1. everything RF
  2. RF Newsletters
more
PREV 14 Dec, 2022 NEXT

New RF and Microwave Products this Week

14 Dec, 2022 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 14 Dec, 2022
 
Sponsored by Digi-Key
 
 
New RF and Microwave Products this Week
Tunable Filter
Digitally Tunable Band Reject Filter with a Stopband from 600 to 8000 MHz
Tunable Filter  from Ranatec

The RI 268 from Ranatec is a Digitally Tunable Band Reject Filter with a stopband tunable from 600 to 8000 MHz. It has been designed to combine both 5 and 160 MHz reject bandwidths and is fully equipped to conform to all existing sub-6 GHz mobile bands and all sub-7.125 GHz Wi-Fi channels. This filter has an ingenious microwave design, uses digital signal processing, and state-of-the-art components to provide optimal stopband rejection.
Download Datasheet Product Details
Frequency Synthesizer
YIG Based Multi-Channel RF Signal Synthesizers from 10 MHz to 40 GHz
Frequency Synthesizer  from Holzworth Instrumentation

The HSY Series from Holzworth are YIG-based RF Signal Synthesizers that operate from 10 MHz to 3/6/12/24/40 GHz. They are available in 1, 2, 3 or 4 channel options, with each channel having an accurate dynamic range from -110 to +20 dBm. The synthesizers have a frequency step size of 0.001 Hz, a phase offset resolution of 0.1º, and a switching speed of less than 10 ms.
Download Datasheet Product Details
GPS/GNSS Disciplined Oscillator
10 MHz GPS/GNSS-Disciplined Rubidium Oscillator
GPS/GNSS Disciplined Oscillator  from Orolia

The Spectratime SRO-100 from Orolia is a GPS/GNSS-Disciplined Rubidium Oscillator with an output frequency of 10 MHz. It provides a sine-wave output with a phase noise of -145 dBc/Hz @1 kHz offset and has a frequency accuracy of 5 x 10-11. This oscillator requires a DC supply of 24 V and consumes less than 1.2 A of current in warm-up mode. It is ideal for telecom, navigation, broadcast, defense, and instrumentation applications.
Download Datasheet Product Details
OCXO
High-Stability OCXO Series from 10 to 120 MHz
OCXO  from Bliley Technologies

The BOVXE Series from Bliley Technologies are Oven Controlled Oscillators (OCXO) that operate from 10 to 120 MHz. They provide a Sine/CMOS output with a phase noise of -155 dBc/Hz @10 kHz offset (10 MHz freq.) and have frequency stability options of ±20, ±50, ±100 ppb. These oscillators have a maximum warm-up time of 3 minutes, a rise/fall time of less than 5 ns, and a duty cycle of 50%.
Download Datasheet Product Details
RF Inductor
Ferrite Chip Wirewound Inductors from 15 nH to 10 µH
RF Inductor  from Coilcraft

The 0603AF Series from Coilcraft are Wirewound Inductors with ferrite core construction and heavy gauge wire for high current handling and broadband filtering. They are available in values from 15 nH to 10 uH with tight ±5% standard tolerance. They have high impedance values and a self-resonant frequency of 40-3500 MHz. These inductors are available in a package that measures 1.80 x 1.12 x 0.91 mm.
Download Datasheet Product Details
Waveguide to Coax Adapter
Right-Angle Waveguide-to-Coaxial Adapters from 1 to 110 GHz
Waveguide to Coax Adapter  from Scientific Microwave Corporation

