1. everything RF
  2. RF Newsletters
more
PREV 22 March, 2023 NEXT

New RF and Microwave Products this Week

22 March, 2023 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 22 March, 2023
 
Sponsored by MPG Solutions
 
 
New RF and Microwave Products this Week
RF Capacitor
Single Layer Binary Capacitors with Multiple Dielectric Options
RF Capacitor  from Quantic Eulex

The XD Series from Quantic Eulex are a type of single layer binary capacitors. Quantic Eulex has developed and patented a ceramic capacitor with a similar form factor as a traditional single-layer capacitor but with a 10-fold increase in capacitance. The patented structure allows for a reduced thickness between the electrodes of the device meaning increased capacitance values for a given dielectric and component size.
Download Datasheet Product Details
RF Amplifier
10 W GaN Bi-Directional Amplifier from 5 to 6 GHz
RF Amplifier  from Triad RF Systems

The TTRM4302 from Triad RF Systems is a Bi-Directional Amplifier that operates from 5000 to 6000 MHz. In Tx mode, it delivers a saturated output power of 10 W (40 dBm) with a gain of 25 dB while in Rx mode, it provides a gain of 15 dB and has a noise figure of 2.5 dB. This class AB amplifier supports manual or automatic Tx/Rx switching and has a switching time of less than 2 µs.
Download Datasheet Product Details
Butler Matrix
16x16 Butler Matrix from 0.7 to 6 GHz for 5G MIMO RF Testing
Butler Matrix  from Spectrum Control

The 8401-16-5 from Spectrum Control is a 16x16 Butler Matrix that operates from 0.7 to 6 GHz. It can handle an input power of 37 dBm, provides more than 10 dB of isolation, and has an insertion loss of less than 24 dB. This butler matrix transfers the signal reciprocally from any of the 16 input ports to any of the 16 output ports with a phase accuracy of ±20°.
Download Datasheet Product Details
RF Cable Assembly
Flexible Microwave Cable Assembly from DC to 50 GHz
RF Cable Assembly  from HUBER+SUHNER

The SUCOFLEX 550S from Huber+Suhner is a Flexible Microwave Cable Assembly that operates from DC to 50 GHz. It has been designed to offer more than 100,000 flex cycles and high electrical performance with an enhanced mechanical design for durability. This Cable Assembly utilizes a patented rotary swaging technology for the flexibility of stranded inner conductors while maintaining the electrical properties of a solid inner conductor.
Download Datasheet Product Details
RF Cable Assembly
18 GHz Ultra Low Loss Flexible Cable Assemblies with SMA Connectors
RF Cable Assembly  from HASCO Components

The HULL320® Series is a series of low loss flexible cable assemblies that operate up to 18 GHz with excellent phase stability vs flexure & temperature. The cable has a capacitance of 23.7 pF/Ft, velocity propagation on 85% and a RF leakage of less than <-90 dB at 18 GHz. These assemblies can handle up to 480 W of power (1480 W at 2 GHz, 840 W at 6 GHz, 650 W at 10 GHz and 480 W at 18 GHz) and a phase stability vs flexure of ±0.5 at 2 GHz and ±4.5 at 18 GHz.
Download Datasheet Product Details
RF Amplifier
60 W Space-Qualified TWT Power Amplifiers from 10.75 to 21.2 GHz
RF Amplifier  from Stellant Systems

The nanoMPM® from Stellant Systems are Power Amplifiers that operate from 10.75 to 12.75 and 17.3 to 21.2 GHz. They deliver a saturated output power of 60 W, and a linear output power of 30 W and have an efficiency of 35%. These amplifiers leverage the best of solid-state and TWT vacuum technology and utilize a high-gain pre-distortion solid-state linearizer, four wideband high-power mini-TWTs, and a proprietary compact nanoMPM® EPC.
Download Datasheet Product Details
Sponsored by MPG Solutions
MPG Solutions
RF & Microwave Advanced Solutions
MPG Solutions is a leading manufacturer of interference mitigation equipment, subsystems & integrated microwave assemblies, receivers, frequency converters, switch matrices, and switched filter banks for numerous applications. Click here to explore our advanced solutions and engineering capabilities. Click here to learn more.
RF Amplifier
2.5 kW Solid-State Power Amplifier from 10 kHz to 250 MHz
RF Amplifier  from Exodus Advanced Communications

The AMP2080F-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 10 kHz to 250 MHz. It delivers a CW-saturated output power of 2500 W with a gain of more than 64 dB and a gain adjustment range of 20 dB. This Class A/AB linear amplifier is ideal for broadband EMI-Lab applications.
Download Datasheet Product Details
RF Amplifier
10 W, Rugged Power Amplifier from 1.3 to 7 GHz for COFDM Applications
RF Amplifier  from SVP Aerospace

The PA from SVP Aerospace is a Power Amplifier that operates from 1.3 to 7 GHz. It delivers an output power of up to 10 W and has an ACPR of -32 dBc. This amplifier provides harmonics suppression of more than 60 dB and includes reverse voltage, reverse RF, overvoltage, fan failure/overheat protection and open/short protection on the RF ports.
Download Datasheet Product Details
RF Amplifier
Low Noise Cryogenic Amplifier from 6 to 8.5 GHz
RF Amplifier  from AmpliTech

