| Featured Products this Week . |
|
|
| 30 GHz Flexible Microwave Cable | |
RF Cable
from HUBER+SUHNER
|
| The SL290 from HUBER+SUHNER is a Flexible Microwave Cable that operates up to 30 GHz. It has an outer diameter of 5 mm, a minimum bend radius of 27.5 mm and provides a screening effectiveness of better than 90 dB (up to 18 GHz). This 50-ohm cable has a velocity of propagation of 84%, a signal delay of 4 ns/m and a phase vs temperature variation of 500 ppm (from -55°C to +125°C). |
| |
Download Datasheet
Product Details | |
|
|
|
| Cryogenic Cable Assembly from DC to 65 GHz | |
RF Cable Assembly
from CryoCoax
|
| The NbTi 085 from CryoCoax is a Cryogenic Cable Assembly that operates from DC to 65 GHz. It has a 2.19 mm NbTi outer conductor, 0.51 mm NbTi inner conductor and 1.62 mm dielectric. This cable assembly has a minimum bend radius of 30 mm and is available with SMA, 2.92 mm (soldered and solderless), 2.4 mm and 1.85 mm connector options. |
| |
Download Datasheet
Product Details | |
|
|
|
| High Reliability, Air Core Power Inductors 33 to 257 nH | |
RF Inductor
from Coilcraft
|
| The 2014VS Series from Coilcraft are High Frequency Power Inductors with inductance values from 33 to 257 nH. These air core inductors can handle up to 57 A of current with no core loss and have Q factors up to 230 (400 MHz). They are available in packages that measure 19.56 x 11.40 x 13.60 mm with RoHS-compliant tin-silver over copper terminations. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4 kW Class AB Pulsed Solid-State Power Amplifier from 1 to 2.5 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2074P-4KW from Exodus Advanced Communications is a Solid-State Power Amplifier (SSPA) that operates from 1.0 to 2.5 GHz. It delivers a pulsed output power of more than 4 kW with a power gain of 66 dB. This SSPA is based on the Class AB linear advanced technology design that delivers high efficiency with unprecedented reliability and ruggedness. It has spurious levels of less than -60 dBc and harmonics of -20 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1kW Solid-State Power Amplifier from 1 to 6 GHz for EMC Testing | |
RF Amplifier
from AR RF/Microwave Instrumentation
|
| The Model 1000S1G6C from AR RF/Microwave Instrumentation is a Solid-State Power Amplifier that operates from 1 to 6 GHz. It delivers a CW output power of up to 1000 W with a small signal gain of 66 dB. This SSPA has spurious levels of -73 dBc and harmonic distortion of -30 dBc. The low spurious levels and high linearity make it ideal for use as a driver amplifier in testing wireless and communication components and subsystems. |
| |
Download Datasheet
Product Details | |
|
|
|
| GaAs pHEMT Low Noise Amplifier MMIC from 3.5 to 8.2 GHz | |
RF Amplifier
from AmpliTech
|
| The AGLNA035082 from AmpliTech is a pHEMT Low Noise Amplifier (LNA) MMIC that operates from 3.5 to 8.2 GHz. It provides 26.5 dB of gain with a noise figure of 0.9 dB and has a saturated output power of 12 dBm. This LNA requires a DC supply of +5 V and consumes 25 mA of current. It is available as a 50-ohm internally matched die that measures 1.75 x 1.25 x 0.10 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
| 24 GHz Dual-Channel Short-Range Doppler Radar Transceiver | |
Radar Sensor
from RFbeam Microwave
|
| The K-LC6 from RFbeam is a 24 GHz Short-Range Doppler Radar Transceiver. This dual-channel module has an asymmetrical narrow beam for short to medium-distance sensors and is ideally suited for person and vehicle movement and presence sensors. It includes an RF low noise amplifier (LNA) for improved signal-to-noise performance and has dual IF I and Q which allow movement direction detection and high-performance signal processing. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 2.4/5/6 GHz Terminal-Mount Antenna for Wi-Fi 6E/7 Applications | |
Antenna
from Antenova
|
| The SRE3W084 from Antenova is a Wi-Fi 6E/7 Terminal Mount Antenna that operates in the 2.4 GHz (2.4 – 2.5 GHz), 5 GHz (4.9 – 5.9 GHz) and 6 GHz (5.925 – 7.125 GHz) bands. This linearly polarized antenna provides a peak gain of 5.2 dBi, with an efficiency of up to 70%, and has a VSWR of less than 2.3:1. It can be fitted on the outside of the product enclosure with a SMA connector. |
| |
Download Datasheet
Product Details | |
|
|
|
| Sub-Octave Switch Filter Bank from 2 MHz to 8 GHz | |
Switched Filter Bank
from ATEK MIDAS
|
