communications is an LTE Cat M1/NB2 Module that operates in the 410 and 450 MHz bands. It delivers an uplink data rate of up to 1 Mbps and a downlink data rate of up to 588 Kbps. This 3GPP Rel. 14 compliant module enables increased power savings for IoT applications using Power Saving Mode (PSM) and extended Discontinuous Reception (eDRX).
Download Datasheet Product Details
Cellular Module
4G/LTE Cat-20 Module with 3G Fallback for Global Applications
Cellular Module  from Sierra Wireless

The EM7690 from Sierra Wireless is a 4G LTE Cat-20 Module with a 3G fallback for global applications. It is 3GPP Rel-15 compliant, and delivers a peak download data rate of 2 Gbps and a peak upload data rate of 211 Mbps. This module has an integrated GNSS receiver that supports Galileo, GLONASS, GPS, and Beidou bands.
Download Datasheet Product Details
RF Transistor
25 W Surface-Mount LDMOS FET from 500 to 1400 MHz
RF Transistor  from Wolfspeed

The PTVA120252MT from Wolfspeed is an LDMOS FET that operates from 500 to 1400 MHz. It delivers an output power of 25 W (P1dB) with a power gain of 19.8 dB and has a drain efficiency of 64%. This transistor is manufactured on Wolfspeed's advanced LDMOS process, which provides excellent thermal performance, and superior reliability and has integrated ESD protection.
Download Datasheet Product Details
RF Transistor
13.8 W Doherty GaN Power Transistor from 2.3 to 2.4 GHz for 5G Base Stations
RF Transistor  from NXP Semiconductors

The A5G23H110N from NXP Semiconductors is an Airfast® Doherty RF Power Transistor that operates from 2300 to 2400 MHz. It delivers an output power of 13.8 W with a power gain of 16 dB and has an efficiency of 56.5%. The transistor is based on GaN technology and is designed for low-complexity analog or digital linearization systems and is optimized for massive MIMO active antenna systems for 5G base stations.
Download Datasheet Product Details
RF Amplifier
High-Linearity InGaP HBT Power Amplifier from 3.3 to 4.2 GHz
RF Amplifier  from Guerrilla RF

The GRF5536 from Guerrilla RF is a Two-Stage InGaP HBT Power Amplifier that operates from 3.3 to 4.2 GHz. It delivers a linear output power of +23 dBm (up to 85°C) with a gain of 27 dB. This amplifier is designed to deliver excellent P1dB, ACLR, and IM3 performance and has exceptional native linearity for transmitter applications that do not employ digital pre-distortion correction schemes.
Download Datasheet Product Details
RF Connector
1x8 Ganged SMT PCB Connector from DC to 50 GHz
RF Connector  from HUBER+SUHNER

The 1x8A_81_MXP-S50-0-3/111_N from HUBER+SUHNER is a 1x8 Ganged SMT PCB Connector that operates from DC to 50 GHz. It has a Copper Beryllium center contact and a brass body. This 50-ohm connector has an MXP interface, which can withstand 500 mating cycles and has an operating temperature range from -55°C to +85°C.
Download Datasheet Product Details
Directional Coupler
30 dB Directional Coupler from 0.5 to 18 GHz
Directional Coupler  from Pulsar Microwave

The CS30-23-436/20 from Pulsar Microwave Corporation is a Directional Coupler that operates from 0.5 to 18 GHz. This 30 dB coupler has a directivity of more than 15 dB and an insertion loss of less than 0.9 dB. It can handle an input/reflected power of up to 25 W and has a VSWR of less than 1.5:1. The coupler is available in a module that measures 4.4 x 0.7 x 0.4 inches and has SMA connectors.
Download Datasheet Product Details
Waveguide Attenuator
Voltage Variable Waveguide Attenuator from 26.5 to 40 GHz
Waveguide Attenuator  from Pasternack Enterprises Inc

The PEWGA3210 from Pasternack is a Voltage Variable Waveguide Attenuator that operates from 26.5 to 40 GHz. It has an attenuation range from 0 to 30 dB and requires a DC control voltage from 0 to 5 V to adjust the attenuation. This attenuator can handle a CW input power of up to +23 dBm and has an insertion loss of 0.8 dB.
Download Datasheet Product Details
RF Switch
mm-Wave SPDT Switch from 37 to 49 GHz for 5G Applications
RF Switch  from Analog Devices

The ADRF5301 from Analog Devices is a Silicon-Based SPDT Switch that operates from 37 to 49 GHz. It can handle an input power of up to 28 dBm, has an insertion loss of 1.4 dB, and provides 30 dB of isolation. This switch exhibits high input linearity and is manufactured using a silicon process. It integrates a driver to perform logic functions internally and to provide users with the advantage of simplified CMOS/TTL control interfaces.
Download Datasheet Product Details
Antenna
2.4 GHz Stamped Metal Antenna for ISM/Wi-Fi/Bluetooth Applications
Antenna  from Linx Technologies

The ANT-2.4-MSA-TH1 from Linx Technologies is a Stamped Metal Antenna for 2.4 GHz ISM, Wi-Fi, Bluetooth, and ZigBee applications. It provides a peak gain of 3.7 dBi with an efficiency of 87% and has a VSWR of less than 1.3:1. This antenna has an omnidirectional radiation pattern. It is available and measures 16.7 mm x 5.8 mm x 5.4 mm and can be directly mounted on a PCB with the help of through-hold solder.
Product Details
TCXO
TCXOs from 10 to 40 MHz for GPS, Wi-Fi, and Radio Applications
TCXO  from Pletronics

The UCG4 Series from Pletronics are TCXOs with frequencies from 10 to 40 MHz. They have an optional voltage control function with a voltage control range of 0.30-2.50 V. These TCXOs provide a clipped sine wave output with a phase noise of less than -145 dBc/Hz and a start-up time of less than 10 ms. They require a DC supply from 1.8 to 3.3 V and consume less than 3 mA of current.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]