The APTC3-06000850-2K00-D2-V from AmpliTech is a Low Noise Cryogenic Amplifier that operates from 6.0 to 8.5 GHz. It has been designed for cryogenic applications down to 4K, with an industry-low Noise Figure of 25K at +296K and 2K at 4K case temperatures across the band. It provides a more than 40 dB of gain with a noise figure of less than 0.029 dB (at 4 K) and has a P1dB of -6 dBm.
Download Datasheet Product Details
RF Variable Attenuator
Solid-State Attenuator Assembly from 200 to 7125 MHz
RF Variable Attenuator  from JFW Industries

The 50PA-1250-XX from JFW Industries is an Attenuator Assembly that operates from 200 to 7125 MHz. It can be customized to have 9 to 16 individually controlled solid-state programmable attenuators that provide an attenuation range of 95 dB with 1 dB steps and have an insertion loss of less than 10.7 dB. This attenuator assembly has a switching speed of 4 ms.
Download Datasheet Product Details
Software
Electromagnetic Analysis Tool for Predicting Radar Cross Section
Software  from Remcom

XGtd from Remcom is a Ray-Based EM Simulation Software for assessing the effects of a vehicle or vessel on antenna radiation, predicting coupling between antennas and predicting radar cross section (RCS). It incorporates techniques including Geometric Optics (GO), the Uniform Theory of Diffraction (UTD), Physical Optics (PO), and the Method of Equivalent Currents (MEC).
Download Datasheet Product Details
90 Degree Hybrid Coupler
50 W, 3 dB Quadrature Hybrid Coupler from 4 to 8 GHz
90 Degree Hybrid Coupler  from MECA

The 705S-6.000 from MECA is a 90° Hybrid Coupler that operates from 4 to 8 GHz. This 3 dB coupler provides 20 dB of isolation and has a frequency stability of ±3°. It can handle an average input power of 50 W and a peak input power of 3 kW. The coupler is available in a module that measures 1.00 x 0.50 x 0.38 inches with SMA-female connectors.
Download Datasheet Product Details
Sponsored by MPG Solutions
 
 
RF Module
Sub-GHz/S-Band/ISM Low-Power Half-Duplex LoRa Transceiver
RF Module  from Semtech

The LR1121 from Semtech is a LoRa Transceiver that operates from 150 – 960 MHz (sub-GHz), 1.9 to 2.1 GHz (S-Band), and 2.4 GHz (ISM). It is a LoRa/(G)FSK half-duplex RF transceiver that provides multi-band LoRa and Long Range - Frequency Hopping Spread Spectrum (LR-FHSS) communication. In the Rx path, it has a low noise figure RX front-end for enhanced LoRa/(G) FSK sensitivity.
Download Datasheet Product Details
RF Module
2.4/5 GHz High-Integrated Wi-Fi 6 + Bluetooth LE 5.2 Combo Module
RF Module  from NXP Semiconductors

The IW611 from NXP Semiconductors is a 2.4/5 GHz Wi-Fi 6 and Bluetooth Low Energy 5.2 Module. For Wi-Fi operation, it has channel bandwidths of up to 80 MHz and includes support for uplink/downlink MU-MIMO and OFDMA. This module also includes features such as Target Wake Time (TWT), dual carrier modulation, extended range, and 802.11az accurate ranging.
Download Datasheet Product Details
OCXO
Ultra-Precision Double Oven OCXO from 4.096 to 10 MHz
OCXO  from Dynamic Engineers

The DOCXO5151AN01-HS from Dynamic Engineers is a Double Oven OCXO with output frequencies from 4.096 to 10 MHz. It provides a sinewave output waveform with a frequency stability vs. operating temperature of ±0.05 ppb and a phase noise of -155 dBc/Hz (at 10 kHz). This OCXO requires a DC supply of 12 V and consumes less than 1.5 A of current in warm-up mode and 350 mA in steady-state mode.
Download Datasheet Product Details
Noise Generator
40 GHz Programmable AWGN Noise Generator
Noise Generator  from Noisecom

The UFX7000B from Noisecom is a Programmable AWGN Noise Generator that can generate noise signals up to 40 GHz. It incorporates a broadband noise source and noise path attenuator (with a maximum attenuation range of 127 dB in 1 dB steps). This noise generator provides an output power of up to +30 dBm with excellent flatness.
Download Datasheet Product Details
RF Spectrum Analyzer
USB-Powered, Portable Real-Time Spectrum Analyzer from 10 MHz to 8 GHz
RF Spectrum Analyzer  from Aaronia AG

The SPECTRAN® V6 RSA500X from Aaronia AG is a Real-Time Spectrum Analyzer that operates from 10 MHz to 8 GHz. It incorporates a vector signal generator, has a real-time bandwidth of 120 MHz I/Q, and a probability of intercept (POI) of 97 ns (FFT-based)/10 ns (direct I/Q based). This analyzer can perform a complete scan up to 6 GHz in less than 5 ms with a sweep speed of up to 440 GHz/s.
Download Datasheet Product Details
Data Link
Tactical Data Link Radio for Link 16 Military Applications
Data Link  from BAE Systems

