1. everything RF
  2. RF Newsletters
more
PREV 15 Feb, 2023 NEXT

New RF and Microwave Products this Week

15 Feb, 2023 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 15 Feb, 2023
 
Sponsored by Mouser
 
 
New RF and Microwave Products this Week
RF Spectrum Analyzer
Battery-Powered Portable RF Spectrum Analyzer from 9 kHz to 3 GHz
RF Spectrum Analyzer  from Anritsu

The Field Master™ MS2070A from Anritsu is a Handheld RF Spectrum Analyzer that operates from 9 kHz to 3 GHz. It conducts reliable and accurate RF measurements in a variety of general-purpose fields, labs, and manufacturing environments at an economical price. This spectrum analyzer has sweep speeds of up to 32 GHz/s in common low-noise configurations and can conduct a variety of “smart” measurements, including occupied bandwidth (OBW), channel power, and adjacent channel power (ACP).
Download Datasheet Product Details
Fixed Attenuator
Bulkhead Cryogenic Attenuators from DC to 18 GHz
Fixed Attenuator  from API Technologies

The 2142-CRYO from Spectrum Control are Bulkhead Cryogenic Attenuators that operate from DC to 18 GHz. They are available in attenuation values of 3, 6, 10, and 20 dB with an accuracy of ±0.5 dB. These attenuators use APITech’s in-house resistor fabrication process and have been tested to temperature of 4 mK.
Download Datasheet Product Details
Waveguide Mixer
Double-Balanced Waveguide Down Converter Mixer from 75 to 110 GHz
Waveguide Mixer  from Pasternack Enterprises Inc

The PE12D1000 from Pasternack is a Waveguide Downconverter Mixer with an RF/LO frequency range from 75 to 110 GHz and an IF frequency range from DC to 18 GHz. It has a double-balanced circuit design with an LO drive power level of 13 dBm and a conversion loss of 9 dB. This mixer utilizes high-performance and low-capacitance GaAs Schottky beam leads diodes.
Download Datasheet Product Details
RF Inductor
Wire-wound Ferrite Chip Inductors from 11 nH to 22 µH
RF Inductor  from Coilcraft

The 0805AF Series from Coilcraft are Wire-wound Chip Inductors available with inductance values from 11 nH to 22 µH. They feature ferrite core construction and heavy gauge wire for high current handling and broadband filtering. These inductors have a tight standard tolerance of ±5% on all values. These chip inductors measure 2.29 x 1.73 x 1.52 mm.
Download Datasheet Product Details
Switch Matrix
8x8 Non-Blocking Switch Matrix Assembly from 5 to 1218 MHz
Switch Matrix  from JFW Industries

The 75MS-052 from JFW Industries is an 8x8 Non-Blocking Switch Matrix Assembly that operates from 5 to 1218 MHz. It has bi-directional ports with a switching speed of 10 ms and provides an isolation of more than 70 dB between inputs/outputs. This 75-ohm switch matrix can handle an input power of 20 dBm and has an insertion loss of less than 16.5 dB.
Download Datasheet Product Details
RF Spectrum Analyzer
Real-time Spectrum Monitoring Platform for Better Network Optimization
RF Spectrum Analyzer  from thinkRF

The Spectrum eXperience Management (SXM) System from thinkRF is a Real-time Wireless Infrastructure Monitoring / Intelligence Platform. It provides continuous monitoring of major 4G and 5G parameters with immediate notification of any new, changed or discontinued deployments in an area. This platform can detect and locate spectrum interference and provide evidence-based reporting of transmitters exceeding licensed power levels.
Download Datasheet Product Details
Sponsored by Mouser
Mouser
Robust RF connectors with industrial plating for harsh environments
Amphenol RF Extreme Exposure RF Interconnects are rugged connectors that feature IP67 sealing, high RF performance, and are validated for 720 hours of salt spray endurance. Applications include marine GPS, remote base stations, environmental measuring equipment, and search/rescue communications. Click here to learn more.
Horn Antenna
High-Power Horn Antenna from 2.5 to 7.5 GHz
Horn Antenna  from AR RF/Microwave Instrumentation

The ATH2G8A-1 from AR RF/Microwave Instrumentation is a High-power Horn Antenna that operates from 2.5 to 7.5 GHz. It can handle up to 12 kW of CW input power, provides a typical gain of 18 dB and has a VSWR of less than 1.8:1. The antenna provides a field intensity of up to 500 V/m which makes it suitable for RFI/EMI field testing within and beyond the confines of a shielded room.
Download Datasheet Product Details
Software Defined Radio
7/8 GHz Radiation-Tolerant Software-Defined TT&C Radio for Space Applications
Software Defined Radio  from Rocket Lab

