1. everything RF
  2. RF Newsletters
more
PREV 11 january, 2016 NEXT

Top RF Stories & White Papers this Week

11 Jan, 2016 - everything RF Newsletter
 
everything RF
Date: 11 Jan, 2016
 
Top Stories this Week
NXP Introduces the World’s Smallest 77 GHz Radar Transceiver - NXP Semiconductors
Start Up Raises $16.5 Million to Create Battery less Sensors for IOT - PsiKick
RFMW to Distribute Ampleon Products - Ampleon
SkyLiTE Front End Modules Target IoT Applications - Skyworks
60 GHz USB 3.0 802.11ad Reference Design Delivers Multi-Gigabit Speeds - SiBEAM
Sierra Wireless LTE-A Embedded Module to be Integrated in Lenovo Notebooks - Sierra Wireless
New Approved Tower Mounted Amplifier Makes Installation Easier - Westell Technologies
Low Power Wearable Chipset Combines Dual-Mode Bluetooth & GPS - MediaTek
High Performance, Low Cost CMOS RF Front-End ICs Target the IoT Market - RFaxis
Emite and R&S Collaborate on LTE Test Setup - Rohde & Schwarz
Innovative Antenna for Weather Satellites Tested in Hertz Chamber
Anadigics Receives Higher Buyout Offer - ANADIGICS
More News
New White Papers
WiFi Interface Identifier - RF Industries
Fundamentals of RF Solid State Cooking - NXP
Design, Optimization and Production of an Ultra-Wideband (UWB) Receiver - NI AWR
Testing S-Parameters on Pulsed Radar Power Amplifier Modules - Guerrilla RF
Filters for Dummies - Qorvo
More White Papers
Upcoming Events
Event Image
DesignCon 2016

Date: 19 to 21 Jan, 2016

Location: Santa Clara, United States

 
More Upcoming events
Top Connectors, Adapters and Cable Assemblies of 2015
RF Connector
SMPM and SMP RF Connectors Operate up to 65 GHz

RF Connector from MOLEX

The SMPM and SMP RF Connectors from MOLEX operate from DC to 65 GHz. They deliver high density and excellent frequency performance, and are ideal for compact applications which require a high level of optical density and have been designed for military and high-frequency applications.
 
Download Datasheet | Product Details
 
RF Connector
2.92 mm 40 GHz Connector Series

RF Connector from Santron

The S292 series of connectors from San-tron have been designed for RF/microwave, military and aerospace applications up to 40 GHz or in the K-band range. These high-performance coaxial connectors are designed to the 2.92 mm standard and offer a compatible mating style to Anritsu K Connectors, APC 3.5, SMA, WSMA, and 3.50 mm connectors.
 
Download Datasheet | Product Details
 
RF Connector
75 Ohms, SMB Bulkhead Jack Coaxial Connector

RF Connector from Amphenol RF

The 903-108J-71S from Amohenol RF is a 75 Ohm SMB coaxial connector that operates up to 10 GHz. It is matched to 75 Ohms and has a RG-179 cable group with an outer Crimp and inner Solder attachment. It is available with SMB Bulkhead Jack, Male pin.
 
Download Datasheet | Product Details
 
Between Series RF Adapter
Low PIM QMA to Connect with an N type Quick Mate Adapter

Between Series RF Adapter from RF Industries

The RQA-5478 from RF Industries is a low PIM between series adapter with a QMA female to N male interface. The adapter is manufactured with a machined brass body, plated in a durable tri-metal (white-bronze) finish. The contact is gold plated. The adapter is rated for low PIM performance of = -155 dBc using 2 tones at 20 watts.
 
Download Datasheet | Product Details
 
Between Series RF Adapter
Between Series Adapter for T&M (Custom Products available)

Between Series RF Adapter from MOLEX

Molex offers many types and styles of between series RF/Microwave adapters for test and measurement in the lab, as well as system bulkhead applications. The Between-Series Adapters provide transitions between popular coaxial connectors of differing interface (series).
 
