1. everything RF
  2. RF Newsletters
more
PREV 19 April, 2023 NEXT

New RF and Microwave Products this Week

19 April, 2023 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 19 April, 2023
 
Sponsored by Infinite Electronics
 
 
New RF and Microwave Products this Week
Frequency Synthesizer
USB-Powered 2-Channel Smart PLL Frequency Synthesizer from 45 MHz to 22.6 GHz
Frequency Synthesizer  from Z-COMM
The SSG22645LX from Z-Communications is a Smart PLL Frequency Synthesizer that generates frequencies from 45 MHz to 22.6 GHz. It has two independently-controlled output channels with a power range from -20 to +7dB and a phase noise of -117 dBc/Hz (@100 kHz offset). This synthesizer has 3 frequency sweep modes – single sweep, repeat sweep (continuous), and cycle sweep – each with frequency start/stop, step size, and dwell time.
Download Datasheet | Product Details
RF Switch
USB Controlled Absorptive SPDT RF Switch from 100 to 8000 MHz
RF Switch  from Vaunix
The LSW-802PDT from Vaunix is a USB Programmable Absorptive SPDT Solid-State RF Switch that operates from 100 to 8000 MHz. It has a switching speed of less than 50 ns and provides isolation of more than 90 dB. This switch can handle an input power of up to 35 dBm and has an insertion loss of less than 4.5 dB.
Download Datasheet | Product Details
RF Variable Attenuator
4-Channel, 95 dB USB-Powered Programmable Attenuator from 0.1 to 8 GHz
RF Variable Attenuator  from Spectrum Control
The 4400-8-95 from Spectrum Control is a 4-Channel Programmable Attenuator that operates from 0.1 to 8 GHz. It provides an attenuation range from 0 to 95 dB in 0.5 dB steps and has an attenuation switching time of 100 ns. The attenuation channels can be operated independently or in a synchronized fashion where all attenuators change simultaneously.
Download Datasheet | Product Details
Fixed Attenuator
Chip Attenuators from DC to 20 GHz
Fixed Attenuator  from Smiths Interconnect
The TS06 Series from Smiths Interconnect are Chip Attenuators that operate from DC to 20 GHz. They are available in attenuation values from 0 to 12 dB (in 1 dB increments), 15 dB, and 20 dB with an attenuation accuracy of ±1.00 dB. These attenuators can handle a CW input power of up to 3 W and have a temperature coefficient of attenuation of ±200 ppm/°C.
Download Datasheet | Product Details
Termination
1 kW RF Termination from DC to 3 GHz
Termination  from JFW Industries
The 50T-495 from JFW Industries is a High-Power RF Termination that operates from DC to 3 GHz. It can handle an average input power of 1000 W, peak input power of up to 4 kW (1 µs pulse width), and has a VSWR of less than 1.4:1. This 50-ohm termination is available in a module with N-type (male/female) or 7/16 (male/female) connector options.
Download Datasheet | Product Details
Power Divider
2 Way Resistive Power Divider from DC to 26.5 GHz
Power Divider  from MECA
The 802-3-13.250 from MECA is a 2-way resistive power divider that operates from DC to 26.5 GHz covering all bands from VHS thru X and the Ku band. It can handle up to 1 watt of power, has an insertion loss of under 8.5 dB and a VSWR of 1.40:1. The power divider is available in a module with 2.92mm connectors.
Download Datasheet | Product Details
Sponsored by Infinite Electronics
Fairview
Fairview Microwave’s New RF Power Dividers and RF Couplers
Fairview Microwave offers an innovative selection of in-stock RF power dividers and RF couplers for a variety of applications, including research labs, test and instrumentation, telecommunications, satellite communications, wireless communications and more. Click here to learn more.
Power Divider
10 W, 2-Way Power Divider from 10 to 65 GHz
Power Divider  from XMA Corporation
The OS6790-6065-02 from XMA Corporation is a 2-Way Power Divider that operates from 10 to 65 GHz. It can handle an input power of 10 W, provides more than 15 dB of isolation, and has an insertion loss of less than 4.5 dB. This 50-ohm power divider has an amplitude balance of ±1.5 dB and a phase balance of ±15°.
Download Datasheet | Product Details
Balun
Surface-Mount Ferrite Transformers from 150 kHz to 1200 MHz
Balun  from Coilcraft
The WBC Series from CoilCraft are Wideband Transformers with bandwidths from 150 kHz to 1200 MHz. They have an impedance ratio of up to 1:16 and an insertion loss of less than 2 dB. The transformers have a ferrite core and are available in tapped or untapped configurations. They can handle an input power of 0.25 W and have a current rating of up to 250 mA.
Download Datasheet | Product Details
Satellite Link Emulator
Advanced Satellite Link Emulator with 1 to 4 Channels
Satellite Link Emulator  from dBm Corporation
The ACE9600 from dBm Corp is Satellite Link Emulator for simulating satellite to fixed/mobile ground stations, satellite-to-satellite RF link testing and Satellite Payload Emulation. It has an instantaneous bandwidth of up to 600 MHz and is based on a powerful hardware/DSP test platform that allows a variety of impairments to be inserted in real-time, enabling testing of a range of wireless receivers, UHF/VHF Radios, satellite payloads and satellite fixed & mobile ground and airborne transceivers in a controlled laboratory environment.
Download Datasheet | Product Details
RF Amplifier
8 kW Pulsed Solid-State Power Amplifier from 2 to 4 GHz
RF Amplifier  from Exodus Advanced Communications
The AMP2136P-LC-8KW from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 2 to 4 GHz. It delivers a pulsed output power of 8 kW (pulse width up to 100 µs, max. duty cycle 6%) with more than 69 dB of power gain. This Class AB amplifier utilizes an advanced high-power linear design and has built-in protection circuits with extensive monitoring of critical parameters such as voltage, current, noise voltage, reflected power, and VSWR.
Download Datasheet | Product Details
RF Amplifier
1kW Solid State Broadband High Power Amplifier from 1 to 3 GHz
RF Amplifier  from Empower RF
The BBS4A6AUT (SKU 2170) from Empower RF is a high power amplifier module which operates from 1 to 3 GHz. It provides up to 1000 Watts of CW power, 500 Watts of P1dB with a gain of 63 dB. The amplifier is ideal for signals with CW, AM, FM and pulse modulation. The BBS4A6AUT (Model 2170) provides excellent performance for end applications that include, but are not limited to, test and measurement, electronic warfare, and communications.
Download Datasheet | Product Details
RF Amplifier
Solid State Low Noise Amplifier from 0.25 to 35 GHz
RF Amplifier  from Quantic PMI (Planar Monolithics)
The PEAFS3-14-0R2535R0-6R5-23-12-292FF from Planar Monolithics Industries is a Low-Noise Amplifier that operates from 0.25 to 35 GHz. It provides 14 dB of gain with a noise figure of 6.5 dB and has a P1dB of more than 23 dBm. The LNA includes internal voltage regulation and provides unconditional stability. It requires a DC supply from 12 to 15 V and draws less than 300 mA of current.
Download Datasheet | Product Details
Sponsored by Infinite Electronics
 
