PREV 15 April, 2024 NEXT

Latest News & White Papers this Week

15 April, 2024 Newsletter - everything RF

Top stories this week. View it in your browser

 
Weekly Edition
Date: 15 April, 2024
 
Sponsored by Mouser
 
 
Latest News this Week
New Inline Power Sensor Measures Peak and True-RMS Average Power from 25 MHz to 1 GHz - Anritsu
AmpliTech Introduces Ultra-Low Noise Block with 80K Noise Temperature for Ka-Band SATCOM Applications - AmpliTech, Inc.
SAG has Developed a Range of Robust RFID Tag Solutions for Industrial Applications - SAG
SV Microwave Introduces Reflow Stable PCB Connectors with Glass Seal Capability - SV Microwave
Ignion Launches New AI-powered Antenna Integration and Development Platform - Ignion
Quectel Announces Commercial Availability of its 5G RedCap Sub-6 GHz Module for Global Connectivity - Quectel
Rohde & Schwarz Showcases its Test Solutions for Embedded Systems at Embedded World 2024 - Rohde & Schwarz
Skyworks' Has Produced More than 11 Billion RF Filters Since 2015 - Skyworks Solutions
Fibocom Partners with Qualcomm to Introduce Linux-based Edge AI Solutions at Embedded World 2024 - Fibocom
NIST and its Collaborators Develop Compact Chips that can Convert Light into Microwaves - NIST
Kanders & Company to Acquire Antenna and Test Equipment Business Units from L3Harris Technologies - L3Harris Technologies
MathWorks Updates the Satellite Communications Toolbox as Part of the R2024a Version of MATLAB and Simulink - MathWorks
More News
Sponsored by Mouser
bel-signal-drc-inductors
Unshielded radial drum chokes with through-hole mount components
Signal Transformer / Bel DRC Radial Coil Inductors offer a 1.2µH to 15,000µH inductance range, low DCR, and a -20°C to +85°C operating temperature range. These inductors are commonly used to filter high-frequency signals and mitigate EMI/RFI. Click here to learn more.
New White Papers & Articles
Exploring the World of Software Defined Radio (SDR) - Per Vices
IoT Satellite Connectivity Enabled by Small Ceramic Chip Antennas Case Study - KYOCERA AVX
HARC-TD: Tethered Small UAS Developed and Optimized as a Communications Relay Platform - Syntonics
Technical Approaches to Defend and Protect IoT Nodes - Analog Devices
Implementation of a Combination Planar and Spherical Near-Field Antenna Measurement System using an Industrial 6-Axis Robot - NSI-MI Technologies
More Whitepapers
Upcoming Event
Event Image
CMSE 2024
Date: April 30 - May 2, 2024
Location: Los Angeles, California
More Events
Featured Products this Week .
Vector Network Analyzer
2-Port Metrology Grade Vector Network Analyzer from 300 kHz to 4.5 GHz
Vector Network Analyzer  from Copper Mountain Technologies

The M5045 from Copper Mountain Technologies is a 2-port metrology-grade Vector Network Analyzer that operates from 300 kHz to 4.5 GHz. It delivers metrology-grade performance in a more economical package and as a result excludes several advanced features: vector mixer calibration, TRL calibration, frequency offset, time domain, and gating.
Download Datasheet Product Details
RF Amplifier
40 W Class A/AB Solid-State Power Amplifier from 18 to 40 GHz
RF Amplifier  from Exodus Advanced Communications

The AMP2145C-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 18 to 40 GHz. It delivers a saturated output power of more than 40 W with more than 47 dB of gain and has a gain adjustment range of 20 dB. This amplifier is based on Class A/AB linear design integrating high-power advanced features that offer instantaneous wide bandwidth in a small form-factor.
Download Datasheet Product Details
Termination
10 W Termination from DC to 12.4 GHz
Termination  from MECA

