PREV 3 July, 2023 NEXT

Latest News & White Papers this Week

3 July, 2023 Newsletter - everything RF

Top stories this week. View it in your browser

 
Weekly Edition
Date: 3 July, 2023
 
Sponsored by Mouser Electronics
 
 
Latest News this Week
Ansys Adds New High-Frequency EM Capabilities for Early-Stage Antenna Design for IoT and 5G Applications - ANSYS
Samsung Foundry Adopts Keysight's RF Device Model Generator to Accelerate Creation of Circuit Libraries - Keysight Technologies
Smiths Interconnect Introduces Surface-Mount Resistive and Wilkinson Power Dividers from DC to 50 GHz - Smiths Interconnect
Amplitech Introduces New 5G Open Radio Unit for Sub-6 GHz Applications - AmpliTech
Ardent Introduces New Solderless, Compression-Mount Multi-Coax Connector that Operates up to 90 GHz - Ardent Concepts
Guerrilla RF Unveils Cutting-Edge High Gain Drivers to Revolutionize 5G mMIMO Applications - Guerrilla RF
Pivotal Commware Partners with MTN for Successful 5G mmWave Field Trial, Advancing Connectivity in Africa - Pivotal Commware
Times Microwave Systems Launches M8M™ Multiport Contacts for Military Applications - Times Microwave Systems
PPM Partners with Allen Vanguard and Plextek to Develop Remote Radio Head Technology for Countering IEDs - PPM Systems
Murata Introduces Advanced Ultrasonic Sensor for Automotive Applications - Murata
Advantest, NXP, and ASU Develop First-of-its-Kind RF Test Engineering Course - NXP Semiconductors
Kymeta’s Electronically Steered Flat Panel LEO Terminal to Serve on OneWeb’s Network for Maritime Applications - Kymeta
More News
Sponsored by Mouser Electronics
amphenol-rf
Full 4G LTE band antenna with SMA/RP-SMA connector for indoor applications
Amphenol RF External Antennas are intended to mate with a broad range of RF connector interfaces or be mounted directly to a PCB. These versatile antennas connect to familiar interfaces such as SMA, RP-SMA, and N-Type and are available in single, dual, and wide-band configurations. Click here to learn more.
New White Papers & Articles
Overcoming Common Planar Phased Array Circuit Design Challenges - Analog Devices
Reduced Capabilities (RedCap): A New Class of 5G Device - Rohde & Schwarz
5G Enhancement with Millimeter Wave Development - 5GMF
6G Ambience Intelligent - MediaTek
Cost-effective Front-end Components for X- and Ku-Band Phased Array Radar - Altum RF
More Whitepapers
Upcoming Event
Event Image
EMC+SIPI 2023
Date: 31 July to 4 August, 2023
Location: Grand Rapids, Michigan, USA
More Events
Featured Products this Week .
RF Amplifier
50 W GaN-on-SiC Power Amplifier from 1 to 3 GHz
RF Amplifier  from RFHIC

The RWP20050-1H from RFHIC is a GaN-on-SiC Power Amplifier that operates from 1000 to 3000 MHz. It delivers an output power of 50 W (~47 dBm) with more than 35 dB of gain and has an ON/OFF switching time of less than 5 µs. This amplifier requires a DC supply of 32 V and consumes 1.2 A of current. It is available in a module that measures 72.0 x 50.8 x 16.8 mm and has SMA-female input/output connectors.
Download Datasheet Product Details
OCXO
Low-Power OCXO from 30 to 300 MHz
OCXO  from Dynamic Engineers

The OCXO3322AW02 from Dynamic Engineers is an Oven Controlled Crystal Oscillator (OCXO) that operates from 30 to 300 MHz. It provides a sine wave or HCMOS output with a frequency stability of ±10 ppb and an SSB phase noise of -158 dBc/Hz (@ 10 kHz offset). This OCXO requires a DC supply of 3.3/5 V and consumes less than 230 mW of steady-state power.
Download Datasheet Product Details
RF Inductor
Mini Air-Core Inductors from 2.5 to 62 nH
RF Inductor  from Coilcraft

