PREV 5 April, 2023 NEXT

New RF and Microwave Products this Week

5 April, 2023 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 5 April, 2023
 
Sponsored by MPG Solutions
 
 
New RF and Microwave Products this Week
Probe Station & System
220 GHz Probe Station for On-Wafer Characterization of 5G/6G Devices
Probe Station & System  from FormFactor Inc.

The 220 GHz Broadband Solution from FormFactor is a Single-Sweep Probe Station for high-accuracy on-wafer measurements. It provides an excellent combination of dynamic range, output power, and stability for efficient broadband device modeling and characterization of on-wafer devices for next-generation 5G and future 6G technologies.
Download Datasheet Product Details
RF Amplifier
4-Port Full-Duplex Bi-Directional GaN Amplifier from 0.5 to 6 GHz
RF Amplifier  from NuWaves RF Solutions

The Xtender™ ULSC-20-C01-S01 from NuWaves is a 4-Port Full-Duplex Bi-Directional Amplifier that operates from 0.5 to 6 GHz. In Tx mode, this amplifier delivers a saturated output power of 20 W with a gain of 38 dB. In Rx mode, it provides a gain of 20 dB and has a noise of 5 dB. The amplifier is based on gallium nitride (GaN) technology and has over-voltage and reverse voltage protection features.
Download Datasheet Product Details
RF Amplifier
GaAs pHEMT Low Noise Gain Block from 17 to 23 GHz
RF Amplifier  from CML Microcircuits

The CMX90B701 from CML Microcircuits is a Gain Block that operates from 17 to 23 GHz. It provides a small signal gain of more than 17 dB with a noise figure of 4 dB and provides reverse isolation of more than 30 dB. This 50-ohm gain block is fabricated using a GaAs pHEMT process to provide optimum gain, linearity, and noise in a highly integrated to minimize external component count and board area.
Download Datasheet Product Details
RF Amplifier
1 W GaN Amplifier MMIC from 12.7 to 18 GHz
RF Amplifier  from Wolfspeed

The CMPA1D1J001S from Wolfspeed is a High-Power Amplifier MMIC that operates from 12.7 to 18 GHz. It delivers a saturated output power of 1 W (up to 31.5 dBm) with a large signal gain of 23 dB and a power-added efficiency of up to 35%. This amplifier utilizes Wolfspeed’s high performance, 0.15µm GaN on the SiC production process, and supports both radar and communication applications within both military and commercial markets.
Download Datasheet Product Details
RF Amplifier
2800 W GaN Pulsed Power Amplifier from 2.7 to 3.1 GHz
RF Amplifier  from RFHIC

The RRP27312k5-30 from RFHIC is a GaN Pulse Power Amplifier that operates from 2.7 to 3.1 GHz. It provides an output pulse power of 2800 W with a gain of 30 dB (±0.5 dB, max) and offers a high efficiency of 40%. This HEMT amplifier has a duty cycle of 5%, a pulse width of from 1 to 100 µs and a rise/fall time of less than 100 ns. It has been designed for radar applications.
Download Datasheet Product Details
Switch Matrix
Miniature RF Switch Matrix from DC to 40 GHz
Switch Matrix  from Teledyne Relays

The MMA Series from Teledyne Relays is an RF Switch Matrix that operates from DC to 40 GHz. It supports up to 4 SPDT switches which have a break before making the design. This 50-ohm switch matrix can be controlled via USB or Ethernet and requires a DC supply of 24 V. It is designed to allow remote operation via TCP/IP commands to the Matrix’s Ethernet interface.
Download Datasheet Product Details
Sponsored by MPG Solutions
MPG Solutions
RF & Microwave Advanced Solutions
MPG Solutions is a leading manufacturer of interference mitigation equipment, subsystems & integrated microwave assemblies, receivers, frequency converters, switch matrices, and switched filter banks for numerous applications. Click here to explore our advanced solutions and engineering capabilities. Click here to learn more.
RF Capacitor
High-Temperature Vertical Layer Capacitors from 1.0 to 1000 pF
RF Capacitor  from Quantic Eulex

The VH Series from Quantic Eulex are High-Temperature Vertical Layer Capacitors that are available in capacitance values from 1.0 to 1000 pF. They support wire bonding or epoxy die attach to the high-purity gold connector pads. They use Class I and Class II dielectrics for high-temperature application up to 300°C. The dielectric options include NPO or X7R dielectrics.
Download Datasheet Product Details
RF Monitoring Receiver
Man-Portable Interference Hunting and RF Monitoring Receiver from 9 kHz to 18 GHz
RF Monitoring Receiver  from CRFS

The RFeye StormCase from CRFS is a man-portable integrated system designed for easy mobile spectrum monitoring from a fully autonomous and ruggedized stand-alone unit that operates from 9 kHz to 18 GHz. It incorporates an RFeye Node 100-8 or 100-18, internal and external antenna ports, high-performance hot-swappable rechargeable MIL-SPEC battery and integrated 512 GB SSD memory for high-volume data collection during mobile field operations.
Download Datasheet Product Details
RF Test Set
Portable RF Spectrum Surveillance System from 9 kHz to 27 GHz
RF Test Set  from thinkRF

