| Top 5G Products in 2023 . |
|
|
| Microwave Upconverter + Downconverter from 37 to 50 GHz for mmWave 5G Radios | |
RF Up-down Converter
from Analog Devices
|
| The ADMV1139A from Analog Devices is a Silicon-on-Insulator (SOI), Microwave, Upconverter, and Downconverter that operates from 37 to 50 GHz. It integrates an upconverter (transmitter), a downconverter (receiver), and a LO chain with a 4x multiplier in one chip. This up/down converter offers two modes of frequency translation. It is ideal for mmWave 5G radios, radar, electronic warfare systems, instrumentation, and point-to-point microwave radio applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Top-Side Cooled RF Power Amplifier for 5G Infrastructure from 3300 to 3670 MHz | |
RF Amplifier
from NXP Semiconductors
|
| The A5M34TG140-TC from NXP Semiconductors is a Doherty Power Amplifier Module that operates from 3300 to 3670 MHz. It is based on NXP's new top-side cooling technology that helps radio designers create thinner, lighter 5G radio units while reducing design and manufacturing complexities. This 8 W module series is designed for massive MIMO radios covering 3.3 GHz to 3.8 GHz — typically 32T32R (200 W) or 64T64R (320 W) radios. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5G Massive IoT SiP Module for LTE-M/NB-IoT Platforms | |
Cellular Module
from Skyworks Solutions
|
| The SKY66431-11 from Skyworks is a Multi-Band Multi-Chip System-in Package (SiP) for 5G Massive IoT (LTE-M/NB-IoT) platforms. It integrates the entire RF front end, transceiver, power management, crystals, memory, MCU, and baseband modem for an LTE multi-band radio. This SiP has been optimized for LTE-M/NB-IoT half-duplex operation (HD-FDD). |
| |
Download Datasheet
Product Details | |
|
|
|
| Low-Noise, High-Speed DAC Interface IC from 3 to 16 GHz | |
RF Amplifier
from mmTron Inc
|
| The TMC160 from mmTron is a DAC Interface IC that operates from 3 to 16 GHz. It amplifies and converts the differential output of a high-speed DAC to a clean, low-noise, single-ended signal to drive the RF chain of a transmitter. This IC integrates anti-alias lowpass filtering, low noise amplification, and a balun that converts the differential DAC output to a single-ended 50-ohm output compatible with traditional RF signal chains. |
| |
Download Datasheet
Product Details | |
|
|
|
| 8-Channel Tx/Rx TDD Beamformer IC from 24 to 40 GHz | |
Beamforming IC
from Otava, Inc
|
| The OTBF103 from Otava is a half-duplex, 8-channel Tx/Rx TDD Beamformer IC that operates from 24 to 40 GHz. The transmit mode takes a single input to eight outputs, where each channel has an individual phase and gain adjustment controls. The Receive mode consists of eight individually controllable phase and gain inputs to one combined output. |
| |
Download Datasheet
Product Details | |
|
|
|
| 8-Channel Beamforming Front-End IC from 26.5 to 29.5 GHz | |
Beamforming IC
from pSemi, A Murata Company
|
| The PE188200 from pSemi is an 8-Channel Beamforming Front-End IC that operates in the 5G n257 band from 26.5 to 29.5 GHz. It has two independently controllable RF chains of four channels supporting four dual-polarity antennas or eight single-polarity antennas. This beamforming IC has integrated power amplifiers, low-noise amplifiers, splitter/combiners, 6-bit phase/attenuation control, and phase & amplitude beamformers. |
| |
Download Datasheet
Product Details | |
|
|
| Featured Article | | How to Select a 5G Repeater | | Cellular repeaters have been in existence since the very early days of telecommunication. Fundamentally they deliver cellular service to an underserved region where the base station signal does not reach an area where connectivity to handsets is necessary. Initial use cases for repeaters served public safety and 2-way radios. Click here to read the full article. | | | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 5G Wireless Module for Home, Enterprise, and Manufacturing Applications | |
Cellular Module
from Fibocom
|
| The FM190-GL from Fibocom is a 5G Wireless Module that is compliant with the 3GPP Release 17 standard. It delivers a downlink data rate of up to 6.18 Gbps and an uplink data rate of up to 900 Mbps. This module supports global 5G Sub-6, LTE FDD/TDD, UMTS & CDMA bands and has 4 antennas. It requires a DC supply of 3.8 V and can be controlled via USB 3.1/3.0/2.0, PCIe 4.0/3.0, UIM, and I2S interfaces. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 10 dB Surface-Mount Attenuator MMIC from DC to 50 GHz | |
Fixed Attenuator
from Marki Microwave
|
| The ATN10-0050CSP1 from Marki Microwave is an Attenuator MMIC that operates from DC to 50 GHz. It can handle an input power of 1 W, provides an attenuation of 10 dB, and has an insertion loss of less than 10 dB. This GaAs MMIC is available in a surface-mount chip-scale package (CSP) that measures 1.5 x 1.5 x 0.9 mm and is suitable for 5G, amplitude matching, test equipment, high channel count systems, and airborne applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 5G Open-Radio Unit for O-RAN Deployments | |
