| New RF and Microwave Products this Week . |
|
|
|
|
|
|
|
| 1-Port USB Vector Network Analyzer from 1 MHz to 6 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The R60 is a single port USB-powered VNA (Reflectometer) capable of measuring S11 from 1 MHz to 6.0 GHz. It can be operated from any Windows PC or laptop using a USB cable. The R60 provides a wide variety of analysis capabilities, including S11, time-domain with gating, DTF measurements and much more. Collection of metrology-grade S-parameters test results can be achieved manually or through automation in Python, MATLAB, Excel, C++, VB.NET, or LabVIEW. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Multi-Configuration PXI/PXIe Microwave Multiplexers from 8 to 40 GHz | |
PXI RF Multiplexer
from Pickering Interfaces
|
| The 40/42-788 Family from Pickering Interfaces are PXI/PXIe Microwave Multiplexers with a frequency range from 8 to 40 GHz. They are available in versatile switching configurations with single or dual SP8T, SP10T or SP12T multiplexers with 50-ohm terminated and unterminated versions. This family of multiplexers consists of the 40-788-011 (PXI) and 42-788-011 (PXIe) units. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| AEC-Q200 Grade 1 Air Core Inductors from 1.65 to 12.55 nH | |
RF Inductor
from Coilcraft
|
| The Micro Spring™ 1606 Series from Coilcraft are Air Core Inductors with inductance values from 1.65 to 12.55 nH. They have high Q factors and tight inductance tolerances, making them suitable for narrowband RF amplifier matching and tuning applications. These inductors do not use a magnetic core, resulting in high Q and low losses for high-frequency applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rugged 12.5 W Power Amplifier from 0.02 to 6 GHz | |
RF Amplifier
from ERZIA
|
| The ERZ-HPA-0002-0600-42 from ERZIA is a Power Amplifier that operates from 0.02 to 6 GHz. It delivers a saturated output power of 12.5 W (~41 dBm) with a small signal gain of more than 40 dB and a gain flatness of ±2 dB. This amplifier requires a DC supply of 24 V and consumes 80 W of power. It is available in a compact nickel-plated Aluminum housing module that measures 160 x 115 x 23 mm with SMA-female connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| Standalone Bluetooth 5.4 LE Modules for Ultra-Low Power IoT Applications | |
RF Module
from u-blox AG
|
| The NORA-B20 Series from u-blox are Standalone Bluetooth 5.4 Low Energy Modules that support Thread, Zigbee, Matter and NFC 802.15.4 protocols. They are based on Nordic Semiconductor's nRF54L15 chip as an open CPU solution where customer applications run on a 128 MHz Arm Cortex-M33 processor. These modules support Bluetooth 5 features such as Angle-of-Arrival (AoA), Angle-of-Departure (AoD) and Bluetooth long-range communication (CODED PHY). |
| |
Download Datasheet
Product Details | |
|
|
|
| 4G LTE Cat-1 bis IoT Module for EMEA and APAC Regions | |
Cellular Module
from Sierra Wireless
|
| The RC7120 from Sierra Wireless is an IoT Module that is optimized for 4G LTE Cat-1 bis applications. This fully integrated solution combines power efficiency with device-to-cloud security, making it fully optimized for cost-conscious IoT devices. It supports Dual SIM single standby (DSSS) for switching between networks quickly to stay connected. |
| |
Download Datasheet
Product Details | |
|
|
|
| IP68-Rated, On-Metal RFID Tag for Industrial Applications | |
RFID Tag
from SAG
|
| The On-Metal Stick Tag-PPS from SAG is an RFID Tag that operates in the High Frequency (HF) band and is based on the NXP ICODE SLIX chip with support for ISO/IEC 15693 RF interface protocol. This tag is resistant to strong environmental impacts such as high temperature and chemical exposure, making it ideal for industrial-purpose applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
| 10 dB, WR-12 Waveguide Coupler from 60 to 90 GHz | |
Waveguide Coupler
