PREV 21 June, 2023 NEXT

New RF and Microwave Products this Week

21 June, 2023 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 21 June, 2023
 
Sponsored by Fairview Microwave
 
 
New RF and Microwave Products this Week .
RF Spectrum Analyzer
Portable, USB-Powered Real-time Spectrum Analyzer from 100 kHz to 14.5 GHz
RF Spectrum Analyzer  from Signal Hound
The SP145 from Signal Hound is a Real-time Spectrum Analyzer with a frequency range from 100 kHz to 14.5 GHz. It has a sweep speed of 200 GHz/s, a streaming bandwidth of 40 MHz, and a display noise average (DANL) of -160 dBm. This RTSA has been designed for accurate remote spectrum monitoring and analysis and has an internal GPS module for conducting enhanced field measurements.
Download Datasheet | Product Details
RF Monitoring Receiver
Man-Portable Interference Hunting and RF Monitoring Receiver from 9 kHz to 18 GHz
RF Monitoring Receiver  from CRFS
The RFeye StormCase from CRFS is a man-portable integrated system designed for easy mobile spectrum monitoring from a fully autonomous and ruggedized stand-alone unit that operates from 9 kHz to 18 GHz. It incorporates an RFeye Node 100-8 or 100-18, internal and external antenna ports, high-performance hot-swappable rechargeable MIL-SPEC battery and integrated 512 GB SSD memory for high-volume data collection during mobile field operations.
Download Datasheet | Product Details
Voltage Controlled Oscillator
Hermetically-Sealed InGaP VCO MMIC from 13.32 to 15.20 GHz
Voltage Controlled Oscillator  from Teledyne e2v HiRel Electronics
The TDVCO015 from Teledyne e2V Hirel Electronics is an InGaP Voltage Controlled Oscillator (VCO) MMIC with a frequency range of 13.32 to 15.20 GHz. It provides an output power of +10 dBm with a phase noise of -115 dBc/Hz. This Heterojunction Bipolar Transistor (HBT) VCO has a monolithic structure and integrates resonators, negative resistance devices, and varactor diodes.
Download Datasheet | Product Details
Receiver
Single-Channel Front-End Receiver Module from 2 to 5 GHz
Receiver  from Tagore Technology
The TSL8029N from Tagore Technology is a Front-End Receiver Module that operates from 2 to 5 GHz. This single-channel front-end integrates a cascaded 2-stage low noise amplifier (LNA) and a GaN-based SPDT switch. In high gain mode, the cascaded 2-stage LNA and switch provide a gain of 33 dB with a noise figure of 1.4 dB. In low gain mode, it switches one stage of the LNA to bypass mode and provides a gain of 14 dB.
Download Datasheet | Product Details
RF Connector
1x8 Ganged SMT PCB Connector from DC to 50 GHz
RF Connector  from HUBER+SUHNER
The 1x8A_81_MXP-S50-0-3/111_N from HUBER+SUHNER is a 1x8 Ganged SMT PCB Connector that operates from DC to 50 GHz. It has a Copper Beryllium center contact and a brass body. This 50-ohm connector has an MXP interface, which can withstand 500 mating cycles and has an operating temperature range from -55°C to +85°C.
Download Datasheet | Product Details
RF Amplifier
GaAs pHEMT Low Noise Amplifier MMIC from 3.5 to 8.2 GHz
RF Amplifier  from AmpliTech
The AGLNA035082 from AmpliTech is a pHEMT Low Noise Amplifier (LNA) MMIC that operates from 3.5 to 8.2 GHz. It provides 26.5 dB of gain with a noise figure of 0.9 dB and has a saturated output power of 12 dBm. This LNA requires a DC supply of +5 V and consumes 25 mA of current. It is available as a 50-ohm internally matched die that measures 1.75 x 1.25 x 0.10 mm.
Download Datasheet | Product Details
Sponsored by Fairview Microwave
Fairview
Fairview Microwave’s New RF Power Dividers and RF Couplers
