1. everything RF
  2. RF Newsletters
more
PREV 28 June, 2023 NEXT

New RF and Microwave Products this Week

28 June, 2023 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 28 June, 2023
 
Sponsored by MPG Solutions
 
 
New RF and Microwave Products this Week .
RF Module
Surface-Mount mmWave RF Antenna Module from 26.5 to 29.5 GHz
RF Module  from Murata

The Type 1QT from Murata is an RF Antenna Module that operates from 26.5 to 29.5 GHz. This mmWave 5G-NR module has an EIRP of 36 dBm (400MHz CP-OFDM, -27dB EVM) and an Rx noise figure of less than 4.5 dB. It includes 16 (4×4) array antennas with dual polarization and has a scan angle of ±60°. This antenna module supports 5G NR by operating in combination with general FPGA and provides better RF performance by independently developed LTCC.
Download Datasheet Product Details
Beamforming IC
Dual-Polarized 2-Beam, 4-Element Beamformer IC from 17.7 to 21.2 GHz
Beamforming IC  from Analog Devices

The ADAR3002 from Analog Devices is a Beamformer IC that operates from 17.7 to 21.2 GHz. This dual-polarized, dual-beam, 4-element dual-polarized beamforming IC is designed for phased array antennas. In each of the 16 RF channels, it provides an adjustable gain of 31 dB (in 0.5 dB steps) and a phase adjustment of 360° (in 5.625° steps) via Variable Amplitude and Phase (VAP) blocks.
Download Datasheet Product Details
GNSS Module
Multi-Band, Multi-Constellation GNSS Module with Centimeter-Level Accuracy
GNSS Module  from u-blox AG

The NEO-F9P from u-blox is a Multiband GNSS Module that is suitable for high-volume industrial applications. It supports concurrent reception of GPS, GLONASS, Galileo, and BeiDou constellations and has integrated u-blox multi-band RTK technology for centimeter-level accuracy. This L1/L5 Band module has a 184-channel receiver which is powered by u-blox F9 engine.
Download Datasheet Product Details
Wireless SoC
Sub-GHz Wireless + 2.4 GHz Bluetooth LE SoC for IoT Applications
Wireless SoC  from Silicon Labs

The EFR32FG28 from Silicon Labs is a Sub-GHz Wireless + 2.4 GHz Bluetooth LE SoC that is designed for IoT applications. This SoC has a 32-bit 78 MHz ARM Cortex-M33 MCU with DSP instruction and a floating-point unit for efficient signal processing, up to 1024 kB flash program memory and up to 256 kB RAM data memory.
Download Datasheet Product Details
RF Amplifier
1 W E-Band GaN Power Amplifier MMIC from 65 to 76 GHz
RF Amplifier  from Nxbeam Inc

The NPA7000-DE from Nxbeam is a Power Amplifier MMIC that operates in the E-band from 65 to 76 GHz. It delivers a saturated output power of 1 W with a linear gain of 13 dB and a power-added efficiency (PAE) of up to 32%. This amplifier is developed on a 0.09um GaN HEMT on the SiC process and requires a drain supply from 10 to 20 V.
Download Datasheet Product Details
Voltage Controlled Oscillator
Voltage Controlled Oscillator from 1400 to 2650 MHz
Voltage Controlled Oscillator  from Dynamic Engineers

The VCO1212BQ-1400MHz-2650MHz-A from Dynamic Engineers is a Voltage Controlled Oscillator that operates from 1400 to 2650 MHz. It provides an output power of 6.5 dBm with a phase noise of -112 dBc/Hz and a 2nd harmonics suppression of -12 dBc. This oscillator has a tuning voltage range from 0 to 22 V with a tuning sensitivity from 30 to 130 MHz/V.
Download Datasheet Product Details
Sponsored by MPG Solutions
MPG Solutions
Cutting-Edge RF & Microwave Subsystems
MPG Solutions leverages the latest technologies in RF, microwave, and mixed-signal technology to provide customized solutions into numerous applications in the Defense, Aerospace, Space, Communications, ATE, and GPS markets. Click here to learn more.
PLDRO
Rugged 9 GHz Phase Locked Oscillator
PLDRO  from Z-COMM