from Marki Microwave
|
| The C10-1200W from Marki Microwave is a Waveguide Coupler that operates from 60 to 90 GHz. This 10 dB coupler provides a directivity of more than 40 dB and has an insertion loss of 1.1 dB. It has a return loss of 35 dB and an amplitude flatness of 1 dB. This coupler is built with high precision and then gold-plated for high corrosion resistance. |
| |
Download Datasheet
Product Details | |
|
|
|
| 250 W LDMOS Power Transistor from 1 to 1300 MHz | |
RF Transistor
from Polyfet RF Devices
|
| The LS2641 from Polyfet RF Devices is an LDMOS Power Transistor that operates from 1 to 1300 MHz. It delivers a saturated output power of 250 W with a power gain of more than 16 dB and has a drain efficiency of better than 60%. This transistor employs back-to-back gate diodes for enhanced ESD protection and has a high drain breakdown voltage which makes this LDMOS highly rugged. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Noise Amplifier from 3 to 9 GHz for 5G Massive MIMO Applications | |
RF Amplifier
from Guerrilla RF
|
| The GRF2584 from Guerrilla RF is a Low Noise Amplifier (LNA) that operates from 3 to 9 GHz. It provides a gain of up to 36.5 dB with a noise figure of less than 1.4 dB and has an output P1dB of 17 dBm. This LNA is fabricated on a GaAs pHEMT process and is designed for high-performance wireless infrastructure applications. It requires a DC supply from 2.7 to 5 V and consumes 50 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 75-Ohm CATV Amplifier from 5 to 1218 MHz | |
RF Amplifier
from Qorvo
|
| The QPL7425 from Qorvo is a CATV Amplifier that operates from 5 to 1218 MHz. It provides 25 dB of gain with a noise figure of 1 dB and has an output P1dB of 21 dBm. This 75-ohm amplifier provides reverse isolation of 27 dB. It requires a DC supply of 5 V and consumes 60 mA of current or a DC supply of 8 V consuming 90 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6.2 GHz Wi-Fi 6E and Wi-Fi 7 Coexistence BAW Filter | |
Band Pass Filter
from Akoustis
|
| The A10162 from Akoustis is a Wi-Fi 6E and Wi-Fi 7 Coexistence BAW Filter. It has a center frequency of 6.2 GHz and a bandwidth of 480 MHz covering U-NII-5. This filter utilizes Akoustis’ patented, XBAW technology and has single-ended Tx/Rx ports which can handle exceptionally high power necessary for demanding power requirements of the latest Wi-Fi 6E and 7 standards. |
| |
Download Datasheet
Product Details | |
|
|
|
| Test & Measurement Instrumentation Power Amplifier from 26.5 to 40 GHz | |
RF Amplifier
from Maury Microwave
|
| The MPA-26G5-40G-100 from Maury Microwave is a GaN Power Amplifier that operates from 26.5 to 40 GHz. It delivers a saturated CW output power of 100 W with a small signal gain of more than 50 dB. This instrumentation amplifier is burn-in, and aging tested for high reliability which includes prolonged storage under extreme temperature conditions, extended amplifier operation over the entire rated temperature range, and elongated usage at maximum power under CW and pulsed-CW conditions. |
| |
Download Datasheet
Product Details | |
|
|
|
| Direction-finding and Tracking Antenna from 2 to 40 GHz | |
Direction Finding Antenna
from Aaronia AG
|
| The IsoLOG® 3D DF 16-20400 from Aaronia is a 3D Ultrawideband Direction-finding and Tracking Antenna that operates from 2 to 40 GHz. These patented 3D DF antenna IsoLOG® 3D DF provide real 3D bearing including altitude and elevation. This unique functionality can give the bearing of flying transmitters (drones, airplanes etc.) and their 3D display in space. |
| |
Download Datasheet
Product Details | |
|
|
|
| Automatic Direction-Finding Antenna from 10 MHz to 8 GHz | |
Direction Finding Antenna
from Narda Safety Test Solutions
|
