1. everything RF
  2. RF Newsletters
more
PREV 7 June, 2023 NEXT

New RF and Microwave Products this Week

7 June, 2023 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 7 June, 2023
 
Sponsored by Mouser
 
 
New RF and Microwave Products this Week .
RF Amplifier
100 W Ka-Band GaN Solid-State Power Amplifier from 18 to 40 GHz
RF Amplifier  from Qorvo

The QPB2040N from Qorvo is a Solid-State Amplifier that operates in the Ka-Band from 18 to 40 GHz. It delivers a saturated output power of 50 dBm (100 W) with a power gain of 11 dB and has a power-added efficiency of 9.8%. This GaN amplifier is based on Qorvo’s patented and field-proven Spatium combining technology that provides unprecedented Solid-State Power Amplifier (SSPA) performance in a rugged, compact, and lightweight package.
Download Datasheet Product Details
RF Amplifier
mmWave Low-Noise Amplifier MMIC from 15 to 45 GHz
RF Amplifier  from Mini Circuits

The PMA3-15453+ from Mini-Circuits is a Low-Noise Amplifier MMIC that operates from 15 to 45 GHz. It provides a gain of up to 18.9 dB with a noise figure of 3.2 dB and has a P1dB of 17 dBm. This LNA offers a unique combination of high dynamic range and low noise figure over a very broad bandwidth making it ideal for use in a wide variety of transmitter and receiver applications.
Download Datasheet Product Details
RF Transistor
8 W GaN HEMT from DC to 15 GHz
RF Transistor  from Wolfspeed

The CGHV1F006S from Wolfspeed is an unmatched, GaN HEMT that operates from DC to 15 GHz. The HEMT can be used for L, S, C, X and Ku-band amplifier applications. It provides 8 watts of output power with 15 dB of gain at 9 GHz. The transistor operates on a 40-volt rail circuit and is available in a 3 x 4 mm, surface-mount, dual-flat-no-lead (DFN) package.
Download Datasheet Product Details
Fixed Attenuator
0 to 10 dB Fixed Attenuator MMICs from DC to 67 GHz
Fixed Attenuator  from Marki Microwave

The ATNXX-0067CH from Marki Microwave are Fixed Attenuators that operate from DC to 67 GHz. They are available in attenuation values from 0 to 10 dB with 1 dB steps and can handle an input power of up to 2 W. These GaAs attenuators are available as wire bondable dies that measure 0.60 x 0.60 mm and are ideal for attenuating signals in a wide range of applications such as test equipment protection and signal overload prevention in RF systems.
Download Datasheet Product Details
RF Cable Assembly
50 GHz Multi-Coax Solution for Coaxial-to-PCB Transitions
RF Cable Assembly  from HUBER+SUHNER

The MXP50 Series from Huber+Suhner are multi-coax cable assemblies for coaxial-to-PCB Transitions up to 50 GHz. These assemblies are available in 1x8 and 2x8 Configurations with highly flexible and stable cables. They have standard phase matching of +/- 2 ps and are available with MXP to 2.4 mm and MXP to MXP connection interfaces.
Download Datasheet Product Details
Waveguide Combiner / Divider
1.6 kW, 16-Way Waveguide Power Combiner from 2.4 to 2.5 GHz
Waveguide Combiner / Divider  from RFHIC

The RIW2425-AB010 from RFHIC is a 16-Way Power Combiner that operates from 2.4 to 2.5 GHz. It can handle a CW input power of up to 1.6 kW (at each port), has 57 dB of coupling and an insertion loss of less than 0.3 dB. This S-band combiner has an amplitude balance of ±0.3 dB and a phase balance of ±5°.
Download Datasheet Product Details
Sponsored by Mouser
Mouser
Level translator and power supply board with FMC-compatible form factor
Analog Devices Inc. AD-FMCXMWBR1-EBZ Board Kit is powered by the FMC connector, with the possibility of adding an external supply for applications requiring higher load currents. The external supply is prioritized. Click here to learn more.
RF Test Set
Modular Signalling Test Solution for 5G FR1 and FR2
RF Test Set  from LitePoint

The IQcell-5G from LitePoint is a 5G FR1/FR2 Signalling Test Solution that is designed for end-of-line manufacturing, software regression and functional performance testing. It validates RF parametric measurements, end-to-end throughput, MIMO, mobility, and user experience testing across cellular and cellular-capable connectivity devices such as smartphones, CPE’s, laptops, tablets, hotspots, etc.
Download Datasheet Product Details
Noise Generator
40 GHz Programmable AWGN Noise Generator
Noise Generator  from Noisecom

The UFX7000B from Noisecom is a Programmable AWGN Noise Generator that can generate noise signals up to 40 GHz. It incorporates a broadband noise source and noise path attenuator (with a maximum attenuation range of 127 dB in 1 dB steps). This noise generator provides an output power of up to +30 dBm with excellent flatness.
Download Datasheet Product Details
Direction Finding System
Dual-Channel Direction Finding and Spectrum Monitoring System from 9 kHz to 18 GHz
Direction Finding System  from CRFS

