New RF and Microwave Products this Week |
|
|
Low-Noise, High-Speed DAC Interface IC from 3 to 16 GHz |
RF Amplifier
from mmTron Inc
|
The TMC160 from mmTron is a DAC Interface IC that operates from 3 to 16 GHz. It amplifies and converts the differential output of a high-speed DAC to a clean, low-noise, single-ended signal to drive the RF chain of a transmitter. This IC integrates anti-alias lowpass filtering, low noise amplification, and a balun that converts the differential DAC output to a single-ended 50-ohm output compatible with traditional RF signal chains. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sponsored by Fairview Microwave | | |
|
|
|
|
|
|
|
|
|
|
24 to 40 GHz RF Downconverter for 5G Frequencies |
Down Converter
from ThinkRF
|
The D4000 from thinkRF is an RF Downconverter/Tuner that downconverts an Input RF signal from 24 - 40 GHz to an output IF signal with a frequency of 1.536 GHz. It has a 500 MHz real-time bandwidth, and a 100 kHz tuning resolution, making it ideal for applications such as interference hunting, electronic warfare, signals intelligence, spectrum monitoring, RF drive test, transmission test, and customer premise equipment test. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
Inner DC Block from 7 kHz to 23 GHz |
DC Block
from Inmet by Spectrum Control
|
The 8535 from Spectrum Control is an Inner DC Block that operates from 7 kHz to 23 GHz. It has a DC voltage rating of up to 100 V, a VSWR of less than 1.35:1, and an insertion loss of less than 0.75 dB. This 50-ohm DC block has a capacitor in series with both the center conductor which prevents the flow of audio and direct current (DC) frequencies while offering minimum interference to RF signals. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
Sponsored by Fairview Microwave | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bluetooth 5.2 Wireless Module for Industrial/Medical Applications |
RF Module
from Murata
|
The Type 2EG from Murata is a Bluetooth 5.2 Wireless Module for connected IoT edge devices in industrial and medical applications. It is based on Onsemi’s RSL15 SoC and has a built-in ARM Cortex M33 core with 80 kB RAM (including 64 kB user RAM) and 512 kB Flash. This module has an integrated IoT cybersecurity platform and supports Bluetooth’s higher throughput, increased broadcast capacity, improved channel co-existence algorithm (SCA), and long range and proximity features. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Vehicular Software Defined Radio from 30 to 512 MHz/1 to 1.8 GHz |
Software Defined Radio
from Elbit Systems
|
The E-LynX™ Vehicular MP from Elbit Systems is a Software Defined Radio (SDR) that operates from 30 to 512 MHz and 1 to 1.8 GHz. It is based on the SCA 2.2.2 architecture, supports FM, BPSK, GMSK, PSK, and QAM modulation schemes, and has a bandwidth of up to 4 MHz. In Tx mode, this SDR delivers an output power of 50 W, has spurious emissions of -80 dBc, harmonic emissions of better than -60 dBc, and includes open and short-circuit protection. |
|
Download Datasheet
Product Details | |
|
|
|
|
|