| New RF and Microwave Products this Week . |
|
|
|
|
|
|
|
|
|
|
|
|
| 0.5 W Driver Amplifier from 2.3 to 5 GHz | |
RF Amplifier
from Qorvo
|
| The QPA9122 from Qorvo is a Driver Amplifier that operates from 2.3 to 5 GHz. It delivers an output power of 0.5 W (P3dB) with a gain of 36 dB. This amplifier is internally matched to 50 ohms over the entire operating frequency range and incorporates a shut-down function through the VPD pin. It requires a DC supply of 5 V and consumes 95 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| Optical Delay Line for RADAR Altimeter Testing | |
Delay Line
from RFOptic
|
| The Altimeter Optical Delay Line (ALT ODL) from RFOptic is a high-performance system for testing and calibration of RADAR altimeter systems. This RADAR Altimeter Test solution provides a high-performance solution for testing and calibrating Altimeter RADAR systems. It allows the user to replicate the landing and taking off of planes with real-time accuracy for training pilots. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1kW Solid-State Power Amplifier from 1 to 6 GHz for EMC Testing | |
RF Amplifier
from AR RF/Microwave Instrumentation
|
| The Model 1000S1G6C from AR RF/Microwave Instrumentation is a Solid-State Power Amplifier that operates from 1 to 6 GHz. It delivers a CW output power of up to 1000 W with a small signal gain of 66 dB. This SSPA has spurious levels of -73 dBc and harmonic distortion of -30 dBc. The low spurious levels and high linearity make it ideal for use as a driver amplifier in testing wireless and communication components and subsystems. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
| Sponsored by ETL Systems | | Scorpion Components Rack Mount System | | RF Component 1U mounting chassis. Modules include: Amplifiers, Couplers, RF over Fibre, Splitters/Combiners, Multiplexers. Front or rear mount Scorpion plates provide flexibility for easy cabling. Chassis can house 8 half-width, 4 full-width modules, or a mixture thereof. Click here to learn more. | | | |
|
|
| Real-Time Spectrum Analyzer with GNSS Capabilities | |
RF Spectrum Analyzer
from ThinkRF
|
| The R5750 from thinkRF is a Real-Time Spectrum Analyzer with built-in GPS for mobile wireless situational awareness applications. With built-in GPS capabilities, this Real-Time Spectrum Analyzer enables engineers in the field to conduct in-depth analysis of complex waveforms while knowing the location and time of each measurement. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Low-Profile Ceramic Core Chip Inductors from 1 to 56 nH | |
RF Inductor
from Coilcraft
|
| The 0603CT Series from Coilcraft are Low-Profile Ceramic Core Chip Inductors available in inductance values from 1.0 to 56 nH. They have Q-factors up to 95, a self-resonant frequency (SRF) of 16.0 GHz and a DC resistance of less than 0.700 ohms. These inductors are available in surface-mount packages that measure 1.63 x 0.84 x 0.61 mm with Tin over Ni over Ag-Pt-glass frit termination. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Way Resistive Power Divider from DC to 110 GHz | |
Power Divider
from SHF Communication Technologies
|
| The SHF PDV110 A from SHF Communication Technologies is a 2-Way Resistive Power Divider that operates from DC to 110 GHz. It can handle an input power of up to 1 W and has an insertion loss of less than 9 dB. This resistive power divider has an amplitude balance of ±1.2 dB and a phase balance of ±15°. It is available in a connectorized module that measures 42.2 x 30.1 x 9 mm and has 1.0 mm (female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 31 dB, 6-Bit Digital Attenuator MMIC from 0.1 to 8 GHz | |
RF Variable Attenuator
from Sainty-Tech Communications Limited
|
| The BW179D from Sainty-Tech Communications is a 6-Bit GaAs Digital Attenuator MMIC that operates from 0.1 to 8 GHz. It provides an attenuation from 0.5 to 31.5 dB with an accuracy of 0.5 dB (RMS) and has a switching time of 30 ns. This attenuator can handle an input power of +24 dBm and has an insertion loss of 2.5 dB. It is available as a bare die that measures 2.40 x 1.40 x 0.10 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Positive Slope Waveguide Detector from 33 to 50 GHz | |
Waveguide Detector
from HASCO Components
|