The SMC 137 Series from Scientific Microwave Corporation are Right-angle Waveguide-to-Coaxial Adapters from 1 to 110 GHz. They are available with 1 mm / 1.85 mm / 2.4 mm / K-type / SMA & N-type coaxial interfaces on one end and various waveguide interface options on the other end. These adapters support full band operation, have deep matching levels and a high-power handling capability.
Download Datasheet Product Details
Sponsored by Digi-Key
Power Line Filters
EMI Power Line Filters
Qualtek's Primary Power Components Division provides a complete line of EMI filters. Our line of products are designed and approved to most international safety agency requirements. A full range of products are maintained in inventory for quick on-time deliveries. Click here to learn more.
Fixed Attenuator
6 dB Low PIM Fixed Attenuator from 0.698 to 2.7 GHz
Fixed Attenuator  from MECA

The LPA50-6-17WWP from MECA is a Fixed Attenuator that operates from 0.698 to 2.7 GHz. It provides an attenuation of 6 dB and can handle an average input power of 50 W with a peak power of 1.5 kW. The attenuator has a passive intermodulation (PIM) of -153 dB and supports reverse power of 5 W. It is available in an IP67-rated weatherproof module that measures 1.109 x 4.6 x 1.99 inches and has 4.3/10-type female connectors.
Download Datasheet Product Details
RF Connector
IP67/IP68-Rated Waterproof RF and Microwave Connectors
RF Connector  from IntelliConnect

The Pisces Series are waterproof connectors from IntelliConnect that have been developed for use in mil-aerospace, SCADA, marine, medical, transportation, and oil and gas applications. These IP67 and IP68 rated connectors are sealed internally and are therefore also waterproof when unmated. They are available in various connector formats that include: ABMS (Rugged MCX), N-Type, Push-Pull, TNC, and SMA.
Download Datasheet Product Details
PXI Data Storage Module
PXIe SSD Data Storage Module for Spectrum Recording, Electronic Warfare, and Software Defined Radios
PXI Data Storage Module  from RADX Technologies

The Trifecta-SSD-RM from RADX Technologies is a COTS M.2 NVMe SSD Data Storage Module for PXIe and 3U CPCIe Systems. These SSD storage solutions have been developed for modular Test & Measurement, Software Defined Radio, and Electronic Warfare (EW) markets. It features removable M.2 NVMe SSD data cartridges with 1, 2, 4, or 8 TB capacity that supports up to 3.5 GB/Sec sequential read/write performance and industry-leading value in terms of TB/$k.
Download Datasheet Product Details
Software
Radar Simulation Software
Software  from Remcom

WaveFarer® is a high fidelity radar simulator that accounts for multipath and scattering from structures and vehicles in the immediate environment of a radar system as well as key atmospheric and scattering effects for frequencies up to and beyond 100 GHz. Applications include simulation of automotive drive scenarios, indoor sensors, and far-field radar cross-section (RCS).
Download Datasheet Product Details
RF Amplifier
50 W GaN MMIC Power Amplifier from 8 to 11 GHz
RF Amplifier  from WAVEPIA Co,. Ltd.

The WPGM0811050M from WavePia is a GaN HEMT MMIC Power Amplifier that operates from 8 to 11 GHz. This X-Band power amplifier delivers over 50 W of saturated output power with 22.11 dB of gain and has a power-added efficiency of 32.42%. It has been fabricated on a 0.25 µm GaN-on-SiC process.
Download Datasheet Product Details
RF Transistor
800 W GaN Transistor from 1.2 to 1.4 GHz
RF Transistor  from Wolfspeed

The CGHV14800F1 from Wolfspeed is a GaN Transistor that operates from 1.2 to 1.4 GHz. It delivers a saturated output power of 800 W (59 dBm) with a drain efficiency of 65%. This transistor has a large signal gain of 14 dB and a small signal gain of 18 dB. It can handle 45 dBm of input power and has a return loss of 12 dB (input) & 5 dB (output). The transistor is ideal for defense and commercial-related avionics (TACAN, DME, IFF), L-band radar, and general-purpose amplification applications.
Download Datasheet Product Details
Sponsored by Digi_key
Antenna Solutions for Consumer Electronics
Abracon's Antenna Solutions for Consumer Electronics
Abracon’s antennas for consumer electronics offer compact chip, patch, flexible PCB, and external whip solutions to meet the high-performance connectivity requirements of wireless communication protocols in IoT devices. The available options are ideal for cellular, GNSS, Wi-Fi, and Bluetooth. Click here to learn more.
RF Transistor
600 W GaN Doherty Power Transistor from 700 to 1000 MHz
RF Transistor  from Ampleon

