| New RF and Microwave Products this Week |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Real-Time & Continuous Spectrum Intelligence Platform | |
RF Spectrum Analyzer
from thinkRF
|
| The Spectrum eXperience Management (SXM) System from thinkRF is a real-time wireless infrastructure monitoring / intelligence platform. It allows operators to see network deployments by their competitors and proactively determine a response. Not only can operators track where competitors are deploying new infrastructure, but they can also identify the technologies and standards they are using, such as 5G wireless, MIMO beamforming, spectrum sharing, or new bands. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
| Sponsored by Quantic Wenzel | | | |
|
|
| Amplified AWGN Noise Modules from 10 Hz to 18 GHz | |
Noise Source
from Noisecom
|
| The NC1000 Series from Noisecom are Amplified AWGN Noise Modules that operate from 10 Hz to 18 GHz. They produce white Gaussian noise with noise power up to +13 dBm and have a typical temperature coefficient of 0.025 dB/°C. These high-noise power modules are designed for secure communications and signal jamming, while the low power noise modules with high crest factor are used for signal impairment in BER, and Jitter applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 3D EM Simulation Software for High-Fidelity Computations | |
Software
from Remcom
|
| XFdtd is a full wave 3D EM solver that simplifies the analysis of complex EM problems and leads the market in FDTD-based modeling and simulation. With unrivaled speed, XF is the leader for complex, high-fidelity EM simulations. Applications include microwave devices such as waveguides, power dividers, and filters; antenna design and placement; EMI/EMC testing; static discharge; signal integrity; SAR validation; radar and scattering; and photonics. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 6000 W Solid-State Power Amplifier from 80 to 1000 MHz | |
RF Amplifier
from AR RF/Microwave Instrumentation
|
| The 6000W1000 from AR RF/Microwave Instrumentation is a Solid-State Power Amplifier that operates from 80 to 1000 MHz. This self-contained, air-cooled amplifier, when used with an RF sweep generator, provides more than 6000 watts of power with a gain of over 67.8 dB. It has a Digital Control Panel (DCP) from where the gain and power level can be controlled. Typical applications include RF susceptibility testing, antenna and component testing, watt meter calibration, and as a driver for frequency multipliers and higher power amplifiers. |
| |
Download Datasheet
Product Details | |
|
|
|
| 15 W RF Termination from DC to 12.4 GHz | |
Termination
from MECA
|
| The 403-7 from MECA is an RF Termination that operates from DC to 12.4 GHz. It can handle an average input power of up to 15 W and peak input power of 2 kW. The termination is matched to 50 ohms and has a VSWR of less than 2:1. It is available in a module with an SMA-male connector. It can be used for both commercial and military applications. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Quantic Wenzel | | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 18 W GaN Power Amplifier MMIC from 27.5 to 31 GHz | |
RF Amplifier
from Nxbeam Inc
|
| The NPA2030-TB-501 from Nxbeam is a Power Amplifier MMIC that operates in the Ka-band from 27.5 to 31 GHz. It delivers a saturated output power of 18 W with a linear gain of 25 dB and an average PAE of 34%. This amplifier has been developed on a 0.2um GaN-on-SiC process, requires a DC supply from 20 to 28 V, and consumes less than 1.5 A of current. It is deal for is ideal for use in Ka-band satellite communications, 5G infrastructure, and point-to-point/multipoint digital radios. |
| |
Download Datasheet
Product Details | |
|
|
|
| SPST Tuning Control Switch from 100 to 3000 MHz | |
RF Switch
from pSemi, A Murata Company
|
| The PE613010 from pSemi is an SPST Tuning Control Switch that operates from 100 to 3000 MHz. The switch can handle an input power of up to 38 dBm and has an insertion loss of less than 0.95 dB. It has a switching time of 7 µs and provides up to 11 dB of isolation. It is based on Peregrine’s UltraCMOS technology with an open reflective architecture and can be used for a wide variety of tuning circuit topologies with an emphasis on impedance matching and aperture tuning applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 5G NR (NSA/SA) and C-V2X/DSDS Modules for Automotive Applications | |
V2X Module
from Quectel
|
| The AG59xE Series from Quectel are 5G-NR and C-V2X/DSDS Automotive Modules. They support both 5G-NR NSA and SA architectures and include support for 4G/3G/2G fallback. They deliver a downlink data rate of up to 4.4 Gbps and an uplink data rate of up to 900 Mbps in 5G NSA mode. These modules support multiple input multiple output (MIMO) technology and optionally support C-V2X PC5 direct communications and DSDS for improved automated driving services. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Ruggedized Precision TCXO from 1 to 60 MHz | |
TCXO
from SiTime
|
| The Endura™ SiT5541 from SiTime is a Precision Super-TCXO that operates from 1 to 60 MHz. It provides an LVCMOS, clipped sinewave output, has a stability-over-temperature of ±10 ppb (from -40°C to 105°C), and delivers a typical frequency slope of ±0.5 ppb/°C. This MEMS-based oscillator is resistant to shock and vibration with an acceleration sensitivity of 0.01 ppb/g and provides stable timing in the presence of environmental stressors such as airflow, temperature perturbation, vibration, shock, and EMI. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