 
RF Spectrum Analyzer
USB-Powered Real-Time Spectrum Analyzer from 9 kHz to 6 GHz
RF Spectrum Analyzer  from Signal Hound
The BB60D from Signal Hound is a Spectrum Analyzer that operates from 9 kHz to 6 GHz. It streams 140 MB/sec of digitized RF signals to a PC over the USB 3.0 interface, providing an instantaneous bandwidth of 27 MHz, and sweeping at speeds of 24 GHz/sec. This analyzer performs spectrum analysis using the proprietary application programming interface (API) which can execute up to 1.2 million FFT spectrums or 320 million FFT points every second, delivering real-time spectrum data.
Download Datasheet | Product Details
RF Spectrum Analyzer
Handheld RF Spectrum Analyzer from 9 kHz to 4 / 6 GHz with Real-Time Option
RF Spectrum Analyzer  from Anritsu
The Field Master™ MS2080A from Anritsu is a Handheld RF Spectrum Analyzer that operates from 9 kHz to 4 / 6 GHz. It has an integrated spectrum analyzer, an optional real-time spectrum analyzer (RTSA), a cable and antenna analyzer, and an LTE/5G base station tester. This analyzer has a full span sweep speed of 45 GHz/s, a DANL of -160 dBm DANL, and a phase noise of -95 dBc/Hz @ 100 kHz offset (1 GHz frequency).
Download Datasheet | Product Details
RF Amplifier
Dual Bi-Directional Solid-State Power Amplifier from 2.2 to 2.5 GHz
RF Amplifier  from Triad RF Systems
The TTRM2005D from Triad RF Systems is a Dual Bi-Directional Solid-State Power Amplifier that operates from 2.2 to 2.5 GHz. This class AB amplifier uses the latest LDMOS transistor technology to achieve highly linear power with low distortion, or peak power at high efficiencies to meet any radio system's requirements. On the Tx side, it delivers 25 dB of gain, while on the Rx side, it has a P1dB of 5 dBm with a gain of 12 dB and has a noise figure of less than 2.5 dB.
Download Datasheet | Product Details
RF Amplifier
Low Noise Amplifier MMIC from 4 to 8 GHz for 5G Base Stations
RF Amplifier  from AmpliTech
The AGLNA0408 from AmpliTech is a Low Noise Amplifier (LNA) MMIC that operates from 4 to 8 GHz. It delivers a saturated output power of 12 dBm with a gain of 26.5 dB and has a noise figure of 0.9 dB. This LNA requires a DC supply of +5 V and consumes 25 mA of current. It is available as a 50-ohm internally matched die that measures 1.75 x 1.25 x 0.10 mm.
Download Datasheet | Product Details
RF Amplifier
60 W GaN Power Amplifier MMIC from 5.2 to 5.9 GHz
RF Amplifier  from Wolfspeed
The CMPA5259050D1 from Wolfspeed is a Power Amplifier MMIC that operates from 5.2 to 5.9 GHz. It delivers a CW/Pulsed output power of 60 W with a large signal gain of 23 dB and a small signal gain of 30 dB. This amplifier MMIC is based on Wolfspeed’s 0.15 µm GaN-on-SiC production process and has a power-added efficiency of 50%. It requires a DC supply of 28 V and consumes 500 mA of current.
Download Datasheet | Product Details
Beamforming IC
High-Accuracy Beamforming IC from 26.5 to 29.5 GHz for 5G-NR Applications
Beamforming IC  from iCana
The ICAMB2629-A from iCana is a Beamforming IC that operates from 26.5 to 29.5 GHz covering the 5G-NR FR2 bands n257 and n261. It features 8 configurable transmit and receive channels (4 horizontal and 4 vertical polarized) and supports a signal bandwidth of 800 MHz. This IC has an amplitude accuracy of ±0.05 dB and a phase accuracy of ±2.5°.
Download Datasheet | Product Details
Power Sensor
Real-Time Peak USB Power Sensors from 50 MHz to 40 GHz
Power Sensor  from Boonton
