PREV 21 Dec, 2022 NEXT

New RF and Microwave Products this Week

21 Dec, 2022 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 21 Dec, 2022
 
Sponsored by APITech
 
 
New RF and Microwave Products this Week
Vector Network Analyzer
4-Port USB Vector Network Analyzer from 100 kHz to 9 GHz
Vector Network Analyzer  from Copper Mountain Technologies

The C4409 from Copper Mountain Technologies is a 4-port modular vector network analyzer that operates from 100 kHz to 9 GHz. The VNA can measure all S parameters and can be controlled using any Windows PC or laptop. It has a dynamic range of up to 162 dB (1 Hz IF BW), directivity of 46 dB and sweep speeds of 10 microseconds per point.
Download Datasheet Product Details
Signal Generator
RF Signal Generator (non-PLL Architecture) from 10 MHz to 6 GHz
Signal Generator  from Boonton

The SGX1006 from Boonton is an RF Signal Generator that operates from 10 MHz to 6 GHz with a step size of 0.001 Hz. It can provide an output power of up to 16 dBm with a resolution of 0.01 dB and has a single sideband phase noise of -122 dBc/Hz. The generator utilizes a unique non-PLL (phase locked loop) design with a digital front-end and proprietary back end to provide ultra-fine frequency resolution, lightning-fast frequency switching, ultra-low phase noise and jitter, and superior reliability.
Download Datasheet Product Details
Signal Generator
50 MHz to 6 GHz Vector Signal Generator
Signal Generator  from Signal Hound

The VSG60A is a vector signal generator that operates from 50 MHz to 6.0 GHz with a real-time bandwidth of 40 MHz. It has an output amplitude from -55 to 7 dBm and has a number of pre-programmed modulation types inbuilt – these include Wi-Fi, QAM, PSK, CW, Pulse, Multi-tone, and many more. It has an arbitrary I/Q sample rate from 12.5 kSPS to 51.2 MSPS which lets you stream waveforms of virtually any size from your computer.
Download Datasheet Product Details
RF Variable Attenuator
31.5 dB mmWave Digital Step Attenuator from 100 MHz to 43.5 GHz
RF Variable Attenuator  from Mini Circuits

The ZX76-44G-30-K+ from Mini Circuits is a Digital Step Attenuator that operates from 100 MHz to 43.5 GHz. It has an adjustable attenuation range from 0 to 31.5 dB in 0.5 dB steps with a switching time of less than 400 ns. This attenuator offers glitch-free attenuation transitions and hence, reduces noise in the system and eliminates the risk of a transient voltage spike that can damage sensitive components in a system.
Download Datasheet Product Details
Waveguide Combiner / Divider
2-Way Waveguide Power Combining System from 6 to 18 GHz
Waveguide Combiner / Divider  from Scientific Microwave Corporation

The WRD500 from Scientific Microwave Corporation is a 2-Way Waveguide Power Combining Assembly that operates from 6 to 18 GHz. It consists of a 2-way combiner integrated with a dual broad-wall coupler with a high matching level for power amplifying structures or antenna feeding systems. This assembly is available in a module with SMA-male input connectors and a WRD500 waveguide output interface. It can be used in power-combining networks, radar systems, and satellite applications.
Download Datasheet Product Details
RF Amplifier
Dual Bi-Directional Solid-State Power Amplifier from 2.2 to 2.5 GHz
RF Amplifier  from Triad RF Systems

The TTRM2005DR from Triad RF Systems is a Dual Bi-Directional Solid-State Power Amplifier that operates from 2200 to 2500 MHz. This SSPA delivers a saturated output power of 25 W (~44 dBm) with a gain of 25 dB. It can be manually or automatically switched between Tx and Rx paths and has a Tx/Rx switching time of less than 2 µs.
Download Datasheet Product Details
Sponsored by APITech
APITech
Save time and money with the standard and configurable modular power line EMI filter
Rugged, high-performance EMI filters where Swap-C is critical. Small designs are vertically integrated with APITech components for high-reliability filtering. Standard choices to meet your needs: 3 package sizes, 3 attenuation levels, and 3 current options with manufacturing lead time of 6 to 8 weeks.  Click here to learn more.
Switch Matrix
8 x 8 Non-Blocking Switch Matrix from 350 MHz to 6 GHz
Switch Matrix  from JFW Industries