The Frontier-X from Rocket Lab is a Software Defined Telemetry, Tracking, and Control (TT&C) Radio. It operates in the X-band from 7145 to 7235 MHz (Rx) and 8400 to 8500 MHz (Tx). This radio is based on the Johns Hopkins University (JHU) Applied Physics Lab (APL) Frontier Radio and features Deep Space Network (DSN) and other typical waveforms (SN, KSAT, SSC).
Download Datasheet Product Details
RF Shielded Test Enclosure
Portable RF Shield Test Box from 20 MHz to 12 GHz for 5G/Wi-Fi 7 Testing
RF Shielded Test Enclosure  from RF Electronics

The HDRF-7170 from RF Electronics is a Portable RF Shield Test Box that is designed for the frequency range from 20 MHz to 12 GHz. It has thick RF-absorbing foam that deadens standing waves and reflections. The test box has shielded power filters for powering devices placed inside the box while blocking all wireless signals. It is designed and developed for WLAN, and wireless device testing.
Download Datasheet Product Details
RF Shielded Test Enclosure
Rack-Mountable RF Shield Box from 0.7 to 6 GHz
RF Shielded Test Enclosure  from Ranatec

The RI 181 from Ranatec is an Rack-Mountable RF Shield Box that operates from 0.7 to 6 GHz. It has been designed to provide a high degree of shielding from overall cellular mobile frequency bands (2G, 3G, 4G, and 5G), Wi-Fi, and Bluetooth. This shield box has an inner dimension of 400 x 300 x 85 mm, provides an attenuation of more than 60 dB (at 3 GHz), and can block all wireless signals from various cellular and WLAN devices in its vicinity.
Download Datasheet Product Details
RF Cable Assembly
SMA to N-Type RF Cable Assembly from DC to 18 GHz
RF Cable Assembly  from HASCO Components

The HLL142-S1-NP-24 from HASCO Components is an RF Test Cable Assembly that operates from DC to 18 GHz. It uses a 50 ohm cable that measures less than 0.195 inches in diameter and has a minimum bend radius of 1.0 inches. The cable has a shielding effectiveness of 95 dB and has a velocity of propagation of 80%. It can handle a CW input power of 510 W, has an insertion loss of 0.48 dB per feet (@18 GHz), and has a capacitance of 82 pF/ft.
Download Datasheet Product Details
RF Cable Assembly
7-Inch SMA Straight to SMP Right-Angle Cable Assembly from DC to 18 GHz
RF Cable Assembly  from Amphenol RF

The 095-902-581-007 from Amphenol RF is an SMA (Straight) Plug to SMP Right Angle Plug Cable Assembly that operates from DC to 18 GHz. It uses a Times TFlex 405 cable that measures 7 inches (178 mm) in length and has an impedance of 50 ohms. This between-series cable assembly has an operating temperature range from -65 to +165°C.
Download Datasheet Product Details
Sponsored by Mouser
 
 
XO
32.768 kHz Ultra-Low Power Crystal Oscillator for Wearables
XO  from Dynamic Engineers

The XO2016BM-ULP-32.768KHz from Dynamic Engineers is an Ultra-Low Power Crystal Oscillator that operates at 32.768 kHz. It provides a CMOS output waveform (45-55% duty cycle) with a frequency stability of ±10 ppm. This crystal oscillator has a start-up time of less than 8 ms and a rise/fall time of 10 ns. It requires a DC supply of 1.5/1.8 V and consumes less than 1.8 µA of current.
Download Datasheet Product Details
Switched Filter Bank
Sub-Octave Switch Filter Bank from 2 MHz to 8 GHz
Switched Filter Bank  from ATEK MIDAS

The ATEK950P6 from ATEK MIDAS is a Sub-Octave Switch Filter Bank that operates from 2 to 8000 MHz. It consists of an SP8T switch followed by 7 fixed frequency bandpass filters which are followed by another SP8T switch. Each SP8T switch is used to send the input/output signals to 2 pins. This allows users to bypass the filter bank off-chip.
Download Datasheet Product Details
RF Amplifier
Thermally Compensated Linear Amplifier from 42 kHz to 40 GHz
RF Amplifier  from HYPERLABS

The HL5887 from Hyperlabs is a Linear Amplifier that operates from 42 kHz to 40 GHz. It delivers a saturated output power of 21 dBm with a small signal gain of 15 dB. This amplifier is thermally compensated to reduce variations in output performance as the temperature changes. It is optimized as a data driver to amplify signals with a minimum amount of eye distortion.
Download Datasheet Product Details
Phase Noise Analyzer
10 MHz to 6 GHz (Optional to 24 GHz) Real-Time Phase Noise Analyzer
Phase Noise Analyzer  from Holzworth Instrumentation

The HA7062C from Holzworth is a real time fully integrated phase noise analysis system that operates from 10 MHz to 6 GHz. It utilizes the same core engine from the HA7402C analyzer along with a pair of high-performance RF Synthesizers as the test signal LOs. The stability of the agile synthesizers operating as LO sources for the high-speed, cross-correlation core enables an extremely reliable phase noise analyzer.
Download Datasheet Product Details
RF Test Set
Sub-6 GHz Wireless Connectivity and IoT Test System
RF Test Set  from LitePoint