Download Datasheet | Product Details
 
In Series RF Adapter
Low PIM Adapters from DC to 6 GHz

In Series RF Adapter from VidaRF

The ADP-3000 Series from Vida RF is a range of low PIM adapters that operate from DC to 6 GHz. They have a VSWR of 1.20:1 and a low PIM up to 165 dBc. These adapters are available in various connector configurations that include – SMA, N Type, SMB, 7/16, TNC Male and Female options.
 
Download Datasheet | Product Details
 
Between Series RF Adapter
Low PIM DIN Male to Type N Female Adapter up to 6 GHz

Between Series RF Adapter from HASCO Components

The MDP-NJ-SLP from HASCO is a low PIM DIN Male to Type N Female adapter. It can operate up to 6 GHz with a VSWR of 1.2:1. The adapter is matched to 50 Ohms and has a PIM less than -168 dBc (at 1800 MHz, 43 dBm per tone). It has a silver plated BeCu inner conductor and a PTFE dielectric.
 
Download Datasheet | Product Details
 
In Series RF Adapter
1.85mm Coaxial Adapters from DC to 67 GHz

In Series RF Adapter from KRYTAR

The Model 4030 from Krytar is a Female to Male 1.85mm coaxial adapter that operates from DC to 67 GHz. It can be used in a wide array of wireless communications applications, test equipment, and antenna devices for both commercial and military markets. It has a low VSWR of 1.25:1, an insertion loss up to 0.040*&radicf GHz and an RF leakage of less than -100 dB.
 
Download Datasheet | Product Details
 
Between Series RF Adapter
DC to 65 GHz NMD Adapter Series

Between Series RF Adapter from Response Microwave Inc

This series of NMD adaptors are available with N18, 3.5mm, 2.92mm, 2.4mm and 1.85mm interface options. The adapters can operate up to 65 GHz with an insertion loss up to 0.20 dB and a VSWR of 1.15:1. The adapters have a stainless steel body with gold plated BeCu center contacts.
 
Product Details
 
RF Connector
High-Security SMKey 3.7 mm DC to 18 GHz Keyed Connectors

RF Connector from Southwest Microwave

The SMKey Connectors from Southwest Microwave are high-security SMKey 3.7 mm DC to 18 GHz Keyed Coax Connectors, which provide a failsafe mating solution for critical connections between mated connector pairs. This connector assigns differing key positions for mating pairs within a set, eliminating the risk of interconnect mismatch.
 
Product Details
 
RF Connector
Board to Board Connector Interface from DC to 6 GHz

RF Connector from Amphenol Connex

The AFI connector series is a solution for board-to-board RF applications in the military and broadband marketplaces. The AFI interface utilizes a proprietary configuration that allows for industry leading “float” to compensate for the axial and radial misalignment due to packaging tolerances. This industry-leading float results in a maximum misalignment allowed by the system of .030” [0,8 mm] radial and .040” [1,0 mm] axial.
 
Download Datasheet | Product Details
 
RF Cable Assembly
RF & Microwave Cable Assemblies

RF Cable Assembly from MOLEX

Molex has a series of RF cable assemblies with a wide range of coaxial cable options such as standard RG braided cables, micro coax, semi-rigid cable, vendor specific custom cables, LMR types and hand conformable cables. These are available with multiple connector options which can be matched to either 50 ohms or 75 Ohms.
 
Download Datasheet | Product Details
 
RF Cable Assembly
50 GHz, High-Performance Ruggedized Cable Assemblies

RF Cable Assembly from Maury Microwave

Maury Microwave's Stability™ series are high-performance ruggedized microwave/RF cable assemblies. They have been designed specifically for phase-stable and amplitude-stable applications. The light weight, flexibility and small form factor make theses cable assemblies ideal for use with VNA's, test instruments, bench-top testing and ATE systems. The Stability™ series are now part of the ColorConnect™ family.
 