The 50MS-426 from JFW Industries is an 8 x 8 Non-Blocking Solid-State Switch Matrix that operates from 350 to 6000 MHz. It can handle an input power of +30 dBm, has a switching speed of 10 ms, and has an insertion loss of 18.8 dB. This switch matrix provides output-to-output isolation of 75 dB (set to different inputs), input-to-output isolation of 95 dB and input-to-input isolation of 75 dB.
Download Datasheet Product Details
90 Degree Hybrid Coupler
50 W, 90° Hybrid Coupler from 0.5 to 1.1 GHz
90 Degree Hybrid Coupler  from MECA

The 705S-0.800 from MECA is a 90° Hybrid Coupler that operates from 0.5 to 1.1 GHz. This 3.1 dB coupler provides 30 dB of isolation and has a frequency sensitivity of ±0.6 dB. It can handle an average power of 50 W and a peak input power of 3 kW. The coupler is available in a module that measures 3.06 x 1.25 x 0.38 inches and has SMA-female connectors.
Download Datasheet Product Details
180 Degree Hybrid Coupler
30 W, 180° Hybrid Coupler from 6 to 26.5 GHz
180 Degree Hybrid Coupler  from ChengDu Leader Microwave Technology

The LDC-6/26.5-180S from Leader Microwave is a 180° Hybrid Coupler that operates from 6 to 26.5 GHz. This 3 dB coupler has an insertion loss of less than 2.2 dB and provides more than 14 dB of isolation. It can handle an input power of up to 30 W and has a VSWR of less than 1.7:1. The coupler has an amplitude imbalance of ±0.8 dB and a phase imbalance of ±10°.
Download Datasheet Product Details
RF Cable
100 ft Low Loss Coaxial Cable with N-type Terminations
RF Cable  from Bolton Technical

The BT512174 from Bolton Technical is a 50 Ohm 100 ft cable with N-Type Male connectors. It is an based on Times Microwave LMR®400 cable with an ultra-low-loss cable which provides 6 dB of loss per 100 feet. The cable is CL3-rated and can carry up to 300 volts, making it ideal for commercial applications and buildings.
Download Datasheet Product Details
OCXO
Ultra-Low Power OCXO from 8 to 150 MHz
OCXO  from Dynamic Engineers

The OCXO3321AW02 from Dynamic Engineers is an OCXO with a frequency range from 8 to 150 MHz. It provides an HCMOS/Sine output waveform with an SSB phase noise of -170 dBc/Hz @10 kHz offset. This oscillator has a frequency stability vs. operating temperature of ±2 ppb and a minimum warm-up time of the 30s.
Download Datasheet Product Details
XO
32.768 MHz Crystal Oscillator for Automotive/Industrial Applications
XO  from Abracon LLC

The ASAKDVAIG from Abracon LLC is a Crystal XO that operates at a frequency of 32.768 MHz. It provides a CMOS/LVCMOS compatible output and has a frequency stability of ±100 ppm. This AEC-Q200-qualified oscillator has a start-up time of less than 10 ms and a rise/fall time of less than 50 ns. It requires a DC supply from 1.62 to 3.63 V and consumes less than 100 µA of current.
Download Datasheet Product Details
Sponsored by APITech
 
 
RF Transistor
100 W GaN-on-SiC Transistor from 2400 to 2500 MHz
RF Transistor  from RFHIC