The thinkRF Spectrum Surveillance System is a continuous RF surveillance solution designed for in-place monitoring and bug detection in secure facilities. It provides continuous coverage across a frequency range from 9 kHz to 27 GHz. The solution can conduct full spectrum scans, distinguish between friendly and hostile signals, create databases and signal libraries, monitor the signal of interest, demodulate the signal if required and locate the source.
Download Datasheet Product Details
RF Spectrum Analyzer
Spectrum Analyzer Measuring Receiver from 1 Hz to 4.4 GHz
RF Spectrum Analyzer  from Signal Hound

The SA44B from Signal Hound is a Software Defined Radio (SDR) optimized RF Spectrum Analyzer that operates up to 4.4 GHz. It has a wide dynamic range from -151 to 10 dBm with a resolution bandwidth from 0.1 GHz to 250 kHz and 5 MHz. It is a compact, easy to use spectrum analyzer for use in the lab, by ham radio enthusiasts, and electronics hobbyists.
Download Datasheet Product Details
GPS/GNSS Disciplined Oscillator
Rugged Low-Noise Disciplined Rubidium Oscillator
GPS/GNSS Disciplined Oscillator  from Orolia

The Spectratime SRO-5680 from Orolia is a low noise Disciplined Rubidium Oscillator that integrates complex synchronization functionality in a low-cost, super-small package that is EMI-shielded and rugged. It utilizes Orolia’s SmarTiming+® technology to provide a host of integrated GPS/GNSS disciplining and timing features.
Download Datasheet Product Details
RF Cable Assembly
27 GHz Low-Profile Flexible Microwave Cable Assembly
RF Cable Assembly  from Times Microwave Systems

The InstaBend® IB-141 from Times Microwave Systems is a Flexible Microwave Cable Assembly that operates up to 27 GHz. This 50-ohm cable assembly is available in varying lengths and connector options and can be bent very closely behind the connector to simplify cable routing. It is ideal for both inside-the-box and between-box connections in applications including space flight, thermal vacuum, microwave tests, and many other commercial and military applications.
Download Datasheet Product Details
Sponsored by MPG Solutions
 
 
RF Cable Assembly
Flexible Cable Assembly with 1.85 mm Connectors from DC to 70 GHz
RF Cable Assembly  from HUBER+SUHNER

The SUCOFLEX 570E from HUBER+SUHNER is a Flexible Microwave Cable Assembly that operates from DC to 70 GHz. It is available with 1.85 mm connectors and is designed to provide an ideal solution for precise measurements in critical laboratory conditions. This 50-ohm cable assembly delivers phase stable and low loss performance and has a unique design that ensures zero spring back and facilitates efficient handling during measurement.
Download Datasheet Product Details
RF Cable Assembly
90 GHz Phase Stable, Customizable Flexible RF Cable Assembly
RF Cable Assembly  from ConductRF

The A33TFL from Conduct RF is a Flexible RF Cable Assembly that operates up to 90 GHz. It has an outer diameter of 0.056 inches and a minimum bend radius of 0.20 inches. This cable assembly utilizes a dielectric material that eliminates the PTFE knee phenomenon and provides a more linear change in phase with change in temperature.
Download Datasheet Product Details
RF Inductor
Square Air Core Inductors from 90 to 300 nH
RF Inductor  from Coilcraft

The 2222SQ Series from CoilCraft are Square Air Core Inductors with inductance values from 90 to 300 nH. They have a Q factor of up to 230 @400 MHz with very tight inductance tolerances, making them suitable for narrowband RF amplifier matching and tuning applications. These air-core inductors do not use a magnetic core, resulting in the high Q and the lowest possible losses for high-frequency applications.
Download Datasheet Product Details
RF Switch
32 GHz Surface-Mount Absorptive SPDT Switch
RF Switch  from ATEK MIDAS

The ATEK253N3 from ATEK MIDAS is an Absorptive SPDT Switch that operates up to 32 GHz. It has a switching time of less than 45 ns, an insertion loss of less than 3.3 dB, and provides more than 45 dB of isolation. This switch requires a control voltage of 0 / -5 V. It is available in a surface-mount package that measures 3 x 3 mm with RF input and outputs internally matched to 50 ohms.
Download Datasheet Product Details
Diplexer
Diplexer with Passbands from 14.4-14.93 GHz / 15.15-15.35 GHz for Military Applications
Diplexer  from MtronPTI

The UFDX9999-010 from MtronPTI is a Ku-Band Diplexer with a lower passband from 14.400-14.930 GHz and an upper passband from 15.150-15.350 GHz. It can handle a CW input power of 30 W and provides a channel-to-channel isolation of more than 70 dBc. This diplexer has a phase linearity of ±2° which enables it to support higher data transfer rates with low latency.
Download Datasheet Product Details
Multiplexer
Quad-Band Quadruplexer from 1985 to 2970 MHz
Multiplexer  from Anatech Electronics