The 410-1 from MECA is a termination that operates from DC to 12.4 GHz. It can handle up to 10 W of average power and a peak power of up to 2 kW. This termination is available in a module that measures 2.50 x 0.64 inches with N-type (M) connectors.
Download Datasheet Product Details
Waveguide Coupler
10 dB, WR-12 Waveguide Coupler from 60 to 90 GHz
Waveguide Coupler  from Marki Microwave

The C10-1200W from Marki Microwave is a Waveguide Coupler that operates from 60 to 90 GHz. This 10 dB coupler provides a directivity of more than 40 dB and has an insertion loss of 1.1 dB. It has a return loss of 35 dB and an amplitude flatness of 1 dB. This coupler is built with high precision and then gold-plated for high corrosion resistance.
Download Datasheet Product Details
Microwave Backhaul Radio Links
Backhaul Radio Link from 3470 to 3680 MHz for 5G-NR Band n78 Applications
Microwave Backhaul Radio Links  from AGTGSS

The Band N78 8T8R Macro Cell from AGTGSS is a Microwave Backhaul Radio Link that operates from 3470 to 3680 MHz. It has a bandwidth of up to 210 MHz and supports one 100 MHz or two 50 MHz carriers. This radio supports TDD duplexing mode and 8T8R MIMO with up to 256QAM modulation. It has an internal antenna and also supports external antennas.
Download Datasheet Product Details
Front End Module
860 to 930 MHz RF Front-End Module
Front End Module  from Skyworks Solutions

The SKY66423-11 is a highly integrated RF front-end module designed for high-power Industrial, Scientific, Medical (ISM) band applications operating in the 860 to 930 MHz frequency range. It is designed for ease of use and maximum flexibility with fully matched 50 Ohm TX, RX inputs and antenna outputs. It also has digital controls compatible with 1.6 to 3.6 V CMOS levels.
Download Datasheet Product Details
Sponsored by Mouser
 
 
Front End Module
RF Front End Module for Bluetooth, Thread & Zigbee
Front End Module  from Nordic Semiconductor

The nRF21540 from Nordic Semi is an RF front end module for Bluetooth Low Energy, Bluetooth mesh, Thread & Zigbee range extension and other 2.4 GHz Applications. This FEM consists of a Power Amplifier, Low Noise Amplifier and two switches that connect to two separate antenna ports. It improves the range and connection robustness of Nordic Semi's portfolio of short-range wireless modules/SOCs (nRF52 and nRF53 Series).
Download Datasheet Product Details
Wireless Chipset
Ultra-low Power SoCs for Thread, Matter, and Enhanced BLE 5.4
Wireless Chipset  from Atmosic Technologies

The ATM34/e Series from Atmosic Technologies are Multi-Protocol System-on-Chips (SoCs) that have been designed for ultra-low power end IoT devices such as sensors and switches. They support IEEE 802.15.4-based protocols including Thread and Matter, and enhanced Bluetooth Low Energy (BLE) for the latest 5.4 standard revision.
Download Datasheet Product Details
RF & Microwave Isolator
2 W Coaxial Isolator 27 to 31 GHz
RF & Microwave Isolator  from JQL Electronics

The JIC27K0T31K0K0 from JQL Technologies is a Coaxial Isolator that operates from 27 to 31 GHz. It provides an isolation of more than 19 dB and has an insertion loss of less than 0.7 dB. The isolator can handle a forward power of 2 W and a reverse power of 1 W. It is available in a module that measures 12.7 x 12.7 x 16.0 mm with coaxial connectors.
Download Datasheet Product Details
Limiter
100 W MMIC Power Limiter from 10 MHz to 6 GHz
Limiter  from Teledyne e2v HiRel Electronics

