| Featured Products this Week . |
|
|
|
|
|
|
|
| GaN Hybrid Power Amplifier Module from 1805 to 1880 MHz | |
RF Amplifier
from RFHIC
|
| The SDM18003-30H from RFHIC is a fully integrated micro-strip GaN Hybrid power amplifier module that operates from 1805 to 1880 MHz. It is designed for 5G m-MIMO, TDD/FDD systems, mobile infrastructure, small cells and low power remote radio head applications. The amplifier delivers a saturated output power of 40 W with a gain of 44 dB and a drain efficiency of 12.5 %. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 dB Directional Coupler from 0.3 to 8 GHz | |
Directional Coupler
from Werbel Microwave
|
| The C-1830-10 from Werbel Microwave is a Directional Coupler that operates from 0.3 to 8 GHz. This 10 dB coupler has a directivity of 25 dB and an insertion loss of less than 1 dB. It can handle up to 20 W of input power and 3 W of reverse power and has a coupling flatness of ±1 dB. The coupler is available in a module that measures 6.00 x 0.73 x 0.50 inches and has SMA-female connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 20 dB Fixed Attenuator from DC to 50 GHz | |
Fixed Attenuator
from MECA
|
| The 669-20-1 from MECA is a Fixed Attenuator that operates from DC to 50 GHz. It provides an attenuation of 20 dB with an accuracy of ±0.5 to ±2 dB. The attenuator can handle an average input power of up to 0.5 W and has a VSWR of less than 1.75:1. It is available as a connectorized module that measures 1.12 x 0.312 inches and has 2.4mm (male/female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1 W Pick Off Tee from DC to 40 GHz | |
Pick off Tee
from Sigatek
|
| The T1512R2F from Sigatek is a Pick Off Tee that operates from DC to 40 GHz. It can handle an input power of up to 1 W and has a maximum pick-off of 15 dB (±1.5 dB). This pick-off tee has an insertion loss of less than 1.9 dB and a VSWR of 1.70:1. It is available in a module that measures 15.2 x 15.2 x 10.2 mm and has 2.92 mm (female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5 GHz Integrated Wi-Fi 6 Front-End Module | |
Front End Module
from Qorvo
|
| The QPF4506B from Qorvo is a Wi-Fi 6 Front-End Module that operates from 5150 to 5850 MHz. It has been designed for Wi-Fi 802.11ax systems and offers a compact form factor with integrated matching that minimizes layout area in the application. This module consists of a 5 GHz power amplifier (PA), bypassable low noise amplifier (LNA), regulator, single pole double throw (SP2T) switch, logarithmic power detector, and a coupler. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
| Low-Profile Ceramic Core Chip Inductors from 1 to 56 nH | |
RF Inductor
from Coilcraft
|
| The 0603CT Series from Coilcraft are Low-Profile Ceramic Core Chip Inductors available in inductance values from 1.0 to 56 nH. They have Q-factors up to 95, a self-resonant frequency (SRF) of 16.0 GHz and a DC resistance of less than 0.700 ohms. These inductors are available in surface-mount packages that measure 1.63 x 0.84 x 0.61 mm with Tin over Ni over Ag-Pt-glass frit termination. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 750 W Solid State Amplifier System from 1 to 6 GHz | |
RF Amplifier
from AR RF/Microwave Instrumentation
|
| The 750S1G6C from AR RF/Microwave Instrumentation is a Solid-State Amplifier System that operates from 1 to 6 GHz. This class A amplifier delivers a saturated output power of more than 750 W from 1 to 4.2 GHz and 500 W from 4.2 to 6 GHz. It is immune to input overdrive above 0 dBm (up to 13 dBm), power supply faults, over-temperature, and has protection against other failure conditions as well. |
| |
Download Datasheet
Product Details | |
|
|
|
| Range Enhanced, Rugged Radio System from 2407 to 2477 MHz | |
Data Link
from Triad RF Systems
|
| The THPR1006 from Triad RF Systems is a Range Enhanced Amplified Radio System that operates from 2407 to 2477 MHz. It integrates the necessary RF amplification, control circuitry, and interfaces to achieve higher RF output power, greater throughput, and longer link distances than standalone radios. The radio is ideal for use in long-distance high data rate ISR links, UAS, UGV, and USV video/data links, and point-to-point and mesh networking applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| High-Speed Reflective SP3T Switch from 1 to 18 GHz | |
RF Switch
from KRATOS General Microwave
|
| The E9130H from Kratos is a Reflective SP3T Switch that operates from 1 to 18 GHz. It has a TTL control interface with a rise/fall time of 10 nsec. This switch provides more than 60 dB of isolation and has an insertion loss of less than 2.6 dB. It can handle an input power of up to 1 W and a peak power of 75 W with a VSWR of less than 2:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6-bit Programmable Attenuator from 100 MHz to 40 GHz | |