The RFeye Array 300 Series from CRFS is an intermediate-sized spectrum monitoring and direction-finding system for vehicle-mounted deployment or fixed installations. The Array 300 uses a unique multi-layer approach that is more sophisticated and versatile than traditional direction finding. High-performance spiral directional antenna modules are optimized for different frequency bands and arranged in multiple orientations.
Download Datasheet Product Details
RF Amplifier
700 W GaN Power Amplifier from 900 to 930 MHz
RF Amplifier  from MACOM

The MAPC-A1508 from MACOM is a Power Amplifier that operates from 900 to 930 MHz. It delivers a saturated output power of 700 W (~58.46 dBm) with a small signal gain of 20.1 dB and a drain efficiency of 67.1%. This amplifier is manufactured using a gallium-nitride (GaN) on silicon carbide (SiC) D-mode HEMT and supports both CW and pulsed operation.
Download Datasheet Product Details
RF Amplifier
125 W Class-A Solid-State Power Amplifier from 80 to 1000 MHz
RF Amplifier  from AR RF/Microwave Instrumentation

The Model 125W1000A from AR RF/Microwave Instrumentation is a Solid-State Power Amplifier that operates from 80 to 1000 MHz. It delivers an output power of more than 125 W with a small signal gain of 57 dB. This class-A amplifier is 100% mismatch tolerant and has built-in fault monitoring & protection from input overdrive beyond 0 dBm as well as protection from various failure conditions including over-temperature and power supply faults.
Download Datasheet Product Details
Termination
100 W, Bolt Down RF Termination from DC to 3 GHz
Termination  from JFW Industries

The 50T-686 from JFW Industries is an RF Termination that operates from DC to 3 GHz. It can handle an average input power of 100 W, a peak input power of 1000 W (1-microsecond pulse), and has a VSWR of less than 1.15:1. This termination has an operating temperature range from -55°C to +125°C, is conduction-cooled and must be mounted to a heatsink or cooling plate.
Download Datasheet Product Details
Sponsored by Mouser
 
 
RF Inductor
Low Profile Chip Inductors from 1.2 to 56 nH
RF Inductor  from Coilcraft

The 0402CT Series from Coilcraft are Chip Inductors with a self-resonant frequency up to 27.5 GHz. These low-profile inductors are available in 23 inductance values ranging from 1.2 to 56 nH. They have an excellent Q factor performance (84) at 2.4 GHz, high current handling capability of 2.3 A, and a maximum DCR of 1250 mohms.
Download Datasheet Product Details
RF Amplifier
40 dB Low Noise Amplifier from 500 MHz to 40 GHz
RF Amplifier  from Quantic PMI (Planar Monolithics)

The PEC-42-500M40G-20-12-292MF-BG from Quantic PMI is a Low Noise Amplifier that operates from 500 MHz to 40 GHz. It provides 40 dB of gain with a noise figure of 5.5 dB and has a saturated output power of +23 dBm. This amplifier requires a DC supply of 12 / 15 V and consumes 450 mA of current. It is available in a module that measures 1.37 x 1.00 x 0.60 inches and has 2.92 mm (male/female) connectors.
Download Datasheet Product Details
RF Amplifier
Low Noise Cryogenic Amplifier from 6 to 8.5 GHz
RF Amplifier  from AmpliTech

The APTC3-06000850-2K00-D2-V from AmpliTech is a Low Noise Cryogenic Amplifier that operates from 6.0 to 8.5 GHz. It has been designed for cryogenic applications down to 4K, with an industry-low Noise Figure of 25K at +296K and 2K at 4K case temperatures across the band. It provides more than 40 dB of gain with a noise figure of less than 0.029 dB (at 4 K) and has a P1dB of -6 dBm.
Download Datasheet Product Details
Probe Station & System
Autonomous Wafer Probing System for RF and mmWave Measurements
Probe Station & System  from FormFactor Inc.

The Autonomous RF Measurement Assistant from FormFactor enables autonomous RF and mm-Wave Measurements and calibrations on 200 mm and 300 mm wafer probe stations. The Autonomous RF Measurement Assistant allows less experienced operators to perform an RF calibration up to 500 GHz by simply pushing a button.
Download Datasheet Product Details
RF Shielded Test Enclosure
Small RF Shield Box for Mobile Phone Testing
RF Shielded Test Enclosure  from LabiFix Innovations

The LBX500 from Labifix is a Small RF Shielded Test Enclosure for Cellular, Bluetooth, ZigBee, WiMAX and other smaller wireless devices. It has high-performance RF absorber lining and provides shielding effectiveness of more than 80 dB (at 6 GHz). This test enclosure has a rugged welded construction with an interior dimension of 4.0 x 6.0 x 9.0 inches.
Download Datasheet Product Details
RF Amplifier
Optical Modulator Driver Amplifier from 50 kHz to 47 GHz
RF Amplifier  from AT Microwave