The TacNet™ from BAE Systems is a Tactical Data Link Radio for Link 16 networks. It supports single or dual antenna Tx and Rx and can deliver a selectable transmit power of 90 W, 50 W, and 1 W. This radio is built on a combat-proven tactical data link technology and features built-in growth capabilities, including Link 16 crypto modernization, enhanced throughput (ET), concurrent multi-netting, multi-channel capability, and high power capability.
Download Datasheet Product Details
RF Mixer
Bi-Directional RF Mixer from 7 to 40 GHz
RF Mixer  from RF-Lambda

The RMX07G40GA from RF-Lambda is a Bi-Directional Mixer that operates from 7 to 40 GHz. It has an input frequency (RF) from 7 to 40 GHz and an output frequency (IF) from DC to 10 GHz. It has a LO frequency of 7 to 40 GHz and an LO power of 14 dBm. This mixer has a conversion loss of 14 dB and provides isolation of 50 dB.
Download Datasheet Product Details
RF & Microwave Isolator
80 W Rugged RF Isolator from 8 to 12 GHz for Military Applications
RF & Microwave Isolator  from Smiths Interconnect

The IB800012000P300S from Smiths Interconnect is an RF Isolator that operates in the X-Band from 8 to 12 GHz. It provides more than 20 dB of isolation and has an insertion loss of less than 0.35 dB. This 50-ohm isolator can handle an average input power of 80 W, a peak input power of 300 W, and reverse power of up to 30 W.
Download Datasheet Product Details
Gain Equalizer
GaAs MMIC Equalizer from DC to 26 GHz
Gain Equalizer  from Marki Microwave

The MEQ6-26CSP1 from Marki Microwave is an Equalizer MMIC that operates from DC to 26 GHz. It can handle an input power of 2 W and has an insertion loss of 0.3 dB (@26 GHz). This equalizer provides a positive slope and is ideal for compensating low-pass filtering effects in RF/microwave and high-speed digital systems.
Download Datasheet Product Details
Waveguide Switch
Rugged Electro-Mechanical Waveguide Switches for Space Applications
Waveguide Switch  from Flann Microwave

The Series 330 from Flann Microwave are 2-Channel Waveguide Switches that operate up to 112 GHz. These electro-mechanical switches have been developed to meet the rapidly increasing data capacity requirements of space communication links. They have an H-plane orientation, low insertion loss, and high-power handling capacity with excellent PIM performance.
Download Datasheet Product Details
SATCOM Antenna
12-Inch Ku/Ka-Band Airborne Satellite Communication Terminal
SATCOM Antenna  from Orbit Communication Systems

The AirTRx 30Ka from Orbit is an Airborne Satellite Communication Terminal that operates at Ku-band or full ITU Ka-band frequencies. It delivers speeds of up to 130 Mbps and has been designed to work on LEO, MEO, HEO, and GEO satellite networks. This satellite terminal has a built-in, step-track-based Advanced Control Loop for superior performance and has two (2) LRUs – antenna and MODMAN.
Download Datasheet Product Details
RF Over Fiber Module
S/C/X-Band Microwave Photonic Transceivers from 2 to 12 GHz
RF Over Fiber Module  from Microwave Photonic Systems

The OFW-7820-TRX Series from Microwave Photonic Systems are S/C/X-Band Microwave Photonic Transceivers that operate from 2 to 12 GHz. These transceivers are part of an integrated earth terminal design intended to transmit and broadcast S/C/X-Band signal traffic using single mode fiber optic cabling over distances up to 100 km. They can either process direct X-band SATCOM or IF frequency signals that can be up-converted into the X-band spectrum.
Download Datasheet Product Details
RF Amplifier
Low Noise Amplifier from 37.5 to 42.5 GHz SATCOM Applications
RF Amplifier  from TTI

The LNA-Q-3742-A from TTI is a Low Noise Amplifier (LNA) that operates in the Q-band from 37.5 to 42.5 GHz. It provides a gain of 40 dB with a noise figure of less than 2.5 dB and an output P1dB of more than 15 dBm. This LNA has spurious levels of less than -60 dBc. It requires a DC supply from 12 to 24 V and consumes 75 mA of current (at 12 V).
Download Datasheet Product Details
SATCOM Transceiver
Ku-Band Transceivers from 10.95 to 14.50 GHz for VSAT Networks
SATCOM Transceiver  from Amplus Communication

The AM-9446 Series from Amplus Communication are high performance Ku-band Transceivers designed for use in SCPC, DAMA and TDMA VSAT satellite earth stations. They operate from 13.75 to 14.50 GHz (Tx) and 10.95 to 12.75 GHz (Rx). In the Tx mode, they provide an output power (P1dB) of 100 W with a gain of 70 dB and gain adjustment of 25 dB in 0.5 dB steps.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]