The FSG9000LX from Z-Communications is a Phase Locked Oscillator (PLO) that operates a 9000 MHz. It provides 15 dBm of output power with a phase noise of -120 dBc/Hz (@100 kHz offset) and has a harmonic suppression of -35 dBc. This PLO requires a DC supply of 15 V and consumes 150 mA of current. It is available in a rugged enclosure that is suitable for in-field use as well as bench-top testing.
Download Datasheet Product Details
RF Amplifier
750 W Solid State Amplifier System from 1 to 6 GHz
RF Amplifier  from AR RF/Microwave Instrumentation

The 750S1G6C from AR RF/Microwave Instrumentation is a Solid-State Amplifier System that operates from 1 to 6 GHz. This class A amplifier delivers a saturated output power of more than 750 W from 1 to 4.2 GHz and 500 W from 4.2 to 6 GHz. It is immune to input overdrive above 0 dBm (up to 13 dBm), power supply faults, and over-temperature, and has protection against other failure conditions as well.
Download Datasheet Product Details
PXI Co-processor
COTS PXIe/CPCIe Embedded GPU Module for Test & Measurement and Electronic Warfare
PXI Co-processor  from RADX Technologies

The Trifecta-GPU™ from RADX Technologies is a COTS PXIe GPU Module for advanced graphics and GPU-accelerated signal processing, ML and DL inference applications. It is based on the NVIDIA® RTX A2000 GPU with 2,560 CUDA cores, 20 RT cores and 80 TENSOR cores. This module delivers a peak FP32 performance of 8.3 TFLOPS (22.7x PXIe-7915 @ 410 GFLOPS), includes 8 GB of GDDR6 on-board memory with a bandwidth of 192 GB/sec.
Download Datasheet Product Details
RF Amplifier
4 KW Pulsed SSPA from 1 to 2 GHz
RF Amplifier  from Exodus Advanced Communications

The AMP2043P-4KW from Exodus Advanced Communications is a Solid-State Pulsed Power Amplifier that operates from 1 to 2 GHz. It delivers a saturated pulsed output power of more than 4 kW with a gain of over 66 dB. The amplifier has a pulse width of up to 100 usec, 6% duty cycle and rise/fall time of less than 50 ns.
Download Datasheet Product Details
Probe Station & System
200 mm Manual Probe Station & System for mmWave, THz and Load-Pull Applications
Probe Station & System  from FormFactor Inc.

The EPS200MMW from FormFactor Inc. is a 200 mm Manual Probe Station & System that is designed for mmW, THz and load-pull applications at 67 GHz and beyond. This solution can be tailored to address measurement needs for active and passive components through the terahertz frequency range. It has a high dynamic range and directivity without compromising electrical accuracy or mechanical stability.
Download Datasheet Product Details
Radar Transponder
Identification, Friend, or Foe (IFF) System for Avionic and Marine Applications
Radar Transponder  from Leonardo DRS

The M425 from Leonardo is an Identification, Friend, or Foe (IFF) System that is designed for all applications including avionic (fixed or rotary wings) and ships. It has a fully solid-state and modular construction to facilitate maintenance. This system transmits replies on two RF connectors to provide full diversity operation which is supported by a receive section that provides two matched channels.
Download Datasheet Product Details
Sponsored by MPG Solutions
 
 
Data Link
Single-Channel Compact Data Link from 30 to 870 MHz for Mission Critical Communications
Data Link  from L3Harris Technologies

The RF300M-DL from L3Harris is Small Secure Data Link (SSDL) System that operates from 30 to 520 MHz, 762 to 870 MHz (Narrowband), and from 225 to 450 MHz (Wideband). This single-channel system is based on AN/PRC-152/152A Falcon III® technology and features multiband and multi-mode capabilities. It delivers mission-critical, ground-to-ground, air-to-ground, and air-to-air communications, with reliable voice, data, and video.
Download Datasheet Product Details
Software Defined Radio
SOSA-Aligned Multi-Channel Transceiver from 1 MHz to 6 GHz for SIGINT/EW Platforms
Software Defined Radio  from Epiq Solutions