The AT-BBLF-0047-2720D from AT Microwave is a Broadband Amplifier that operates from 50 kHz to 47 GHz. It delivers a saturated output power of +21 dBm with a small signal gain of 27 dB and has a phase delay of 330 ps. It requires a single DC supply of +8 V and consumes less than 320 mA of current. This amplifier can be used both as a power amplifier and a low-noise amplifier.
Download Datasheet Product Details
RF Module
Automotive Grade Long-Range Bluetooth 5.3 LE Modules
RF Module  from u-blox AG

The NINA-B50 Series from u-blox are Bluetooth 5.3 LE Modules with support for Thread, Zigbee, and Matter that have been developed for automotive applications. These modules provide an output power of up to 10 dBm and have a maximum range of 1400 m. They have an internal PCB antenna that provides high performance and an extensive range or a module pin for an external antenna.
Download Datasheet Product Details
Front End Module
5G-NR mmWave Antenna Module from 24.25 to 43.5 GHz
Front End Module  from Qualcomm

The QTM545 from Qualcomm is a 5G-NR mmWave Antenna Module that operates from 24.25 to 43.5 GHz covering global 5G mmWave bands. It has a bandwidth of up to 1000 MHz and utilizes performance enhancement technologies like dual-layer polarization in downlink and uplink (mmWave), beam tracking (mmWave), beam forming (mmWave), and beam steering (mmWave).
Download Datasheet Product Details
Cellular Module
5G RedCap Modules backward Compatible with LTE Cat 4 Networks
Cellular Module  from Fibocom

The FG132-NA Series from Fibocom are 5G RedCap Modules that are backward compatible with LTE Cat 4 networks. They support a downlink data speed of 220 Mbps and an uplink data speed of 100 Mbps. These modules are compliant with 3GPP Release-17 and support 5G standalone architecture along with 5G slicing.
Download Datasheet Product Details
RF Transceiver
Sub-1 GHz RF Transceiver for Wi-SUN IoT Applications
RF Transceiver  from Renesas

The R9A06G062GNP from Renesas is an RF Transceiver that operates in the sub-1 GHz bands from 863 to 928 MHz. It supports OFDM and FSK modulations compliant with IEEE802.15.4-2020 and Wi-SUN FAN1.1 profiles. The OFDM modulation provides high-speed and robust communication for IoT devices, while FSK modulation ensures compatibility with the conventional FAN1.0 profile.
Download Datasheet Product Details
90 Degree Hybrid Coupler
50 W Quadrature Hybrid Coupler from 2 to 8 GHz
90 Degree Hybrid Coupler  from Innovative Power Products

The IPP-7093 from Innovative Power Products is a Quadrature Hybrid Coupler that operates from 2000 to 8000 MHz. It can handle an input power of 50 W, provides more than 15 dB of isolation, and has an insertion loss of less than 0.8 dB. This coupler has an amplitude balance of ±0.65 dB and a phase balance of ±8°.
Download Datasheet Product Details
180 Degree Hybrid Coupler
150 W, 180° RF Hybrid Combiner/Divider from 2 to 6 GHz
180 Degree Hybrid Coupler  from Werlatone Inc

The H12489 from Werlatone is a 180° RF Hybrid Combiner/Divider that operates from 2000 to 6000 MHz. It can handle a CW input power of 150 W, provides more than 20 dB of isolation, and has an insertion loss of less than 0.65 dB. This combiner/divider has a phase balance of 180° (±8°) and a maximum amplitude balance of ±0.4 dB.
Download Datasheet Product Details
RF Switch
Reflective SPDT Switch MMIC from DC to 12 GHz
RF Switch  from SuperApex Corporation

The SAC3203AQ3 from SAC Superapex is an SPDT Switch MMIC that operates from DC to 12 GHz. It has a switching speed of 30 ns and provides 48 dB of isolation. This reflective switch can handle an input power of up to 30 dBm and has an insertion loss of less than 1.4 dB. It operates using complementary positive control voltage logic lines of 0/+5V.
Download Datasheet Product Details
Wireless Charging Transmitter
50 W, WPC Qi 1.3.x-Compliant Wireless Charging Transmitter IC
Wireless Charging Transmitter  from Infineon Technologies

The WLC1150-68LQXQT from Infineon Technologies is a Wireless Charging Transmitter IC that is compatible with the WPC Qi 1.3.x specifications. It uses Infineon’s high-power proprietary protocol mode to deliver an output power of up to 50 W and supports robust ASK/FSK communication. This transmitter IC consists of a built-in microcontroller with integrated ARM Cortex-M0 Core 128 KB flash, 16 KB SRAM, and 32 KB ROM.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, inforamtion on new product releases, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]