1. everything RF
  2. RF Newsletters
more
PREV 16 March, 2016 NEXT

Product Update - 16 March, 2016

16 March, 2016 - everything RF Newsletter
 
everything RF
Date: 16 March, 2016
 
Sponsored by Inmet (API Technologies)
 
 
 
New RF & Microwave Products this Week
RF Transistor
High Efficiency LDMOS RF Transistor for Doherty Applications

RF Transistor from Ampleon

The BLF888E from Ampleon is an RF power transistor designed for DVB-T UHF asymmetrical wideband Doherty amplifier applications. This LDMOS transistor provides 150 watts of power with an effeciency over 50%, making this one of the highest power levels available from a single transistor for such broadcast applications.
 
Download Datasheet | Product Details
 
Omni-Directional Antenna
Penta-band Flexible Antenna for Cellular, 3G and MIMO

Omni-Directional Antenna from Antenova

The SRFC011 from Antenova is a flexible printed circuit (FPC) board antenna that has been designed for 3G applications including MIMO systems. It is available in a small form factor and measures only 30 x 28.5 x 0.15 mm, making it ideal for small devices where space is an issue. The antenna operates from 824 MHz to 2170 MHz and covers: GSM 850/900, DCS 1800, PCS 1900 and WCDMA 2100.
 
Download Datasheet | Product Details
 
RF Amplifier
57 to 66 GHz Power Amplifier for WiGig Development

RF Amplifier from HXI

The HHPAV-548 is a 57 to 66 GHz Power Amplifier that can be used for point to point radios, radar transmitters and WiGig development. This amplifier provides a P1dB of 21 dBm, small signal gain of 30 dB and a noise figure under 5.5 dB. It requires a 6 V DC supply and draws 850 mA of current. The amplifier is available in a package with WR-15 waveguide interface and UG-385/U flange.
 
Download Datasheet | Product Details
 
Block Up Converter
250 Watt Ku-Band BUC and SSPA for TWTA Replacement

Block Up Converter from Norsat

The ATOMBKU250 from Norsat is a Block Up Converter Series for the Ku-Band. It accepts an input frequency from 950 MHz to 1450 MHz and up-converts it to 12.25-18 GHz. The BUC has a compression gain of 60 dB and provide an output power (Psat) of 250 Watts. It has a Waveguide WR-75 Output Interface and N Type input connector.
 
Download Datasheet | Product Details
 
RF Amplifier
2000 W Peak Power Ku-Band Antenna Mount Power Amplifier

RF Amplifier from Comtech Xicom Technology

The XTD-2000KHE from Comtech Xicom Technology is a Ku-band antenna mount power amplifier than operates from 13.75 GHz to 14.5 GHz. The amplifier provides up to 850 Watts of CW power and peak power of up Toi 1775 Watts. It has a gain of 70 dB, intermodulation distortion of -26 dBc at 755 W, noise power ratio of -19 dB at 705 W and high efficiency.
 
Download Datasheet | Product Details
 
Sponsored by Inmet (API Technologies)
API Technologies - Inmet
Meet the New Magic Number for 2 Watt Temperature Variable Attenuators
Push the limits of frequency without sacrificing performance. Aeroflex/Inmet’s new DC to 12 GHz Powerfilm surface mount attenuators vary with temperature and are the perfect balance of price, power, and dependability. To learn more, download the data sheet.
 
 
 
Power Divider
2 Way Surface Mount Power Divider/Combiner

Power Divider from Werlatone Inc

The D9922 from Werlatone is a 2-way surface mount divider/combiner that operates from 2 GHz to 6 GHz. It can handle up to 200 W of CW power with full port-to-port isolation of over 15 dB and an insertion loss of 0.35 dB. The divider measures 1.4 x 1.1 x 0.14 inches. It can be used in harsh military and commercial environmental conditions.
 