The Sidekiq™ VPX400 from Epiq Solutions is a Multi-Channel, Phase-Coherent RF Transceiver that operates from 1 MHz to 6 GHz. It supports 4 phase-coherent channels with an instant bandwidth (IBW) of 200 MHz or 2 phase-coherent channels which are independently tunable at 450 MHz. This transceiver aligns with the SOSA™ technical standard for rapid adaptability and supports VITA 67.3 for RF I/O through the backplane.
Download Datasheet Product Details
RF Amplifier
Rugged 50 W Power Amplifier from 115 to 420 MHz for LOS Radios
RF Amplifier  from General Dynamics Mission Systems

The UPA-55 from General Dynamics is an RF Power Amplifier that operates from 115 to 174 MHz (VHF) and 225 to 420 MHz (UHF). It delivers an output power of up to 50 W in AM, FM, FSK, or continuous wave (CW) modulations. This amplifier has been designed to operate in extremely challenging LOS environments on land, in the air, and at sea and is able to withstand humidity, fungus, altitude, shock, dropping, and vibration with an average Mean-Time-Between-Failure (MTBF) rate of 10,000 hours.
Download Datasheet Product Details
RF Cable
Triaxial Cable with 3-Layers of Shielding from DC to 10 GHz
RF Cable  from IntelliConnect

The RG403 from IntelliConnect is a Triaxial Cable that operates from DC to 10 GHz. It has a silver-coated copper-clad steel conductor with a diameter of 0.012 inches and a polytetrafluoroethylene (PTFE) dielectric with a diameter of 0.033 inches. Triaxial cables were developed primarily to reduce noise levels in systems along with providing an isolated ground.
Download Datasheet Product Details
RF Cable
50 GHz Low-Loss Ruggedized Cable Assembly with Armoring Option
RF Cable  from Teledyne Storm Microwave

The dB Miser™ 130 from Teledyne Storm Microwave is a Cable Assembly that operates up to 50 GHz. It has a diameter of 3.23 mm and a minimum bend radius of 15.9 mm (static) and 31.8 mm (dynamic). This cable assembly has increased thermal stability, reduced leakage, and meets the challenging system gain or signal-to-noise requirements.
Download Datasheet Product Details
Software
Software for Analyzing Matching Networks and Corporate Feed Networks in Wireless Devices
Software  from Remcom

The XFdtd EM Simulation Software from Remcom includes several innovations that simplify matching network design, including a schematic editor specially designed for analyzing matching networks and corporate feed networks. The schematic editor visually characterizes the impact of a matching network design on even the most complex antenna systems and includes tuning slider bars that enable the manipulation of inductor and capacitor values in real time.
Download Datasheet Product Details
RF Monitoring Receiver
RF Monitoring Receiver from 9 kHz to 8 GHz for Spectrum Regulators
RF Monitoring Receiver  from CRFS

The RFeye Node 40-8 from CRFS is a Purpose-Built RF Receiver for spectrum regulators from 9 kHz to 8 GHz with an instantaneous bandwidth of 40 MHz. It combines high performance spectrum monitoring with a rugged form factor at an affordable price. This receiver provides real-time spectrum operations and is low in Size, Weight, and Power (SWaP) making it easy to deploy where it is needed.
Download Datasheet Product Details
Choke
AEC-Q200 Qualified Power Injection Chokes for Power-over-Coax Applications
Choke  from Coilcraft

The 1210PoC Series from Coilcraft are Power Injection Chokes that are designed for AEC-Q200 power over coax (PoC) applications. They have a ferrite core and maintain high impedance (= 1kOhm) over a wide frequency range to isolate AC signal from the DC power. These chokes have an operating temperature range from -40°C to +125°C.
Download Datasheet Product Details
Power Divider
2-Way Power Divider from 0.5 to 6 GHz
Power Divider  from Werbel Microwave