Fairview Microwave offers an innovative selection of in-stock RF power dividers and RF couplers for a variety of applications, including research labs, test and instrumentation, telecommunications, satellite communications, wireless communications and more. Click here to learn more.
RF Amplifier
Surface-Mount Low-Noise Amplifier from 400 to 6000 MHz
RF Amplifier  from Skyworks Solutions
The SKY67189-396LF from Skyworks is a Low-Noise Amplifier that operates from 400 to 6000 MHz. It provides a gain of up to 18 dB with a noise figure of less than 1.17 dB and has an output P1dB of 19.2 dBm. This amplifier provides reverse isolation of up to 30.5 dB and includes internal active bias circuitry that provides stable performance over temperature and process variation.
Download Datasheet | Product Details
RF Over Fiber Module
RF Over Fiber Module from 0.5 to 6000 MHz for DAS Applications
RF Over Fiber Module  from RFOptic
The RFoF-6GHz from RFOptic is an RF Over Fiber Module that operates from 0.5 to 6000 MHz. This module utilizes RFOptic’s unique technology that overcomes the loss caused by coaxial infrastructure in terms of EVM and ACLR over a wide range of signal levels over long distances. The RFoF-6GHz can be monitored and controlled remotely through HTML/REST/SNMP or a USB interface and includes end-to-end build-in diagnostic reducing installation and maintenance time.
Download Datasheet | Product Details
Board Level EMI/RFI Shielding Can
1- or 2-Piece EMI/RFI Shields for High-Frequency Applications
Board Level EMI/RFI Shielding Can  from Masach Tech
The MS102-10 Series from Masach are Drawn-Seamless EMI/RFI Shields for high-frequency RF applications. They are available in 1 or 2-piece configurations made with tin-plated steel or nickel-silver material. The Nickel-Silver series have high corrosion resistance and are used in sensitive-harsh environments in a variety of industries such as medical devices, aerospace, automotive, etc.
Download Datasheet | Product Details
RF Amplifier
10 W GaAs FET Solid State Power Amplifier from 26.5 to 40 GHz
RF Amplifier  from Advanced Amplifiers
The AA-2640G-10 from Advanced Amplifiers is a Solid-State Power Amplifier that operates from 26.5 to 40 GHz. It delivers an output power of 10 W with a power gain of more than 40 dB. This class AB linear amplifier is based on GaAs FET transistors and is suitable for all single-channel modulation standards. It has spurious emissions of -60 dBc and harmonics of less than -20 dBc.
Download Datasheet | Product Details
RF Amplifier
2 kW Class-A Solid-State Power Amplifier from 80 to 1000 MHz
RF Amplifier  from AR RF/Microwave Instrumentation
The Model 2000W1000E from AR RF/Microwave Instrumentation is a Solid-State Power Amplifier that operates from 80 to 1000 MHz. It delivers an output power of more than 2000 W with a gain of 69 dB and supports AM, FM, or pulse modulations. This class-A amplifier is 100% mismatch tolerant and has built-in fault monitoring & protection from input overdrive beyond 0 dBm as well as protection from various failure conditions including over-temperature and power supply faults.
Download Datasheet | Product Details
RF Shielded Test Enclosure
RF Shielded Test Box for EMC Testing from 20 MHz to 6 GHz
RF Shielded Test Enclosure  from RF Electronics
The HDRF-6U60-B1 from RF Electronics is a RF Shielded Test Box that operates from 20 MHz to 6 GHz. It has a thick RF absorbing foam that provides isolation of more than 130 dB which attenuates standing waves and reflections. The RF Test box is equipped with shielded power filters for power connections in the box while still blocking all wireless signals.
Download Datasheet | Product Details
Sponsored by Fairview Microwave
 