The C4H10P600A from Ampleon is a Doherty Power Transistor that operates from 0.7 to 1 GHz. It delivers an output power of 600 W with a power gain of 18.2 dB and has a drain efficiency of more than 56%. This GaN transistor has low output capacitance that allows it to deliver improved performance for Doherty applications. It is designed for broadband operation and has excellent digital pre-distortion capabilities. Ideal for base stations.
Download Datasheet Product Details
RF Amplifier
2 kW Pulsed Solid-State Power Amplifier from 2 to 8 GHz
RF Amplifier  from Exodus Advanced Communications

The AMP2085DBP-LC-2KW from Exodus Advanced Communications is a Solid-State Pulse Power Amplifier that operates from 2 to 8 GHz. It delivers a pulsed output power of 2 kW with a power gain of more than 63 dB. This Class AB amplifier utilizes an advanced high-power linear design and includes built-in protection circuits with extensive monitoring of critical parameters such as voltage, current, noise voltage, reflected power, and VSWR.
Download Datasheet Product Details
RF Amplifier
1000 W Solid-state, Broadband Amplifier System from 1 to 2.5 GHz
RF Amplifier  from AR RF/Microwave Instrumentation

The 1000S1G2z5B from AR RF/Microwave Instrumentation is a Solid-state, Self-contained, Air-cooled, Broadband Amplifier system that operates from 1 to 2.5 GHz. This amplifier when used with a sweep generator, provides over 1000 W of RF power with more than 60 dB of gain. It is protected from RF input overdrive by an input leveling circuit which controls the RF input level to the amplifier's first stage when the input level is increased above 0 dBm.
Download Datasheet Product Details
Microwave Generator
1.6 kW GaN SSPA Based Microwave Generator from 2.4 to 2.5 GHz
Microwave Generator  from RFHIC

The RIM251K6-20G from RFHIC is a GaN SSPA based Microwave Generator that operates from 2400 to 2500 MHz. It delivers an adjustable output power from 100 to 1600 W with an efficiency of up to 55%. The generator uses GaN-on-SiC HEMT transistors that provide excellent thermal stability and efficiency for high-power applications.
Download Datasheet Product Details
RF Spectrum Analyzer
USB-Powered Real-Time Spectrum Analyzer from 9 kHz to 6 GHz
RF Spectrum Analyzer  from Signal Hound

The BB60D from Signal Hound is a Spectrum Analyzer that operates from 9 kHz to 6 GHz. It streams 140 MB/sec of digitized RF signals to a PC over the USB 3.0 interface, providing an instantaneous bandwidth of 27 MHz, and sweeping at speeds of 24 GHz/sec. This analyzer performs spectrum analysis using the proprietary application programming interface (API) which can execute up to 1.2 million FFT spectrums or 320 million FFT points every second, delivering real-time spectrum data.
Download Datasheet Product Details
RF Amplifier
25 dBm RF Amplifier from 0.5 to 26 GHz
RF Amplifier  from AmpliTech

The AWMP-30-00502600-4525-D4 from AmpliTech is an RF Amplifier that operates from 0.5 to 26 GHz. It delivers an output P1dB of more than 25 dBm with a gain of 30 dB and has a noise figure of less than 4.5 dB. The amplifier is manufactured using state-of-the-art pHEMT technology and complies with MIL-883 and MIL-45208 military standards for construction and reliability.
Download Datasheet Product Details
Gain Equalizer
Passive Gain Equalizer from 26.5 to 40.0 GHz
Gain Equalizer  from Planar Monolithics Industries

