| New RF and Microwave Products this Week |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| High Volume Chip Attenuators from DC to 20 GHz | |
Fixed Attenuator
from Smiths Interconnect
|
| The AT Series from Smiths Interconnect are Chip Attenuators that operate from DC to 20 GHz. They are available in multiple frequency configurations (6.4 GHz, 12.4 GHz and 20 GHz) with attenuation values of 0 dB, 6 dB and 10 dB. The attenuators provide excellent attenuation accuracy and flatness. They can handle up to 2 W of CW input power and 20 W of peak power (based on 1 µs pulse width @ 1% duty cycle). They use thick film process technology on an alumina substrate making them ideal for operation in harsh environments. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Quantic Eulex | | | |
|
|
| Sub-6 GHz Transparent Antenna for 5G/4G Cellular Applications | |
Antenna
from Taoglas
|
| The TFX62.A from Taoglas is a Transparent 5G/4G Cellular Antenna that operates from 600 to 6000 MHz. This 'invisible' linearly polarized antenna has an omnidirectional radiation pattern and provides a peak gain of 4.65 dBi with an efficiency of up to 60%. It can be used as an alternative to standard flexible PCB antennas where the antenna is to be installed in a covert area or on a surface that needs to be kept visible. This antenna is ideal for use in automotive and commercial transportation, EV charging & parking bays, digital signage and display screens and point-of-sale kiosk applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 50 MHz to 6 GHz Vector Signal Generator | |
Signal Generator
from Signal Hound
|
| The VSG60A is a vector signal generator that operates from 50 MHz to 6.0 GHz with a real-time bandwidth of 40 MHz. It has an output amplitude from -55 to 7 dBm and has a number of pre-programmed modulation types inbuilt – these include Wi-Fi, QAM, PSK, CW, Pulse, Multi-tone, and many more. It has an arbitrary I/Q sample rate from 12.5 kSPS to 51.2 MSPS which lets you stream waveforms of virtually any size from your computer. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
| Sponsored by Quantic Eulex | | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Low Noise Block from 17.7 to 21.2 GHz | |
Low Noise Block
from ERZIA
|
| The ERZ-LNB-1770-2120-75-1.5 from ERZIA is a Ka-Band Low Noise Block that converts input frequency from 17.7 – 21.2 GHz to output frequency 0.95 – 1.95 GHz. It provides a gain of up to 75 dB which can be adjusted in 0.5 dB steps and has a noise figure of less than 1.5 dB. This LNB comes with an inbuilt PLL for high reliability and dedicated screening of the LNB performance. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 2.4/5/6 GHz Front-End Modules for Wi-Fi 6/7 Applications | |
Front End Module
from Qualcomm
|
| The QXM108x from Qualcomm are 2.4/5/6 GHz Wi-Fi Front-End Modules. They comprise of small-sized RF Front Ends (RFFEs) with integrated active and passive components for use in Wi-Fi 4, Wi-Fi 6, Wi-Fi 5, Wi-Fi 7 applications. These modules consist of a power amplifier (PA), low noise amplifier (LNA), switch, and a directional coupler. They are designed to enable OEMs to quickly develop and launch powerful Wi-Fi solutions at scale with 5G NR and Bluetooth concurrency. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