| The 3361/01 from Narda Safety Test Solutions is an Automatic Direction-Finding Antenna (ADFA) that operates from 10 MHz to 8 GHz. This vertically polarized antenna has a VSWR of 2:1 and a return loss of 10 dB. It has a direction finding (DF) accuracy of 1.5° (RMS) and a DF sensitivity of 1-2 µV/m. This omnidirectional antenna can be integrated with a real-time handheld analyzer (SignalShark) to cover a wide frequency range with the highest sensitivity. |
| |
Download Datasheet
Product Details | |
|
|
|
| High Pass Filter with a Passband from 8 to 22 GHz | |
RF High Pass Filter
from Quantic PMI (Planar Monolithics)
|
| The HP8G-7D8G-CD-SMF from Quantic PMI is a High Pass Filter with a passband from 8 to 22 GHz. It has a cut-off frequency of 7.8 GHz (at 3 dB) and passband insertion loss of less than 1.5 dB. This filter has a passband ripple of less than 0.5 dB (peak-to-peak) and a rejection of 35 dB outside the passband. It can handle a CW input power of 5 W and has a passband VSWR of less than 2.0:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| Bi-directional Amplifier System for 700/800 MHz and FirstNet Bands | |
RF Amplifier
from TX RX Systems
|
| The DS038877-1 from TX RX Systems is a Bi-directional Amplifier (BDA) System that operates across the 700 and 800 MHz bands, including the FirstNet band. It delivers an output power of 2 W with a gain of up to 90 dB and has a gain adjustment range of 30 dB. This BDA allows passbands to be turned ON/OFF independently and supports independent power and gain control per band. |
| |
Download Datasheet
Product Details | |
|
|
|
| Power Amplifier from DC to 40 GHz | |
RF Amplifier
from RF-Lambda
|
| The RFLUPA00M40GA from RF Lambda is a Power Amplifier that operates from DC to 40 GHz. It delivers a saturated output power of 25.3 dBm with a small signal gain of 14.8 dB. This requires a DC supply of 12 V and consumes 330 mA of current. It is available in a module (hermetic sealing option available) that measures 68.0 x 108.0 x 36.7 mm and has 2.92mm (female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| Handheld Spectrum Analyzer from 9 kHz to 54 GHz | |
RF Spectrum Analyzer
from Anritsu
|
| The Field Master Pro MS2090A from Anritsu is a RF handheld spectrum analyzer that operates up to 54 GHz and has a real-time spectrum analysis bandwidth of up to 100 MHz. It has a Displayed Average Noise Level (DANL) of less than -160 dBm and Third Order Intercept (TOI) of +20 dBm, for more accurate spectrum clearing, radio alignment, and harmonic and distortion measurements. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3 to 60 dB Fixed Attenuators from DC to 18 GHz | |
Fixed Attenuator
from Qualwave
|
| The QFA18K2 Series from Qualwave are Fixed Attenuators that operate from DC to 18 GHz. They are available in attenuation values of 3, 6 and 10, 20, 30, 40, 50 and 60 dB. These attenuators can handle an average power of up to 200 W and peak power of 5 KW (5 µS pulse width, 2% duty cycle at DC~12.4 GHz) with a VSWR of less than 1.45. |
| |
Download Datasheet
Product Details | |
|
|
|
| Waveguide Power Amplifier from 110 to 170 GHz | |
RF Amplifier
from AT Microwave
|
| The AT-PA-110170-2018 from AT Microwave is a Power Amplifier that operates from 110 to 170 GHz. It delivers a saturated output power of +18 dBm with a gain of 20 dB. This amplifier requires a DC supply of +12 V and consumes less than 0.36 A of current. It is available in a module that measures 50 x 40 x 20 mm with a standard WR-06 waveguide interface. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4/5/6 GHz WLAN (Wi-Fi) and Bluetooth® Device Testing Set | |
RF Test Set
from NOFFZ Technologies
|
| The IoT Test Node ITN 1000 from NOFFZ Technologies is a WLAN (Wi-Fi) and Bluetooth® Device Testing tool. It is suitable for 2.4/5/6 GHz Wi-Fi 6E (802.11ax), 2x2 MIMO, and Bluetooth® 5.2 BDR/EDR/BLE standards. This testing tool is designed for automated testing and can be used for development, prototyping, validation and production testing of wireless devices. |
| |
Download Datasheet
Product Details | |
|