| The HWPSD22-3350-S2 from HASCO is a Waveguide Detector that operates from 33 to 50 GHz. This positive slope detector has a sensitivity of better than 1500 mV/mW and a tangential sensitivity of -55 dBm. It can handle an input power of up to 20 dBm and is designed to have a video impedance of 10 MHz and a video output impedance of 1 milliohm. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
| Programmable Solid-State Attenuator Assembly from 200 to 8000 MHz | |
RF Variable Attenuator
from JFW Industries
|
| The 50PA-1183-XX from JFW Industries is a Bi-Directional, Programmable Attenuator Assembly that operates from 200 to 8000 MHz. It is available with 1 to 8 solid-state step attenuators (user can specify the number of attenuators required), each providing up to 95 dB of attenuation with 1 dB step size. The attenuators have an insertion loss of less than 8 dB and a typical switching speed of 4 µs. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| RF Shielded Test Box for Sub-6 GHz Applications | |
RF Shielded Test Enclosure
from RF Electronics
|
| The HDRF-1560-D from RF Electronics is an RF Shielded Test Box that operates at frequencies up to 6 GHz. The test box can be used to test WLAN devices, 802.11 a,b,g,n, Bluetooth, RFID and other applications that operate in the sub-6 GHz frequency band. It has a thick RF absorbing foam that dampens standing waves and reflections by providing an isolation of over 130 dB under 1 GHz and over 90 dB at 6 GHz. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4/5 GHz 1x1 Dual-Band Wi-Fi 5 + Bluetooth 5.4 Combo Chip | |
Wireless SoC
from Infineon Technologies
|
| The AIROC CYW43022 from Infineon Technologies is a compact 1x1 2.4/5 GHz Wi-Fi 5 (802.11ac) + Bluetooth 5.4 Combo Chip. It has been designed for low power IoT applications. This combo chip is built on market-proven wireless IP to ensure maximum interoperability and supports concurrent Wi-Fi and Bluetooth connectivity use cases and co-existence. |
| |
Download Datasheet
Product Details | |
|
|
|
| LTE Cat-M1/Cat-NB2/EGPRS IoT Module for Global Operation | |
Cellular Module
from Fibocom
|
| The MA510-GL from Fibocom is an IoT Module that is designed for the global IoT market. It is based on the Qualcomm platform and supports LTE Cat-M1/Cat-NB2/EGPRS. This module has built-in GNSS that supports GPS, GLONASS, BeiDou, and Galileo constellations. It has an integrated QTT/CoAP/LWM2M rich network protocol and supports eDRX and PSM low power mode limiting current consumption to as low as 3.2 µA (PSM). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Wideband Low Noise Amplifier from 0.5 to 18 GHz | |
RF Amplifier
from ERZIA
|
| The ERZ-LNA-0050-1800-18-3.5 from ERZIA is a Wideband Low Noise Amplifier (LNA) that operates from 0.5 to 18 GHz. It provides a small signal gain of 18 dB with a noise figure of 3 dB and has an output P1dB of more than 17 dBm. This RoHS-compliant amplifier requires a DC supply of 15 V and consumes 2.5 W of power. It is available in a module that measures 16.3 x 17.8 x 7.3 mm with SMA (female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ruggedized MEMS-Based Precision TCXO from 1 to 60 MHz | |
TCXO
from SiTime
|
| The Endura™ SiT5543 from SiTime is a Precision Super-TCXO that operates from 1 to 60 MHz. It provides a clipped sinewave/LVCMOS output with a frequency stability of ±5 ppb. This oscillator delivers OCXO-level frequency stability without the use of custom-made, low g-sensitivity Quartz OCXOs. It is a MEMS-based solution that is ideal for replacing bulky, less robust, and power-consuming Quartz OCXOs, and offers a 40% reduction in size with up to two-fold lower power consumption. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Rugged, Multiband Vehicular-Mounted Antenna from 225 to 2000 MHz | |
Antenna
from ARA
|
| The ARA-252 from ARA is a Multiband Vehicular-Mounted Antenna that operates from 225 to 2000 MHz. It provides a gain of 2 dBi and has a VSWR of 2.0:1. This 50-ohm single-port antenna can handle an input power of up to 125 W and does not require any tuning or ground plane for operation. It is an environmentally qualified, Commercial Off the Shelf (COTS), TRL-8 (Technology Readiness Level) antenna and bolts to a standard universal antenna mount, or a NATO standard 4.5-inch bolt circle found on most military vehicles. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