The IQxel-M4W 6G from LitePoint is a Multipurpose Wireless Connectivity Test System for frequencies from 400 to 6000 MHz. It is an all-in-one test platform with support for a wide range of IoT WLAN, Bluetooth®, LPWAN, and Cellular wireless RF connectivity standards.
Download Datasheet Product Details
Voltage Controlled Oscillator
MIL-STD-883 Compliant Voltage Controlled Oscillator from 980 to 1215 MHz
Voltage Controlled Oscillator  from Rakon

The RVC1414D from Rakon is a Voltage Controlled Oscillator (VCO) that operates from 980 to 1215 MHz. It has a control voltage from 0 to 10 V, provides over 12 dBm of power and has a phase noise of -90 dBc/Hz (@50 kHz offset). This oscillator has a unique design that enhances system signal integrity and supports clock signals for field-programmable gate arrays (FPGAs).
Download Datasheet Product Details
Bias Tee
400 V Bias-Tee from 10 MHz to 6 GHz for High-Current Applications
Bias Tee  from Lotus Communication Systems

The BT2M6G2P3A400V from Lotus Communication Systems is a Bias-Tee that operates from 10 to 6000 MHz. It can handle a DC voltage of up to 400 V and a maximum DC current of 2300 mA. This RoHS-compliant bias-tee has a low dynamic contact resistance (DCR) and an excellent current handling capability for high current bias-tee applications.
Download Datasheet Product Details
RF Amplifier
1 kW GaN Solid State Pulsed Power Amplifier from 9 to 10 GHz
RF Amplifier  from Empower RF

The 2241 from Empower RF Systems is a Solid-State Pulsed Power Amplifier System that operates from 9 to 10 GHz. It delivers a pulsed output power of 1 kW with a power gain of 65 dB and has a duty cycle from 0.5 to 20%. This amplifier utilizes high-power GaN on SiC devices that provide wide frequency response, high gain, high peak power capability, and low distortions.
Download Datasheet Product Details
Front End Module
Wi-Fi 6/6E Front End Module from 5935 to 7125 MHz
Front End Module  from Qorvo

The QPF4658 from Qorvo is a 6 GHz Wi-Fi 6/6E (802.11ax) Front-End Module that operates from 5945 to 7125 MHz. It integrates a power amplifier (PA), single pole two throw switch (SP2T), and bypassable low noise amplifier (LNA). This FEM has a logarithmic voltage detector for application feedback and features die-level filtering for 2nd and 3rd harmonics.
Download Datasheet Product Details
Band Pass Filter
Passive GaAs Bandpass Filter MMICs with Passbands from 7.4 to 39.3 GHz
Band Pass Filter  from Marki Microwave

The MFBC-0000XPSM Series from Marki Microwave are Passive Bandpass Filter MMICs with passbands from 7.40 to 39.30 GHz. They have a passband insertion loss of less than 2 dB and provide out-of-band rejection of up to 82 dB. These filters are based on GaAs MMIC technology that enables production of smaller filter constructions to replace larger form factor circuit board constructions.
Download Datasheet Product Details
Microwave Backhaul Radio Links
380 Mbps 2x2 MIMO Backhaul Radio from 5.150 to 5.925 GHz
Microwave Backhaul Radio Links  from Proxim

The Edge 1035 from Proxim is a Backhaul Radio that operates from 5.150 to 5.925 GHz. It supports 20 MHz, 40 MHz, and 80 MHz channel sizes (requires a license upgrade), 2x2 MIMO, and delivers a data rate of 380 Mbps. This radio is powered by Proxim’s WORP technology that enables efficient wireless broadband access in a packet-based network.
Download Datasheet Product Details
Antenna
Sub-6 GHz 5G + GNSS Base Station Antennas for Rail and IIoT Applications
Antenna  from PCTEL

The VerStack™ Series from PCTEL are Cellular + GNSS Base Station Antennas that operate from 617 to 6000 MHz. They utilize PCTEL’s broadband element technology to achieve superior bandwidth performance and consist of advanced 5G and GNSS vertically stacked antennas. For cellular applications, they have a linear polarization, a VSWR of less than 2.5:1 and provide a peal gain of 4 dBi.
Download Datasheet Product Details
SATCOM Antenna
74cm Auto-Acquire Flyaway Antenna from 17.8 to 30 GHz
SATCOM Antenna  from C-COM

The iNetVu® FLY-74G from C-COM is a 74 cm Flyaway Antenna that operates in the Ka-Band from 17.8 to 20.2 GHz (Rx Band) and 29 to 30 GHz (Tx Band). This circularly polarized antenna has a self-pointing, auto-acquire system that is configurable with the iNetVu® 7710 controllers, providing fast satellite acquisition within minutes.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, inforamtion on new product releases, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]