The D-2066 from Werbel Microwave is a 2-Way Power Divider that operates from 0.5 to 6 GHz. It can handle a maximum CW input power of up to 50 W, has an insertion loss of less than 1.1 dB, and provides more than 23 dB of isolation. This power divider has a phase balance of ±6° and an amplitude balance of ±0.5 dB.
Download Datasheet Product Details
RF Variable Attenuator
70 dB Variable Step Attenuator from DC to 2.2 GHz
RF Variable Attenuator  from MECA

The 680-70-1 from MECA is a Variable Step Attenuator that operates from DC to 2.2 GHz. It has an attenuation range of 0 to 70 dB in 10 dB steps (manually controlled via a knob) and an insertion loss of under 0.5 dB. The attenuator can handle an average input power of 2 W, and a peak input power of 1 kW with a VSWR of less than 1.4:1.
Download Datasheet Product Details
RF Shielded Test Enclosure
Bench-Top RF Shield Test Box from 20 MHz to 12 GHz
RF Shielded Test Enclosure  from RF Electronics

The HDRF-3170-J from RF Electronics is an RF Shield Test Box that is designed for the frequency range from 20 MHz to 12 GHz. It has thick RF-absorbing foam that deadens standing waves and reflections. This test box has shielded power filters for powering devices placed inside the box while blocking all wireless signals.
Download Datasheet Product Details
Waveguide Attenuator
Ethernet-Controlled 60 dB Programmable Attenuators from 6.5 to 500 GHz
Waveguide Attenuator  from Flann Microwave

The 625-03 Series from Flann Microwave are Ethernet-Controlled Precision Programmable Attenuators that operate from 6.5 to 500 GHz. They can handle an input power of up to 6 W, provide an attenuation range from 0 to 60 dB and have an insertion loss of less than 5 dB. These attenuators utilize the proven rotary vane principle and Flann’s industry-standard experience to offer very good performance.
Download Datasheet Product Details
RF Amplifier
GaAs/GaN Hybrid Power Doubler Amplifier Module from 45 to 1795 MHz
RF Amplifier  from Qorvo

The QPA3314 from Qorvo is a Hybrid Power Doubler Amplifier Module that operates from 45 to 1795 MHz. It uses GaAs/GaN dies to provide a gain of 23 dB with exceptional linearity and return loss performance with low noise and optimal reliability. This amplifier requires a DC supply of 24 V and consumes 520 mA of current. It is available in a SOT-115J package and is ideal for DOCSIS 4.0 CATV nodes and DOSIS 4.0 amplifiers applications.
Download Datasheet Product Details
Vector Network Analyzer
2-Port, 43.5 GHz Portable VNAs for Measurements Over Longer Distances
Vector Network Analyzer  from Anritsu

The ME786xA from Anritsu are Distributed Modular 2-Port Vector Network Analyzers that operate from 1 MHz to 43.5 GHz. They have a unique configuration with two 1-port MS46131A VNAs that are synchronized together to form fully reversing VNAs. Using the patented PhaseLync synchronization technology, the 1-port VNAs are phase synchronized over a distance of up to 100 meters to enable full 2-port vector S-parameter measurements.
Download Datasheet Product Details
Noise Generator
Programmable AWGN Noise Generators from 10 MHz to 3 GHz
Noise Generator  from Boonton

The NGX1000 Series from Boonton are Programmable Noise Generators that operate from 10 MHz to 3 GHz. They generate additive white gaussian noise (AWGN) with an output power of 0/+10 dBm and have a noise attenuation range from 0 to 127 dB in 0.1 dB steps. These noise generators can be controlled manually via a 5-inch touchscreen display or remotely via Ethernet.
Download Datasheet Product Details
EMI Receiver
EMI Test Receiver from 1 Hz to 44 GHz for EMC Compliance Testing
EMI Receiver  from Keysight Technologies

The N9048B from Keysight Technologies is a standards-compliant EMI test receiver equipped with an RF pre-selector and LNA designs. It has been developed to shorten the overall test time and easily perform gapless signal capture and analysis with real-time scan (RTS) capabilities. This EMI Test Receiver and diagnostic signal analyzer operate from 1 Hz to 44 GHz.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]