Download Datasheet | Product Details
 
RF Cable Assembly
Field Mountable DC to 18 GHz Robust, Lightweight Cable Assemblies

RF Cable Assembly from Huber+Suhner

The EACON field mountable microwave cable assemblies are lightweight and robust solutions that can be quickly and easily assembled on site. The assemblies operate up to 18 GHz and are ideal for the aviation and defence markets, where replacement of cables can be an issue.
 
Download Datasheet | Product Details
 
RF Cable Assembly
Low Loss Flexible Coaxial Test Cables from DC to 26.5 GHz

RF Cable Assembly from AtlanTecRF

The ACW-CA18 Series from AtlanTecRF is a range of coaxial test cables designed for general purpose laboratory and equipment applications from DC to 26.5 GHz. They have an insertion loss of 1.35 dB/m, a VSWR of 1.35:1 with an RF leakage of -90 dB. These test cables are matched to 50 Ohms and have a velocity of propagation up to 77%. They can withstand up to 2500 Vrms.
 
Download Datasheet | Product Details
 
RF Cable Assembly
18 GHz N Type Cable Assembly with Armored Jacket

RF Cable Assembly from API Technologies - Inmet

The iCALIBER N Type Cable Assembly Series from API Inmet is operate from DC to 18 GHz. This cable has an armored jacket with a bend radius of 4 inches. he assembly can handle up to 100 watts of power and can withstand up to 2500 Vrms. The cable has a bending radius of 4 inches. The N Type connectors are made of passivated stainless steel and are certified for use in military applications.
 
Download Datasheet | Product Details
 
RF Cable Assembly
Vapor-Sealed Durable Cable Assemblies up to 18 GHz

RF Cable Assembly from W. L. Gore & Associates

The GORE-FLIGHT Microwave Assemblies are vapor-sealed, durable cable solutions that operate up to 18 GHz. These assemblies have been designed for airborne electronic surveillance/counter measures, radar warning systems, navigation/communication systems and electronic/signal intelligence applications. They have an insertion loss up to 2.03 dB, time delay of 0.04 ns/cm and are matched to 50 Ohms.
 
Download Datasheet | Product Details
 
RF Cable Assembly
Low PIM Cable Assemblies for LTE, 4G and 5G Systems

RF Cable Assembly from Santron

The SRX Series of Cable Assemblies have been developed to address the low PIM requirements of cellular base station and in-building system designers who are working on LTE 4G and 5G systems. This series includes cabinet integration, short cable runs or jumper applications, long-haul cable runs, indoor use, outdoor use, riser, and plenum environments. Interconnect options include SMA, N, 7/16, TNC and mini-DIN (4.1/9.5) connectors.
 
Download Datasheet | Product Details
 
RF Cable Assembly
Low PIM Cable Jumpers with Formable Coax

RF Cable Assembly from Pasternack Enterprises Inc

These low PIM formable cables are made using a tin-filled braid that produces a hand formable, solid outer conductor wall, making them perfect for installation into tight places, operating from DC up to 6 GHz depending on the desired configuration.
 
Download Datasheet | Product Details
 
RF Connector
SMA and N-Type 6 GHz Coaxial Connectors

RF Connector from Amphenol Connex

This is a series of N Type & SMA Connectors from Amphenol Connex that operate up to 6 GHz. These connectors are matched to 50 ohms and are available in both male and female configurations.
 
Download Datasheet | Product Details
 
RF Cable Assembly
18 GHz Low Loss Cable Assemblies for Harsh Environments

RF Cable Assembly from EMC Technology & Florida RF Labs

The Lab-Flex®AF assemblies are qualified to meet the harsh environments found in commercial and military aircrafts, as well as shipboard and ground applications. They operate up to 18 GHz and are qualified to MIL-T-81490/MIL-STD-810 standards. The cable assemblies are constructed with a redundant water sealing system, and have been tested and proven hermetically sealed to 1 x 10-5 cm3/s.
 
Download Datasheet | Product Details
 
Trending Slideshow
Event Image
11 White Papers every Wireless Engineer Needs to Read
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.