The TDLM06100 from Teledyne e2v HiRel Electronics is an RF Power Limiter that operates from 10 MHz to 6 GHz. It can handle up to 50 dBm of pulsed input power, has a P1dB of up to 13 dB and leakage power of less than 16.8 dBm. The device has an insertion loss of less than 1.2 dB, a response time of 0.6 ns, and a recovery time of 1 ns.
Download Datasheet Product Details
Band Pass Filter
10 W Cavity Filter with a Center Frequency of 10 GHz
Band Pass Filter  from Smiths Interconnect

The 8IZ7-10000/2000-S from Smiths Interconnect is an X-Band RF Cavity Filter with a center frequency of 10.00 GHz. It has a passband bandwidth of more than 2.00 GHz with an insertion loss of less than 0.68 dB and offers an attenuation of more than 50 dBc in the stopband. This cavity filter can handle an input power of 10 W.
Download Datasheet Product Details
Antenna Measurement System
Multi-Probe Antenna Measurement System from 400 MHz to 6 GHz
Antenna Measurement System  from Microwave Vision Group

The SG 24 from MVG is a Multi-Probe Antenna Measurement System for frequencies from 400 MHz to 6 GHz (extendable to 10 GHz). It has a dynamic range of 70 dB (from 0.4 – 6 GHz) and a measurement time of approximately 1 minute. This antenna measurement system uses near-field/spherical or far-field technology to measure parameters such as gain, directivity, beamwidth, cross-polar discrimination, sidelobe levels, front-to-back ratio, 1D, 2D and 3D radiation patterns, radiation pattern in any polarization (linear or circular), and more.
Download Datasheet Product Details
RF Spectrum Analyzer
High-Resolution Signal and Spectrum Analyzer from 2 Hz to 50 GHz
RF Spectrum Analyzer  from Rohde & Schwarz

The R&S FSW50 from Rohde & Schwarz is a Signal and Spectrum Analyzer with a frequency range from 2 Hz to 50 GHz. It has been designed for demanding mission-critical, military, and defense environments. This analyzer has a wide internal bandwidth, which helps it to characterize wideband components and communication systems.
Download Datasheet Product Details
RFID Tag IC
RAIN RFID Tag Chips for Large-Scale Enterprise IoT Deployments
RFID Tag IC  from Impinj

The M800 Series from Impinj are RAIN RFID Tag Chips that meet the increasing demands of large-scale enterprise solutions. They have low power requirements and excellent readability that allows them to be used across a broad range of items ranging from apparel, electronics, sporting goods, and home goods, to other general merchandise.
Download Datasheet Product Details
SATCOM Antenna
Airborne, Electronically Steerable SATCOM Antenna from 10.7 to 14.5 GHz
SATCOM Antenna  from Get SAT Ltd

The Lesa Blade Ku Aero from Get SAT is an Airborne SATCOM Antenna that operates from 10.7 to 12.75 GHz (Rx) and 13.75 to 14.5 GHz (Tx). This low-profile fully electronically steerable antenna (ESA) has no moving parts and is ideal for integration on any aviation platform. It is designed for in-flight connectivity with a short acquisition time and allows for high dynamic tracking.
Download Datasheet Product Details
OCXO
10 MHz Ultra-Low Noise Surface-Mount OCXO
OCXO  from AXTAL

The AXIOM145ULN from AXTAL is an Ultra-Low Noise 10 MHz Oven-Controlled Crystal Oscillator (OCXO). It provides a sinewave output with a phase noise of -163 dBc/Hz (at 1 kHz offset) and has a frequency stability (vs operating temperature range) of ±25 ppb. This OCXO has a warm-up time of less than 5 minutes and includes an Enable and Oven Alarm (OA) pin for protection.
Download Datasheet Product Details
OCXO
Low Phase Noise OCXO from 10 to 120 MHz for Cellular Applications
OCXO  from Dynamic Engineers

The OCXO2525AX from Dynamic Engineers is an OCXO that operates from 10 to 120 MHz. It provides a Sinewave or CMOS/TTL output waveforms with a frequency stability of ±20 ppb (vs. temperature) and a phase noise of -145 dBc/Hz (at 1 kHz offset). This OCXO is designed for applications where exceptional frequency stability and timing are required.
Download Datasheet Product Details
RF Transistor
800 W LDMOS Power Transistor from 1 to 650 MHz
RF Transistor  from Ampleon