The 1512SP Series from Coilcraft are Air-core inductors with inductance values from 2.5 to 62.0 nH. They have DC resistances from 1.0 to 15.5 mOhm and offer percentage tolerances of 1, 5, 2 and 10 %. The inductors have a Q-factor of more than 80 and have self-resonant frequencies ranging from 1.8 to 14.0 GHz. They can handle rms currents of up to 2.7-11.1 A.
Download Datasheet Product Details
RF Spectrum Analyzer
Real-time Spectrum Analyzer from 100 kHz to 43.5 GHz
RF Spectrum Analyzer  from Signal Hound

The SM435C from Signal Hound is a Real-time Spectrum Analyzer that operates from 100 kHz to 43.5 GHz. It has a dynamic range of 110 dB, a sweep speed of 1 THz/sec at 30kHz RBW (using Nuttall windowing), and an SSB phase noise of -138 dBc/Hz@100 kHz offset. This RTSA is designed for remotely-located accurate RF data analysis at the lowest cost possible and includes a 10 Gigabit Ethernet SFP+ port, enabling it to communicate with a PC over long distances using a fiber optic cable.
Download Datasheet Product Details
RF Amplifier
800 W Class A/AB Solid State Power Amplifier from 1 to 6 GHz
RF Amplifier  from Exodus Advanced Communications

The AMP2030-800-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 1 to 6 GHz. It delivers a CW/Pulsed saturated output power of more than 800 W with a power gain of over 59 dB and a gain adjustment range of 20 dB. This amplifier has built-in protection circuits with extensive amplified parameter monitoring for forward/reflected power (in dBm and watts), VSWR, as well as voltage, current and temperature sensing.
Download Datasheet Product Details
DC Block
200 V, Inner DC Block from 10 MHz to 18 GHz
DC Block  from Inmet by Spectrum Control

The 8037 is an SMA Male to Female Inner DC Block that operates from 10 MHz to 18 GHz. It has an insertion loss of less than 0.5 dB and a VSWR of 1.25:1 through the band. The DC Block is matched to 50 ohms and has a 200 V voltage rating.
Download Datasheet Product Details
Sponsored by Mouser Electronics
 
 
Directional Coupler
mm-Wave Directional Coupler from 6 to 40 GHz
Directional Coupler  from MECA

The 765-20-23.000 from MECA is a 5G-ready mm-wave Directional Coupler that operates from 6 to 40 GHz (Covering the C to V Band). It has a coupling value of 20 dB and can handle up to 20 watts of average power. The coupler has an insertion loss of less than 1.3 dB and directivity of more than 12 dB. It is available in a module with 2.92mm (F) connectors.
Download Datasheet Product Details
Attenuator Matrix
32-Channel Solid-State Attenuator Matrix from 0.4 to 6 GHz
Attenuator Matrix  from Quintech

The NEXUS-M from Quintech is a Solid-State Mesh Attenuator Matrix that operates from 400 to 6000 MHz. It is available in configurations with up to 32 ports; any port can connect to any other port. Each connection has an independently controlled variable attenuator that allows power levels to be controlled between nodes. This bi-directional matrix provides variable attenuation from 0 to 60 dB in 0.5 dB steps with an ON/OFF isolation of 70 dB.
Download Datasheet Product Details
RF Amplifier
40 W Solid State High Power Amplifier from 0.6 to 6 GHz
RF Amplifier  from Empower RF

The 1219 from Empower RF is a solid-state broadband high power amplifier that operates from 600 to 6000 MHz. It delivers an output power of 40 watts and a gain of 61 dB with a noise figure of 15 dB. This class AB amplifier module is suitable for broadband mobile communications, jamming and band-specific high power applications in the UHF, L, S, and C frequency bands.
Download Datasheet Product Details
RF Amplifier
High-Efficiency Power Amplifier from 2496 to 2690 MHz
RF Amplifier  from Skyworks Solutions

The SKY66398-11 from Skyworks Solutions is a Power Amplifier that operates from 2496 to 2690 MHz. It has a bandwidth of more than 100 MHz and delivers an output power of +30 dBm. This amplifier requires a single DC supply of 5 V and has an integrated active biasing circuit to compensate PA performance over temperature, voltage, and process variation.
Download Datasheet Product Details
Waveguide Mixer
mmWave Waveguide Harmonic Mixer from 60 to 90 GHz
Waveguide Mixer  from Farran