RF Variable Attenuator
from Quantic PMI (Planar Monolithics)
|
| The DTA-100M40G-30-CD-1-BCD from Quantic PMI is a 6-bit Programmable Attenuator that operates from 100 MHz to 40 GHz. It has an attenuation range of 30 dB which can be controlled in 1 dB steps and has an attenuation accuracy of ±1.0 dB (at +25°C). This attenuator has an insertion loss of 5 dB (up to 20 GHz) & 7.5 dB (up to 40 GHz) and a switching time of less than 1 µs (on time) & 0.5 µs (off time). |
| |
Download Datasheet
Product Details | |
|
|
|
| Block Down Converter from 11.55 to 12.15 GHz for SATCOM Systems | |
Low Noise Block
from Jersey Microwave
|
| The KBDC-115121-2015 from Jersey Microwave is a Block Down Converter that converts input frequencies from 11.55-12.15 GHz (Ku-band) to output frequencies from 950-1550 MHz (L-band). It has an LO frequency of 10.6 GHz and an LO leakage of less than -70 dBm. This BDC delivers an output power of (P1dB) of more than +15 dBm with 20 dB of gain and has an SSB phase noise of -125 dBc/Hz (at 1 MHz offset). |
| |
Download Datasheet
Product Details | |
|
|
|
| Phase Linear Microwave Cable Assemblies from DC to 70 GHz | |
RF Cable Assembly
from Carlisle Interconnect Technologies
|
| The UTiPHASE™ UFP088D Series from Carlisle are Microwave Cable Assemblies that operate from DC to 70 GHz. They have a diameter of 2.24 mm and a minimum bend radius of 6.35 mm. These cable assemblies provide more than 90 dB of RF shielding, have a dielectric withstanding voltage of 5000 VRMS and an insertion loss of less than 7.78 dB/m. |
| |
Download Datasheet
Product Details | |
|
|
|
| High Linearity Track-and-Hold Amplifier from DC to 50 GHz | |
RF Amplifier
from Teledyne Scientific & Imaging
|
| The RTH110 from Teledyne Scientific & Imaging is a Track and Hold Amplifier that operates from DC to 50 GHz. It has a total harmonic distortion (THD) of better than -35 dBc and a spurious free dynamic range (SFDR) of better than 38 dBc (at 50 GHz). This amplifier has an output bandwidth of 300 MHz with a sampling rate of better than 10 GHz. |
| |
Download Datasheet
Product Details | |
|
|
|
| Radiation-Hardened Software Defined Radio from 70 MHz to 3 GHz | |
Software Defined Radio
from Space Micro
|
| The µSDR-C from Space Micro is a Software Defined Radio for space applications that operates from 70 MHz to 3 GHz. It has a tunable channel bandwidth from 200 kHz to 56 MHz and provides a data rate up to 42 Mbps. This radio supports BPSK, OQPSK, 8PSK, 16APSK, FSK modulation schemes and includes 12-bits ADC/DAC with a sample rate of 30.72 Msps. |
| |
Download Datasheet
Product Details | |
|
|
|
| Space-Qualified Bandpass Filter with Passband from 6468 to 6588 MHz | |
Band Pass Filter
from Mercury Systems
|
| The C1970 from Mercury Systems is a Bandpass Filter with a passband from 6468 to 6588 MHz. It has a passband insertion loss of less than 3 dB and provides a rejection of 61 dBc (at fo ± 207 MHz). This filter has a space-qualified cavity design with an ultra-linear phase and delay. It is available in a module that measures 4.00 x 1.25 x 0.75 inches and has SMA-female connectors (per MIL-C-39012). |
| |
Download Datasheet
Product Details | |
|
|
|
| Ku-Band Transceivers from 10.95 to 14.50 GHz for VSAT Networks | |
SATCOM Transceiver
from Amplus Communication
|
| The AM-9446 Series from Amplus Communication are high performance Ku-band Transceivers designed for use in SCPC, DAMA and TDMA VSAT satellite earth stations. They operate from 13.75 to 14.50 GHz (Tx) and 10.95 to 12.75 GHz (Rx). In the Tx mode, they provide an output power (P1dB) of 100 W with a gain of 70 dB and gain adjustment of 25 dB in 0.5 dB steps. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 2.4 GHz LEO Satellite IoT Endpoint SoC | |
Wireless SoC
from Orca Systems
|
| The ORC3990 from Orca Systems is an LEO Satellite Endpoint SoC that is designed to support the requirements of Totum’s LEO satellite network. It includes Orca Systems’ flexible, third-generation Live Wireless™ RF and digital radio subsystem. The SoC has integrated functional blocks that include a low noise amplifier (LNA) and a digital power amplifier (PA). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 60 GHz V-band Transceiver for Contactless Connectivity | |
RF Transceiver
from STMicroelectronics
|
| The ST60A3G1 from STMicroelectronics is a 60 GHz V-band Transceiver for Contactless Connectivity. It delivers a short-range data transfer rate of 480 Mbit/s and operates in full-duplex mode. This transceiver has an integrated antenna and a total link budget of 44 dB. It requires a DC supply of 1.8 V and consumes less than 130 mW (Tx) & 110 (Rx) of power. |
| |
Download Datasheet
Product Details | |
|