 
RF Variable Attenuator
Assembly with Two Solid-State Programmable Attenuator from 200 to 7125 MHz
RF Variable Attenuator  from JFW Industries
The 50BA-057-95 from JFW Industries is a Benchtop Attenuator Assembly with two solid state attenuators that operate from 200 to 7125 MHz. Each attenuator has an attenuation range from 0 to 95 dB (1 dB steps) with an insertion loss of less than 10.7 dB. They can handle up to +33 dBm of average input power, have a VSWR of less than 2.20:1 and a switching speed of 4 µs.
Download Datasheet | Product Details
Power Divider
30 W, 2 Way Power Divider from 6 to 40 GHz
Power Divider  from MECA
The 802-3-23.000 from MECA is a 2 Way Power Divider that operates from 6 to 40 GHz. The power divider has an insertion loss of under 1.8 dB and isolation of 22 dB. It can handle up to 30 watts of average power. It is available in a module with 2.92 mm connectors.
Download Datasheet | Product Details
Probe Station & System
Autonomous Wafer Probing System for RF and mmWave Measurements
Probe Station & System  from FormFactor Inc.
The Autonomous RF Measurement Assistant from FormFactor enables autonomous RF and mm-Wave Measurements and calibrations on 200 mm and 300 mm wafer probe stations. The Autonomous RF Measurement Assistant allows less experienced operators to perform an RF calibration up to 500 GHz by simply pushing a button.
Download Datasheet | Product Details
RF Inductor
Low Profile Wire-wound Ferrite Chip Inductors from 20 to 560 nH
RF Inductor  from Coilcraft
The 0402FL Series from Coilcraft are Wire-wound Ferrite Chip Inductors with inductance values from 20 to 560 nH. These chip inductors have a low profile of 0.55 mm, which is 10% lower than competitive inductors. They were developed for cellular applications for use either as filter elements, as one-pole filters, or as RF chokes in the cellular bands, and are great for use in mobile and infrastructure equipment.
Download Datasheet | Product Details
Radar Transponder
500 W IFF Transponder for SWaP-C Constrained Military Applications
Radar Transponder  from BAE Systems
The AN/DPX-7 from BAE Systems is an Identification Friend or Foe (IFF) Transponder that is designed to identify and track aircraft, ships, and other ground forces. It incorporates an ADS-B passive-receive capability to support situational awareness and sense-and-avoid applications. This transponder provides Mode 5, Mode S, and ADS-B functionality in a reduced-size unit at a lower cost than current military transponders, making it suitable for size, weight, and power (SWaP) constraint applications.
Download Datasheet | Product Details
RF Capacitor
Vertical Layer Capacitors with X5R/X7R Dielectric Options
RF Capacitor  from Quantic Eulex
The XV Series from Quantic Eulex are Vertical Layer Capacitors with high-purity gold conductors for wire bonding, solder, or epoxy die attach to high-purity gold connector pads. Class II dielectric in a range of sizes suitable for mounting in IC packages or on strip-line. These capacitors have a high frequency response and are available in small sizes.
Download Datasheet | Product Details
DLVA
Successive Detector Log Video Amplifier from 4 to 8 GHz
DLVA  from Quantic PMI (Planar Monolithics)
The GMDA-S4080-60 from Quantic PMI is a Successive Detection Log Video Amplifier (SDLVA) that operates from 4 to 8 GHz. It has a video log range from -55 dBm to +5 dBm, a tangential signal sensitivity (TSS) of better than -60 dBm, and a video bandwidth of 33 MHz. This SDLVA has a slope of 25 mV/dB, a rise time of less than 30 ns, and a fall time of less than 80 ns.
Download Datasheet | Product Details
RF Cable
Triaxial Cable with 3-Layers of Shielding from DC to 10 GHz
RF Cable  from IntelliConnect
The RG403 from IntelliConnect is a Triaxial Cable that operates from DC to 10 GHz. It has a silver-coated copper-clad steel conductor with a diameter of 0.012 inches and a polytetrafluoroethylene (PTFE) dielectric with a diameter of 0.033 inches. Triaxial cables were developed primarily to reduce noise levels in systems along with providing an isolated ground.
Download Datasheet | Product Details
GPS/GNSS Disciplined Oscillator
Compact, Low Cost, Low Noise GPS/GNSS Disciplined Rubidium Oscillator
GPS/GNSS Disciplined Oscillator  from Safran Electronics & Defense
The LNRClok-1500 from Safran is compact, smart, low cost, low noise GPS/GNSS-disciplined Rubidium oscillator (GPSDO) with an optional integrated GPS / GNSS receiver. This 10 MHz Disciplined Rubidium Oscillator delivers a sine wave output with a phase noise of -145 dBc/Hz at 1 kHz offset, has harmonics of less than -40 dBc and spurious levels of below -80 dBc.
Download Datasheet | Product Details
OCXO
Rugged 100 MHz Vibration-Compensated Sinewave OCXO
OCXO  from MtronPTI
The XO5503 from MtronPTI is an Oven-Controlled Crystal Oscillator (OCXO) that operates at 100 MHz. It provides a sinewave output with an output power of up to +9 dBm and has a frequency stability of ±100 ppb. This OCXO has an SSB phase noise of -162 dBc/Hz (at 10 kHz offset) and harmonics of -60 dBc. It incorporates an SC-cut Quartz resonator and an electronic vibration compensation that achieve a g-sensitivity of 0.02 ppb/g.
Download Datasheet | Product Details
Cellular Module
2.5 Gbps Sub-6 GHz 5G NSA+SA Cellular Module for eMBB and IoT Applications
Cellular Module  from Quectel
The RM500Q-GL from Quectel is a Sub-6 GHz Cellular 5G Module that is optimized for global (except USA) IoT and eMBB applications. It is based on 3GPP Release 15 technology and supports both SA and NSA 5G modes. This module delivers a 5G downlink data rate of up to 2.5 Gbps (NSA) and an uplink data rate of 650 Mbps (NSA).
Download Datasheet | Product Details
RF Transceiver
Low Power Sub-1 GHz Transceiver for Global IoT Applications
RF Transceiver  from STMicroelectronics
The S2-LP from STMicroelectronics is a Sub-1 GHz Transceiver that operates in the license-free ISM bands and SRD frequency bands of 433, 512, 868, and 920 MHz. It can also be programmed to support additional frequencies from 413-479 MHz, 452-527 MHz, 826-958 MHz, and 904-1055 MHz. This transceiver supports 2(G)FSK, 4(G)FSK, OOK, and ASK modulation schemes and can be used in systems with channel spacing down to 1 kHz.
Download Datasheet | Product Details
RF Variable Attenuator
2 W Temperature-variable Chip Attenuators from DC to 12 GHz
RF Variable Attenuator  from Spectrum Control
The TCAF N05 Series are temperature-variable chip attenuators that operate from DC to 12 GHz. The attenuators are designed to vary by -0.005 dB/dB/Degree C to compensate for temperature-induced system gain variation without requiring a bias or control voltage. They offer the flattest broadband performance of their kind and will allow you to create automatic and passive link margin compensation on a variety of transmit- and receive-chain circuits.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, inforamtion on new product releases, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]