The WHMB-12-0003 from Farran is a Waveguide Harmonic Mixer with an RF frequency from 60 to 90 GHz and an IF frequency range from DC to 2000 MHz. It requires an LO drive level of +17 dBm and has a conversion loss of 32 dB. This mixer integrates an LO/RF diplexer to separate the LO and IF frequencies at the LO/IF common port.
Download Datasheet Product Details
Balun
Low-Profile 1:4 RF Balun from 700 to 2700 MHz for LTE Applications
Balun  from TTM Technologies

The T0727J5012AHF from TTM Technologies is an RF Balun that operates from 700 to 2700 MHz. It has an input-to-output port impedance ratio of 1:4 with an input port impedance of 50 ohms and an output port impedance of 12.5 ohms. This balun has a small footprint and replaces the conventional discrete component matching network for LTE applications.
Download Datasheet Product Details
RF Amplifier
Surface-Mount CATV Amplifier from 5 to 1800 MHz
RF Amplifier  from Analog Devices

The ADCA5190 from Analog Devices is a Gain Block Amplifier that operates from 5 to 1800 MHz. It provides a gain of 19.1 dB with a noise figure of less than 4.1 dB and a reverse isolation of 23.5 dB. This amplifier is manufactured on a pHEMT GaAs process and has suitable drive capability to overcome nominal insertion losses introduced by automatic gain control and tilt functions.
Download Datasheet Product Details
Antenna
Inverted Flexible PIFA Antennas from 2400 to 2480 MHz
Antenna  from Laird Connectivity

The i-FlexPIFA Series from Laird Technologies are Inverted Flexible PIFA Antennas that operate from 2400 to 2480 MHz. These linearly polarized antennas provide a peak gain of +3.1 dBi and have a VSWR of less than 2.5:1. They have a strong adhesive that holds to the surface during humidity exposure and hot/cold cycles.
Download Datasheet Product Details
RF Module
Bluetooth 5.2 Wireless SoC for Secure Automotive Applications
RF Module  from onsemi

The NCV-RSL15 from onsemi is a Bluetooth 5.2 Wireless System-on-Chip (SoC) that has been designed for IoT and deeply embedded applications that require high performance, power efficiency, and security. It consists of ARM Cortex-M33 MCU (memory and protection features), RF front-end, 512 KB flash memory, 64 KB RAM memory, power management, clock management, protection circuits, memory management, and programmable interfaces.
Download Datasheet Product Details
RF Amplifier
1 W GaN Amplifier MMIC from 12.7 to 18 GHz
RF Amplifier  from Wolfspeed

The CMPA1D1J001S from Wolfspeed is a High-Power Amplifier MMIC that operates from 12.7 to 18 GHz. It delivers a saturated output power of 1 W (up to 31.5 dBm) with a large signal gain of 23 dB and a power-added efficiency of up to 35%. This amplifier utilizes Wolfspeed’s high performance, 0.15µm GaN on the SiC production process, and supports both radar and communication applications within both military and commercial markets.
Download Datasheet Product Details
Power Divider
16-Way Power Divider from 500 to 6000 MHz
Power Divider  from Werbel Microwave

The D-16002 from Werbel Microwave is a 16-Way Power Divider that operates from 500 to 6000 MHz. It can handle an input power of up to 30 W, provides an isolation of more than 16 dB, and has an insertion loss of less than 4.5 dB. The power divider has an amplitude balance of ±1.2 dB and a phase balance of ±16°.
Download Datasheet Product Details
Waveguide Diplexer
Waveguide Diplexers from 7.25 to 86 GHz
Waveguide Diplexer  from Anteral

The DPLX Series from Anteral are Waveguide Diplexers that operate from 7.25 to 86 GHz. They are available in different frequency configurations and have a passband insertion loss of less than 1 dB with up to 90 dB rejection. These diplexers are available in modules that measure 68 x 20 x 20 mm with waveguide interfaces and are ideal for TTC and payload subsystem applications.
Download Datasheet Product Details
Frequency Synthesizer
25 MHz to 6 GHz Rugged, Surface Mount Frequency Synthesizer
Frequency Synthesizer  from SignalCore