| The ATEK950P6 from ATEK MIDAS is a Sub-Octave Switch Filter Bank that operates from 2 to 8000 MHz. It consists of an SP8T switch followed by 7 fixed frequency bandpass filters which are followed by another SP8T switch. Each SP8T switch is used to send the input/output signals to 2 pins. This allows users to bypass the filter bank off-chip. |
| |
Download Datasheet
Product Details | |
|
|
|
| Thin-Film Bandpass Filter with Passband from 12 to 18 GHz | |
Band Pass Filter
from Smiths Interconnect
|
| The 6PFX-15000/R6000-M from Smiths Interconnect is a Bandpass Filter with a passband from 12 to 18 GHz. It provides 30 dB of rejection from DC to 8 GHz and 40 dB from 22.75 to 25 GHz. This filter is based on thin film process technology using various dielectric substrates which are designed for use in harsh environments. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Passive Double Balanced Mixer from 2.25 to 18 GHz | |
RF Mixer
from Amcom Communications
|
| The AM02318010XD-P4 from AMCOM Communications is a Passive Double Balanced Mixer with an RF/LO frequency from 2.25 to 18 GHz and an IF frequency from DC to 3 GHz. It has an LO level of 13 dBm and a conversion loss of less than 13 dB. This mixer provides an LO-RF isolation of 35 dB, an LO-IF isolation of 20 dB, and an RF-IF isolation of 12 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| High-Stability OCXO Series from 10 to 120 MHz | |
OCXO
from Bliley Technologies
|
| The BOVXE Series from Bliley Technologies are Oven Controlled Oscillators (OCXO) that operate from 10 to 120 MHz. They provide a Sine/CMOS output with a phase noise of -155 dBc/Hz @10 kHz offset (10 MHz freq.) and have frequency stability options of ±20, ±50, ±100 ppb. These oscillators have a maximum warm-up time of 3 minutes, a rise/fall time of less than 5 ns, and a duty cycle of 50%. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rugged Broadband Frequency Synthesizer from 1.25 to 20 GHz | |
Frequency Synthesizer
from SignalCore
|
| The SC802A from SignalCore is a Broadband Frequency Synthesizer that generates an output frequency from 1.25 to 20 GHz. This synthesizer has a frequency resolution of 1 MHz with a tuning speed of less than 500 µs. It delivers an output power of up to +7 dBm, has a phase noise of less than -115 dBc/Hz at 10 kHz offset and sideband spurious levels of better than -60 dBc, and harmonics of less than -65 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| High Frequency, Low Cost Ceramic Laminates to Replace FR-4 | |
Laminate
from Rogers Corporation
|
| The RO4350B hydrocarbon ceramic laminate from Rogers has been developed for high-frequency, low cost applications. The laminate can be fabricated into printed circuit boards using standard FR-4 circuit board processing techniques. Unlike PTFE based high performance materials, this series of laminates do not require specialized via preparation processes such as sodium etch. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4/7.5/13.6/30/44 GHz Signal and Spectrum Analyzers for 5G-NR Device Testing | |
RF Spectrum Analyzer
from Rohde & Schwarz
|
| The FSVA3000 from Rohde & Schwarz are Signal and Spectrum Analyzers that operate from 2 Hz to 4/7.5/13.6/30/44 GHz. They are designed to perform demanding signal analysis tasks and can help users set up complex measurements in the simplest and fastest way possible. These spectrum analyzers have an analysis bandwidth of up to 1 GHz and an SSB phase noise of –127 dBc/Hz @ 10 kHz offset. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-Operator 5G Distributed Antenna System from 3700 to 3980 MHz | |
Microwave Backhaul Radio Links
from SOLiD
|
| The ALLIANCE from SOLiD is a Multi-Operator 5G Distributed Antenna System (DAS) that operates from 3700 to 3980 MHz. This modular, multi-operator DAS solution supports public safety communications, 2-way radio, and commercial wireless services -all delivered over a single fiber and common headend. It provides a flexible system architecture where any ALLIANCE remote can operate in the same system. |
| |
Download Datasheet
Product Details | |
|
|
|
| 694-960/1710-2690 MHz Base Station Antenna | |
Base Station Antenna
from Comba Telecom
|
| The ODI2-065R15M18J-G from Comba Telecom is a Base Station Antenna with 4 antenna elements - two of which operate from 694 to 960 MHz with a gain of over 13.5 dB and the other two that operate from 1710 to 2690 MHz with a gain of over 16.7 dB. It has a horizontal beamwidth of 65 degrees and a Front-to-back ratio of over 25 dB. |
| |
Download Datasheet
Product Details | |
|