The IE24100P from RFHIC is a GaN-on-SiC Transistor that operates from 2400 to 2500 MHz. It delivers an output power of 100 W with a gain of 15 dB and has an efficiency of 73.3%. This transistor is based on RFHIC’s cutting-edge gallium nitride (GaN) solid-state technology and is designed to replace current vacuum tubes like the magnetron, klystron, and TWTs. It can operate in both continuous wave (CW) and pulse modes and requires a DC supply of 52 V.
Download Datasheet Product Details
RF Up-down Converter
mmWave Frequency Up/Down Converter with DC - 7 GHz IF and 24.25 - 49 GHz RF
RF Up-down Converter  from Mobix Labs

The MOBX200 from Mobix Labs is a Frequency Up/Down Converter IC with an IF frequency range from DC to 7 GHz and an RF frequency range from 24.25 to 49 GHz. It is a 5G NR mmWave band integrated circuit that offers optimum performance over the 5G-NR FR2 frequency bands (n257 through n262) in beamforming applications while supporting frequencies ranging from zero IF, low IF, or 3 GHz to 7 GHz for up-conversion to 5G NR FR2 mmWave frequencies of 24.25 GHz to 49 GHz.
Download Datasheet Product Details
Multicoupler
1x6 Multicoupler from 20 to 3000 MHz
Multicoupler  from Mu-Del Electronics

The MMDP-203000F from MU-DEL Electronics is an RF Multicoupler that operates from 20 to 3000 MHz. It has 1 input port and 6 output ports, provides port-to-port isolation of more than 40 dB, and output-to-input isolation of more than 60 dB. This multi-coupler provides a gain of up to 3 dB and has a noise figure of less than 6 dB.
Download Datasheet Product Details
Power Divider
2 Way Passive Power Splitter/Combiner Series from 850 to 2150 MHz
Power Divider  from ETL Systems

The COM02L1P-2502 Series from ETL Systems are 2-Way Passive Splitters/Combiners that operate from 850 to 2150 MHz. They have an insertion loss of 0.4 dB and provide 25 dB of isolation. These splitters/combiners have an amplitude balance of ±0.5 dB and a phase balance of ±5º. They are available in tapped screw or through-hole mounted rugged compact enclosures that measure 76.10 x 50.40 x 18.80 mm.
Download Datasheet Product Details
Tunable Filter
Digitally Controlled Tunable Band Pass Filter from 24 to 40 GHz
Tunable Filter  from Otava, Inc

The OTFL301 from Otava is a Digitally Tunable Bandpass Filter with a frequency tuning range from 24 to 40 GHz. It has an insertion loss of 7 dB and provides an IIP3 of 40 dBm. The filter is based on SOI technology and is a single-chip replacement for discrete filter banks. It requires a DC supply of 1.8/2.5 V and consumes under 10 uA of current.
Download Datasheet Product Details
Base Station Antenna
Dual-Polarized 4ft Point-to-Point Antenna from 7.725 to 8.5 GHz
Base Station Antenna  from Radio Frequency Systems

The UXA4-78AB from Radio Frequency Systems is a Point-to-Point Antenna that operates from 7.725 to 8.5 GHz. This dual polarized antenna provides a gain of 37.6 dBi and has a VSWR of less than 1.08:1. It has a 3 dB beamwidth of 2.1° and a front-to-back ratio of 62 dB. The antenna can change frequencies in the field with a high cross-polarization discrimination feature and is designed for all microwave applications and for use in environments with increased interference.
Download Datasheet Product Details
RF Cable Assembly
Phase-Stable and Flexible Cable Assemblies from DC to 26.5 GHz
RF Cable Assembly  from Maury Microwave

The StabilityFlex™ from Maury Microwaves are Phase-Stable Cable Assemblies that operate from DC to 26.5 GHz. They are available in 24", 36", 48", and 60" lengths (custom lengths also available) with N-type or SMA connectors. These ultra-flexible cable assemblies have a phase stability vs flexure of ±4°, amplitude stability vs flexure of ±0.05 dB, and provide shielding of more than 100 dB.
Download Datasheet Product Details
Front End Module
2.4 GHz WLAN and Bluetooth Front End Module
Front End Module  from Skyworks Solutions