The SC800 nanoSynth from SignalCore is a fully integrated broadband CW signal synthesizer that has a tuning range from 25 MHz to 6 GHz with a 1 Hz resolution. It combines multiple PLL, DDS, and frequency dividers into a rugged, miniature surface mountable package. It can generate low phase noise signals with up to 10 dBm of power.
Download Datasheet Product Details
RF Variable Attenuator
63 dB USB Programmable Attenuator from 0.01 to 21 GHz
RF Variable Attenuator  from Micro Lambda Wireless, Inc.

The MLAT-1000B from Micro Lambda Wireless is a Programmable Attenuator that operates from 0.01 to 21 GHz. It provides an attenuation of up to 63 dB in 0.5 dB steps and has a switching time of 20 us. The attenuator has an insertion loss of less than 7 dB and a VSWR of below 2.1:1. It requires a DC supply voltage of 4-6 V, consumes 50 mA of current and has 2.7/3.3/5.0 V digital control logic.
Download Datasheet Product Details
SATCOM Amplifier System
250 W Solid-State Power Amplifiers/Block Up-Converters from 13.75 to 14.5 GHz
SATCOM Amplifier System  from Advantech Wireless Technologies

The Genesis Series from Advantech Wireless Technologies are Solid-State Power Amplifiers (SSPA)/Block Up-Converters (SSPB) that convert an input frequency from 950 – 1700 MHz to an output frequency from 13.75 – 14.5 GHz. They deliver an output power of up to 250 W with an adjustable gain of more than 75 dB (0.1 dB steps).
Download Datasheet Product Details
NFC Reader
NFC Reader Chipset for IoT, PoS, MPoS and SmartPoS Applications
NFC Reader  from Panthronics

The PTX100R from Panthronics is a Multi-Protocol NFC Reader chipset that operates at a frequency of 13.56 MHz. It supports a bit rate from 26.5 to 848 kbit/s and has an operating distance of up to 320 mm. This reader chipset provides an output power of up to 2 W and has a receiver/LMA sensitivity of -80 dBc. It is based on 180 nm technology and has an EMI filter-less (DiRAC) end-application RF design.
Download Datasheet Product Details
Wireless Charging Receiver
50 W Wireless Power Transmitter/Receiver with WattShare TRx Mode
Wireless Charging Receiver  from Renesas

The RA9530 from Renesas is a Wireless Power Transmitter/Receiver (TRx) IC that supports WPC 1.3 specification. It delivers up to 50 W of power in proprietary mode and has a WattShare™ TRx mode with a Tx capability of up to 10 W. This wireless power transmitter/receiver IC supports bi-directional data communications and can be configured to receive or transmit an AC power signal through magnetic induction.
Download Datasheet Product Details
Antenna
Vehicular Mount Antennas from 941.5 to 2000 MHz for Military Applications
Antenna  from ARA

The ARA-1220 Series from ARA are Vehicular Mount Antennas that operate from 941.5 to 2000 MHz. These vertically polarized antennas provide a gain of up to 15 dBi and have a VSWR of less than 1.75:1. They have an omni-directional radiation pattern. The antennas have an option for an integrated bandpass filter and low-noise preamplifier with a noise figure of 1 dB (requires a DC supply from 12 to 15 V).
Download Datasheet Product Details
Base Station Antenna
1.2 m Point-to-Point Base Station Antenna from 7.725 to 8.5 GHz
Base Station Antenna  from Radio Frequency Systems

The UXA4-78AD from Radio Frequency Systems is a Point-to-Point (PtP) Base Station Antenna that operates from 7.725 to 8.5 GHz. This dual-polarized antenna provides a gain of 37 dB and has a VSWR of less than 1.08:1. It has a 3 dB beamwidth of 2.1° and a front-to-back ratio of 62 dB. The antenna has a cross-polar discrimination of 38 dB to provide complete isolation between the radions in each polarization.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]