The ART800PE from Ampleon is an LDMOS RF Power Transistor that operates from 1 to 650 MHz. It delivers an output power of 800 W with a power gain of 29.2 dB and a drain efficiency of 77%. This transistor is based on advanced rugged technology (ART) and has been designed to cover a wide range of applications for ISM, broadcast, and communications.
Download Datasheet Product Details
Switch Matrix
Non-Blocking 32x32 Switch Matrix from 0.5 to 30 MHz
Switch Matrix  from Leonardo DRS

The SI-9332 from Leonardo DRS is a 32x32 Switch Matrix that operates from 0.5 to 30 MHz. It allows 32 inputs to be connected to 32 outputs with an isolation of 50 dB between ports. This non-blocking switch matrix automatically attenuates the RF output power when very large RF inputs are applied, and the input circuitry protects from high-voltage transients and nearby lightning strikes.
Download Datasheet Product Details
Tunable Filter
X-Band Electronically Tunable Filter from 8 to 10 GHz
Tunable Filter  from Nanowave Technologies

The NWETF8010-10 from Nanowave Technologies is an X-Band Electronically Tunable Filter with center frequencies from 8 to 10 GHz. It allows the center frequency to be adjusted electronically and has an adjustable 3 dB bandwidth from 10 to 100 MHz. Both the bandwidth and frequency of the filter can be electronically controlled in frequency steps of less than 1 MHz.
Download Datasheet Product Details
RF Transceiver
Mixed Signal Front-End Transceiver for 5G mmWave Applications
RF Transceiver  from Analog Devices

The AD9088 from Analog Devices is a Highly Integrated Mixed Signal Front-End Transceiver. It is well suited for applications that require both wideband ADCs and DACs to process signal (s) having wide instantaneous bandwidth. This front-end consists of a 16-bit DAC with a sampling rate of 16 Giga Samples per second (GSPS) and a 12-bit ADC with a sampling rate of 8 GSPS. It integrates eight transmit and receive channels and also supports a bypass mode that allows full bandwidth capability of the ADC and/or DAC cores to bypass the DSP datapaths.
Download Datasheet Product Details
Antenna
2-Port In-Building DAS Antennas from 617 to 8500 MHz
Antenna  from Sinclair Technologies

The SI500A Series from Sinclair are 2-port In-Building DAS Antennas that operate from 617 to 8500 MHz. These linear-horizontally-polarized antennas provide 5 dBi of gain and have a VSWR of less than 2.2:1. They offer port-to-port isolation of more than 30 dB and can handle up to 50 W of input power per port.
Download Datasheet Product Details
Base Station Antenna
Tri-Sector Antenna from 698 to 2690 MHz with Internal RET
Base Station Antenna  from GAMMA NU, INC

The DO15X65V12D18TRI from Gamma nu is an 18-port Tri-Sector Antenna that operates from 698 to 960 MHz and 1710 to 2690 MHz. This ±45° polarized antenna provides a gain of up to 16.8 dBi and has a VSWR of 1.5:1. It has an azimuth beamwidth from 63° to 74° and a vertical beamwidth from 4.8° to 11.5° and supports an electrical down-tilt from 2° to 12°.
Download Datasheet Product Details
PIM Analyzer
700 MHz Portable 2-Port PIM Analyzers
PIM Analyzer  from Kaelus

The iXA Series from Kaelus are 2-Port Passive Intermodulation (PIM) Analyzers with Tx Frequency Range from 728 to 764 MHz and an Rx frequency range from 692 to 800 MHz. They support multiple test scenarios such as testing at the top of the tower, the base of the tower, the rooftop, in-building for DAS systems, and external PIM findings.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide users with the latest news, information on new product releases, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]