The SKY85203-11 from Skyworks is a 2.4 GHz WLAN and Bluetooth Front End Module. It consists of an SP3T switch and a 2.4 GHz low-noise amplifier with a bypass mode in an ultra-compact package. The FEM provides an Rx gain of 14.5 dB with a noise figure of 2 dB and has a TX to Bluetooth path loss of 0.7 dB. It can switch between WLAN receive, WLAN transmit, and Bluetooth ports.
Download Datasheet Product Details
RF Module
Highly Secure Matter-over-Thread + Bluetooth (LE) 5.3 MCU
RF Module  from NXP Semiconductors

The K32W148 from NXP Semiconductors is a Three-Core Wireless MCU that supports IEEE 802.15.4 mesh network protocols, Matter over Thread, Zigbee, and Bluetooth Low Energy 5.3. It is ideal for industrial, Air Conditioning (AC), building safety, building security, heat metering, access management, smart home, home security, and surveillance applications.
Product Details
Beamforming IC
5G Beamforming phased array Antenna in Package Module from 37 to 41 GHz
Beamforming IC  from Sivers Semiconductors

The Summit3741 from Siver Semiconductors is a 5G Beamforming phased array Antenna in Package (AiP) module that operates from 37 to 41 GHz covering the FR2 Band n260. It offers exceptionally high linear output power, efficiency, and extreme integration. This AiP module has been designed to enable Lambda/2 lattice spacing when tiled together for higher EIRP applications.
Download Datasheet Product Details
Low Noise Block
X-Band Earth Observation Low Noise Block from 7.75 to 8.5 GHz
Low Noise Block  from Orbital Research

The LNBX-EO from Orbital Research is an X-Band Earth Observation Low Noise Block (LNB) Downconverter that converts an input RF frequency of 7.75 - 8.5 GHz to an IF frequency of 950 - 1700 GHz. It has a 6.8 GHz local oscillator (external reference). This LNB provides 60 dB of gain with a noise figure of 0.8 dB and has a P1dB of 15 dBm.
Download Datasheet Product Details
Power Divider
Space Qualified 2-Way Power Divider from 7.1 to 8.5 GHz
Power Divider  from Renaissance Electronics Corporation

The 10A7ND-2S-S from Renaissance Electronics Corp. is a 2-Way Power Divider that operates from 7.1 to 8.5 GHz. It can handle an input power of 25 W, provides 20 dB of isolation, and has an insertion loss of 0.55 dB. The divider has an amplitude balance of 0.3 dB and a VSWR of 1.2:1. It uses NASA-compliant low-outgassing materials and is available in a hermetically sealed module that measures 1 x 0.85 x 0.39 inches.
Download Datasheet Product Details
RF Switch
Broadband SPDT Switch from DC to 100 GHz
RF Switch  from Altum RF

The ARF2003 from Altum RF is a Single pole double throw (SPDT) switch that operates from DC to 100 GHz. It provides 30 dB of isolation and has an insertion loss of less than 4 dB. The switch requires a DC supply of 0/-5 V and has its I/O ports internally matched to 50 ohms. It is available as a bare die that measures 0.80 x 0.80 x 0.05 mm and is ideal for test & measurement, radar, and broadband telecommunications applications.
Download Datasheet Product Details
RF Inductor
Multilayer Ceramic Inductors from 1 to 470 nH for Automotive Applications
RF Inductor  from Wurth Elektronik

The WE-MCI Series from Wurth Elektronik are Automotive-Qualified Multilayer Ceramic Inductors with Inductance values from 1 to 270 nH (0402) and 1 to 470 nH (0603). They have tight inductance tolerance values of ±5%. These inductors have a ceramic body to ensure robustness against electromagnetic interference with a double-side polarity marking.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Indsutry. We provide the latest news, information on new product releases, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]