The AM2000-2300-2620-2920QP179 from Anatech Electronics is a Quad Band Quadruplexer that operates from 1985 – 2015 MHz, 2285 – 2315 MHz, 2619 – 2621 MHz, and 2870 – 2970 MHz. It has an insertion loss of less than 5 dB and provides more than 50 dB of rejection from adjacent bands. This quadruplexer can handle an input power of up to 10 dBm and has a VSWR of less than 1.5:1.
Download Datasheet Product Details
Band Pass Filter
Cavity Bandpass Filter with Passband from 15.9 to 16.7 GHz
Band Pass Filter  from Mini Circuits

The ZVBP-16R3G-S+ from Mini-Circuits is a Cavity Bandpass Filter with a passband from 15.9 to 16.7 GHz. It can handle an input power of 15 W, has a passband insertion loss of less than 0.9 dB, and provides a stopband rejection of up to 58 dB. This BPF implements resonant structures with very high Q and can provide bandwidths as narrow as 0.5% with very high selectivity and excellent low noise floor.
Download Datasheet Product Details
RF Over Fiber Module
RF Over Fiber Module from 0.5 to 6000 MHz for DAS Applications
RF Over Fiber Module  from RFOptic

The RFoF-6GHz from RFOptic is an RF Over Fiber Module that operates from 0.5 to 6000 MHz. It has a low-noise amplifier and provides an adjustable link gain of 27 dB (0.5 dB step size) with a noise figure of 6 dB when the LNA is turned ON. This module utilizes RFOptic’s unique technology that overcomes the loss caused by coaxial infrastructure in terms of EVM and ACLR over a wide range of signal levels over long distances.
Download Datasheet Product Details
RF Tapper
200 W Power Tapper from 138 to 960 MHz for Public Safety DAS Applications
RF Tapper  from RF Industries

The RFPT-NF-PS6 from RF Industries is a Power Tapper that operates from 138 to 960 MHz. It can handle an input power of 200 W, has a split ratio of 4:1 and a PIM of less than -153 dBc (at 2x43 dBm tones). This power taper is available in an IP65-rated Aluminium module that measures 5.433 x 1.800 x 0.984 inches with N type (female) connectors and is designed for public safety DAS applications.
Download Datasheet Product Details
RF Amplifier
750 W, Rackmount Class-A SSPA from 80 to 1000 MHz for 5G/EMC Testing
RF Amplifier  from AR RF/Microwave Instrumentation

The 800W1000 from AR RF/Microwave Instrumentation is a Solid-State Power Amplifier (SSPA) that operates from 80 to 1000 MHz. It delivers an output power of more than 800 W (80 to 650 MHz) with a small signal gain of 64 dB and supports AM, FM, or Pulsed modulation. This Class A-based SSPA has spurious levels of -73 dBc and harmonic distortion of less than -20 dBc.
Download Datasheet Product Details
RF Module
Sub-GHz/2.4 GHz LoRa, FSK, and BLE 5.1 Combo Module for Amazon Sidewalk Applications
RF Module  from Quectel

The KG100S from Quectel is a Sub-GHz/2.4 GHz LoRa, FSK, and Bluetooth Low Energy (BLE) Combo Module that is designed for Amazon Sidewalk applications. It uses BLE for short-distance communication and LoRa and FSK radio protocols at 900 MHz frequencies to cover longer distances. This module includes an ARM Cortex-M33 processor (80 MHz), has a built-in SX1262 LoRa and FSK transceiver, and a microcontroller with a 2.4 GHz radio transceiver to support Bluetooth Low Energy 5.1 standards.
Download Datasheet Product Details
Wireless Charging Transmitter
5 W, WPC Qi 1.2.4 Monolithic Wireless Power Transmitter
Wireless Charging Transmitter  from STMicroelectronics

The STWBC86 from STMicroelectronics is a Monolithic Wireless Power Transmitter that is compatible with WPC Qi 1.2.4 specification. It delivers an output power of 5 W and supports robust ASK & FSK communication. This wireless power transmitter has a 32-bit, 64 MHz ARM Cortex micro-controller, 8 KB SRAM, 10-bit A/D converter, and on-chip current sense.
Download Datasheet Product Details
RF Transistor
2.5 kW, L-Band GaN Transistor for Directed Energy Applications
RF Transistor  from Integra Technologies, Inc.

The IGN1012S2500 from Integra Technologies is an RF Transistor that operates in the L-band. It delivers an output power of 2.5 kW and requires a DC supply of 100 V. This transistor utilizes Integra’s 3rd generation RF GaN technology that is optimized to deliver high power and efficiency in a single package while maintaining reliable operating junction temperatures.
Download Datasheet Product Details
GNSS Anti-Jamming Solution
5-Channel GPS Anti-Jam System for Ground and Marine Applications
GNSS Anti-Jamming Solution  from Mayflower Communications

The NavGuard 501® SAGE from Mayflower Communications is a GPS Anti-Jam System. It has a 5-channel design and provides simultaneous dual frequency (L1 and L2) GPS protection. This system has a 3.5-inch diameter FRPA footprint and is an affordable SWaP-C alternative to larger and more expensive existing anti-jam systems.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]