The EQL-26D5G40G-1D5DB-292MF from Planar Monolithics Industries is a Passive Amplitude Gain Equalizer that operates from 26.5 to 40.0 GHz. It can handle an input power of up to 0.5 W, has an insertion loss of less than 1.5 dB, and has a VSWR of less than 2:1. The equalizer has a frequency/amplitude slope of -0.41 dB/GHz (±0.06 dB/GHz) and an amplitude accuracy of ±0.5 dB.
Download Datasheet Product Details
Wireless SoC
Wi-Fi (802.11n) + Bluetooth 5.0 Combo SoC for Mobile Devices
Wireless SoC  from Broadcom

The BCM43013 from Broadcom is a Wi-Fi (802.11n) and Bluetooth 5.0 Combo Chipset that is designed for mobile platforms and accessories. It has a single spatial stream that delivers a data rate of up to 72 Mbps (Wi-Fi). This chip has full IEEE 802.11a/b/g/n legacy compatibility with enhanced performance and supports IEEE 802.11n beamforming.
Download Datasheet Product Details
Wireless SoC
2.4 and 5 GHz Wi-Fi 6 and Bluetooth 5.3 Combo SoC
Wireless SoC  from NXP Semiconductors

The AW690 from NXP Semiconductors is a Wi-Fi 6 and Bluetooth 5.3 Combo SoC that operates at a frequency of 2.4 and 5 GHz. It delivers a peak Wi-Fi data rate of 1.2 Gbps and a Bluetooth data rate of up to 3 Mbps (EDR). This SoC supports 1x1 concurrent dual Wi-Fi (CDW) which means it can operate in both the 2.4 GHz and 5 GHz bands (SISO operation).
Download Datasheet Product Details
RF Switch
MMIC SPDT Switch from 0.1 to 8.5 GHz for WLAN/V2X Applications
RF Switch  from onsemi

The NSG1001MX from onsemi is an MMIC SPDT Switch that operates from 0.1 to 8.5 GHz. It has an insertion loss of 0.85 dB, more than 17 dB of isolation, a switching time of 100 ns, and can handle up to 30 dBm of power. This switch has been designed for WLAN and V2X applications. It is available in a surface mount package and can also be used in portable devices like smartphones or automotive antennas.
Download Datasheet Product Details
Beamforming IC
4x2 Beamforming IC from 17.7 to 20.2 GHz for SATCOM Applications
Beamforming IC  from Anokiwave

The AWMF-0197 from Anokiwave is a highly integrated silicon quad-core beamforming IC that operates from 17.7 to 20.2 GHz. It supports four dual polarization radiating elements with full polarization flexibility (RHCP, LHCP, linear). The receiver beamforming IC has 6-bit phase control and 5-bit gain control with the ability to provide gain compensation over temperature.
Download Datasheet Product Details
Frequency Multiplier
GaAs Schottky Diode Based Frequency Doubler from 4 to 15 GHz
Frequency Multiplier  from Marki Microwave

The MMD-0415H from Marki Microwave is a Passive Frequency Doubler that converts input frequencies from 2 – 7.5 GHz to output frequencies from 4 – 15 GHz. It is based on GaAs Schottky diode technology and can handle an input power of up to 29 dBm. It has a conversion loss of less than 14 dB and provides harmonic suppressions of up to 36 dBc throughout the frequency band.
Download Datasheet Product Details
Frequency Multiplier
mmWave Active Frequency Doubler with 26.5 to 40 GHz Output Frequency
Frequency Multiplier  from Fairview Microwave

The FMFX2021 from Fairview Microwave is an Active Frequency Doubler that multiplies an input frequency from 13.25 – 20 GHz to an output frequency from 26.5 – 40 GHz. The doubler can deliver an output power of 22 dBm when driven by a 4 dBm signal and has harmonics of -15 dBc. It requires a DC supply of 6 V and consumes 350 mA of current.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]