The RTP5000 Series of USB Power Sensors from Boonton are Real-Time peak power sensors that operate from 50 MHz to 40 GHz (available in 6 GHz, 18 GHz and 40 GHz configurations). They have a dynamic range from -60 dBm to +20 dBm with a measurement rate of 100,000 measurements per second, with no gaps in signal acquisition and zero measurement latency.
Download Datasheet | Product Details
RF Shielded Test Enclosure
RF Shielded Test Enclosure for 802.11 a/b/g/n/ac, Bluetooth, RFID and 3G Device Testing
RF Shielded Test Enclosure  from RF Electronics
The HDRF-2124-T from RF Electronics is a RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. It has a thick RF absorbing foam that provides an isolation of more than 90 dB. It has shielded power filters for providing power connection in the box while blocking all wireless signals. The HDRF-2124-T has a number of I/O connector options that include HDMI, RJ45, USB, DB9, VGA, DB25 and AC/DC.
Download Datasheet | Product Details
Voltage Controlled Oscillator
Voltage Controlled Oscillator from 1400 to 2650 MHz
Voltage Controlled Oscillator  from Dynamic Engineers
The VCO1212BQ-1400MHz-2650MHz-A from Dynamic Engineers is a Voltage Controlled Oscillator that operates from 1400 to 2650 MHz. It provides an output power of 6.5 dBm with a phase noise of -112 dBc/Hz and a 2nd harmonics suppression of -12 dBc. This oscillator has a tuning voltage range from 0 to 22 V with a tuning sensitivity from 30 to 130 MHz/V.
Download Datasheet | Product Details
DRO
10 GHz Surface-Mount Dielectric Resonator Oscillator
DRO  from Synergy Microwave Corporation
The GSDRO1000-8XT from Synergy Microwave Corporation is a Dielectric Resonator Oscillator that operates at 10 GHz. It provides an output power of more than 3 dBm with a phase noise of -168 dBc/Hz (@10 MHz offset) and provides a harmonics suppression of 28 dBc. This oscillator has a tuning voltage range (DC) from 1 to 15 V and a tuning sensitivity of 0.35 MHz/V.
Download Datasheet | Product Details
Down Converter
Low-SWaP Single-Channel Downconverter from 0.5 to 26.5 GHz
Down Converter  from Mercury Systems
The TAC-3290 from Mercury Systems is a Single-Channel Downconverter that converts an input frequency from 0.5 – 26.5 GHz (extendable to 44 GHz) to an IF output frequency from 500 – 4500 MHz. It has selectable bandwidths that support fast tuning for a broad spectrum of signals, enabling user operation closer to the source of the signal of interest, offering flexibility and adaptability in the field.
Download Datasheet | Product Details
Data Link
IP Data Links from 4.4 to 5 GHz for Hypersonic Airborne Applications
Data Link  from BERTEN
The P4700 Series from BERTEN are Airborne-Qualified IP Data Links that operate in the NATO Band IV from 4400 to 5000 MHz. They have been designed to provide a compact, robust, and affordable solution for tactical communications in electronic warfare (EW) environments. These transceivers implement unique frequency offset compensation algorithms that keep communication performance at hypersonic speeds of up to Mach 5 (more than 6000 km/h).
Download Datasheet | Product Details
RF Connector
12 GHz Micro-Coax RF Connector
RF Connector  from I-PEX
The MHF® 4L LK from I-PEX is a Micro-coaxial RF Connector that operates up to 12 GHz. This micro-coax connector clicks into place seamlessly and is designed to keep signals connected through constant shock and vibration. It utilizes I-PEX’s patented locking mechanism for improved connection reliability and security and works with MHF 4/4L receptacles.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Indsutry. We provide the latest news, information on new product releases, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]