Download Datasheet | Product Details
 
Directional Coupler
10 dB, Directional Coupler from 12.4 GHz to 18 GHz

Directional Coupler from UMCC

The DC-G000-10S from UMCC is a directional coupler that operates from 12.4 GHz to 18 GHz. It has 10 dB coupling with a directivity of 12 dB, insertion loss of 1.4 dB and VSWR of 1.45:1. The coupler can handle up to 10 W of CW power and is matched to 50 Ohms. It is available with SMA Female connectors.
 
Download Datasheet | Product Details
 
Termination
4.1/9.5 Female, 2 Watts Termination from DC to 4 GHz

Termination from MECA

The 412-15WWP is a 4.1/9.5 Female termination that operates from DC to 4 GHz. It is matched to 50 ohms and has a VSWR under 1.30:1. The termination can handle 2 watts of average power and up to 250 watts of peak power. It has a brass, silver plated 4.1/9.5 female connector and contact pin.
 
Download Datasheet | Product Details
 
RF Amplifier
2 GHz to 9 GHz Driver Amplifier Die

RF Amplifier from Custom MMIC

The CMD232 is a wideband MMIC driver amplifier that operates from 2 GHz to 9 GHz. It provides a gain of 15 dB with a corresponding output P1dB of 17 dBm and an output IP3 of 23 dBm. The device is available as a die and requires a single positive supply of 6V. It is matched to 50 ohms, which eliminates the need for external DC blocks and RF port matching. Itisfully passivated with increased reliability and moisture protection.
 
Download Datasheet | Product Details
 
RF Amplifier
High Directivity MMIC Amplifier from 1.5 GHz to 6 GHz

RF Amplifier from Mini Circuits

The MNA-7A+ is a wideband PHEMT based MMIC amplifier that operates from 1.5 GHz to 6 GHz. It has an integrated matching network (50 ohms) and bias circuitry inside the package, reducing the need for external circuits. The amplifier provides 17.4 dBm of power and has a high directivity of 18-38 dB.
 
Download Datasheet | Product Details
 
RF Amplifier
0.01 to 1.1 GHz GaN Power Amplifier

RF Amplifier from Analog Devices

The HMC1099 from Analog Devices (Hittite) is a GaN broadband power amplifier that operates from 0.01 GHz to 1.1 GHz. It provides saturated power (Psat) of 40.5 dBm, PAE of 69 % and a small signal gain of 18.5 dB. The amplifier requires a 28 V power supply and draws 100 mA of current.
 
Download Datasheet | Product Details
 
RF Amplifier
0.6 to 4.2 GHz Ultra Low Noise Amplifier

RF Amplifier from Qorvo

The TQL9093 from TriQuint is a high-linearity, low noise amplifier that operates from 0.6 GHz to 4.2 GHz. This LNA can be used fordefense communications, mobile infrastructure, DAS, repeaters and FDD/TDD applications. It provides 20 dB of gain, 41.5 dBm OIP3, and has a noise figure of 0.67 dB, The amplifier draws 120 mA current from a 5V supply.
 
Download Datasheet | Product Details
 
RF Connector
N Type - Female / Jack 6 GHz Connector

RF Connector from Amphenol Connex

The 172386 from Amphenol Connex is a coaxial connector that operates from DC to 6 GHz. It has an insertion loss of less than 0.3 dB, VSWR of 1.2:1 and a breakdown voltage of 2500 V RMS. The connector has a brass, white bronze plating, a PTFE insulator and is matched to 50 Ohms.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
Multi-touch Signal Analyzer from 10 Hz to 26.5 GHz

RF Spectrum Analyzer from Keysight Technologies

The N9020B MXA Signal Analyzer operates from 10 Hz to 26.5 GHz (Mixers to 1.1 THz) with a 160 MHz analysis bandwidth. The analyzer has DANL of -166 dBm, phase noise of less than -114 dBc/Hz at 10 kHz offset and a dynamic range 3rd order of over 116 dB. It shortens test times with hardware-accelerated power measurements and has a multi-touch display.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.