Integrated Microwave Assembly
from AmpliTech
|
| The A1001-RU-1 from AmpliTech is a 5G Open-Radio Unit (O-RU) for n78 band from 3.55 to 3.7 GHz. It utilizes GaN power amplifiers along with 64 phased array elements for digital beamforming. This O-RU consists of three main parts: the first is the Radio Frequency Processing Unit (RFPU) which includes the antennas, high power amplifiers, low noise amplifiers, duplexers, and other functions. |
| |
Download Datasheet
Product Details | |
|
|
|
| MIPI-Controlled SP4T Switch from 0.04 to 7.125 GHz for 5G/LTE Applications | |
RF Switch
from Infineon Technologies
|
| The BGS14M8U9 from Infineon is an SP4T Switch that operates from 400 MHz to 7.125 GHz. It has a switching speed of 1.3 µs and provides an isolation of up to 49 dB. This switch can handle an input power of up to 39 dBm and has an insertion loss of less than 0.9 dB. It is optimized for 5G and other cellular applications and is suitable for 5G and LTE 4G applications, such as 5G SRS, uplink-carrier aggregation and high-power user equipment. |
| |
Download Datasheet
Product Details | |
|
|
|
| 8 W GaN Doherty Power Amplifier Module from 3.4 to 3.8 GHz | |
RF Amplifier
from Qorvo
|
| The QPB3810 from Qorvo is a Doherty Power Amplifier Module that operates from 3.4 to 3.8 GHz. It delivers an output power of 39 dBm (~8 W) and has an integrated bias controller that is factory programmed to set optimal bias points. This 2-stage GaN power amplifier includes a temperature sensor and adjusts bias over temperature along with an enable pin for fast TDD switching. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1 W E-Band GaN Power Amplifier MMIC from 65 to 76 GHz | |
RF Amplifier
from Nxbeam Inc
|
| The NPA7000-DE from Nxbeam is a Power Amplifier MMIC that operates in the E-band from 65 to 76 GHz. It delivers a saturated output power of 1 W with a linear gain of 13 dB and a power-added efficiency (PAE) of up to 32%. This amplifier is developed on a 0.09um GaN HEMT on the SiC process and requires a drain supply from 10 to 20 V. |
| |
Download Datasheet
Product Details | |
|
|
|
| Antenna Measurement System from 650 MHz to 50 GHz for 5G Test Applications | |
Antenna Measurement System
from Microwave Vision Group
|
| The StarLab 50 GHz from MVG World is an Antenna Measurement System for 5G test applications that provides frequency measurements from 650 MHz to 50 GHz. Its spherical near-field measurement capabilities provide flexibility in types of antennas that can be tested, from low to high directivity. The patented multi-probe electronic scanning technology and oversampling capabilities limit mechanical movement. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Sub-6 GHz 5G-NR Mobile Device Test Platform from 450 MHz to 6 GHz | |
RF Test Set
from Anritsu
|
| The ME7834NR from Anritsu is a 5G NR Mobile Device Test Platform that operates from 450 MHz to 6 GHz. It has been designed to perform 3GPP based Protocol Conformance Tests (PCT) and Carrier Acceptance Testing (CAT) of mobile devices incorporating Multiple Radio Access Technologies (RAT). This test platform supports 5G New Radio (NR) technology in both Standalone and Non-Standalone mode. |
| |
Download Datasheet
Product Details | |
|
|
|
| Real-Time Spectrum Analyzer from 9 kHz to 27 GHz | |
RF Spectrum Analyzer
from ThinkRF
|
| The R5550 from thinkRF is a Real-Time Spectrum Analyzer that is built on innovative and highly optimizable software-defined radio technologies to provide more flexibility, greater coverage, and increased functionality. Designed and built for spectrum monitoring and deployment applications, the thinkRF R5550 Real-Time Spectrum Analyzer provides improved spectral performance in a lightweight, fanless, and portable form factor while enabling in-depth analysis of complex and wideband waveforms in challenging spectrum environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| Sub-6 GHz Transparent Antenna for 5G/4G Cellular Applications | |
Antenna
from Taoglas
|
| The TFX62.A from Taoglas is a Transparent 5G/4G Cellular Antenna that operates from 600 to 6000 MHz. This 'invisible' linearly polarized antenna has an omnidirectional radiation pattern and provides a peak gain of 4.65 dBi with an efficiency of up to 60%. It can be used as an alternative to standard flexible PCB antennas where the antenna is to be installed in a covert area or on a surface that needs to be kept visible. |
| |
Download Datasheet
Product Details | |
|
|
|
| Sub-6 GHz Flexible Embedded Antenna for LTE/5G Applications | |
Antenna
from KYOCERA AVX
|
| The 9003034F0 from KYOCERA AVX is a Flexible Embedded Antenna that operates from 2100 – 2690 MHz and 3300 – 5000 MHz. This linearly polarized antenna provides a peak gain of 4.3 dBi with an efficiency of up to 62%. It has been optimized for 5G sub-6GHz 4x4 MIMO systems. This antenna is designed to provide flexible mounting on the underside of any non-metallic housing with a cable and connector for easy installation. |
| |
Download Datasheet
Product Details | |
|
