PREV 10 July, 2024 NEXT

New RF and Microwave Products this Week

10 July, 2024 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 10 July, 2024
 
Sponsored by DigiKey
 
 
New RF and Microwave Products this Week .
Fixed Attenuator
100 W Flanged Attenuator from DC to 2.5 GHz
Fixed Attenuator  from Inmet by Spectrum Control

The 2ANA100 from Spectrum Control is a Flanged Attenuator that operates from DC to 2.5 GHz. It is available in attenuation levels of 3, 20 & 30 dB with an accuracy of +0.75/-1.75 dB. This attenuator can handle an average power of 100 W and has a VSWR of less than 1.25:1. It has an Aluminum Nitride  (AlN) ceramic substrate and proprietary thick film resistor material.
Download Datasheet Product Details
Power Divider
6-Way Resistive Power Divider from DC to 7.2 GHz
Power Divider  from Werbel Microwave

The WMRD06-7.2-S from Werbel Microwave is a 6-way Resistive Power Divider that operates from DC to 7.2 GHz. It can handle a CW input power of up to 1 W, provides more than 9.5 dB of isolation, and has a total measured loss of less than 17.8 dB. This RoHS-compliant power divider has a flat frequency response in a small radial package.
Download Datasheet Product Details
Directional Coupler
30 dB Directional Coupler from 500 MHz to 20 GHz
Directional Coupler  from KRYTAR

The 152030 from KRYTAR is a Directional Coupler that operates from 500 MHz to 20 GHz. It has a coupling factor of 30 dB and a directivity of more than 10 dB. It can handle an input power of 20 W (average) and a peak input power of 3 kW with a VSWR of less than 1.35:1. This directional coupler has an insertion loss of less than 1.35 dB and frequency selectivity of ± 1.8 dB.
Download Datasheet Product Details
RF Amplifier
7 W GaN Power Amplifier Module from 2 to 18 GHz
RF Amplifier  from AMCOM Communications, Inc.

The AM02018038MD-3H from AMCOM Communications is a GaN Power Amplifier Module that operates from 2 to 18 GHz. It delivers a saturated output power of 38.5 dBm (~7 W) with a small signal gain of 30 dB. This GaN power amplifier requires a DC supply from 32 to 36 V and consumes 1.9 A of current. It can be turned ON/OFF with TTL control logic and has built-in temperature monitoring capabilities with thermal shutdown at greater than 95 Degrees C.
Download Datasheet Product Details
RF Amplifier
87 W Doherty Power Amplifier from 3400 to 3600 MHz
RF Amplifier  from NXP Semiconductors

The A5M35TG040-TC from NXP Semiconductors is a Doherty Power Amplifier that operates from 3400 to 3600 MHz. It is a 2-stage module that includes an LDMOS integrated circuit as a driver and a GaN final stage amplifier. The amplifier delivers a Pulsed CW power of 49.4 dBm(~87 W) with a gain of 30.5 dB and a power-added efficiency of 47.5%.
Download Datasheet Product Details
Software
Simulation Software for MIMO and Array Design for 5G Antennas
Software  from Remcom

Remcom’s XFdtd EM simulation software enables in-depth analysis of a device's stand-alone performance, with 5G device design features that support high frequency array antennas. This software provides a complete solution, from system and MIMO antenna design through performance assessment in realistic, simulated environments, and planning for deployment in 5G networks.
Download Datasheet Product Details
Sponsored by DigiKey
DigiKey-CityDigital
DigiKey presents: season 4 of City Digital: AI in the Smart World
Season 4 dives into the transformative role of AI in shaping modern cities. It focuses on groundbreaking electronics and hardware innovations that are integrating AI into the urban fabric, enhancing efficiency, sustainability, and quality of life. Click here to learn more.
In Series RF Adapter
0.8 mm In-Series Coaxial Adapter from DC to 145 GHz for Sub-mmWave Testing
In Series RF Adapter  from SHF Communication Technologies

The KPC080MF from SHF Communication Technologies is an In-Series 0.8mm Coaxial Adapter that operates from DC to 145 GHz. It has an insertion loss of 1 dB and a VSWR of less than 1.6:1. This small, low loss adapter and can withstand more than 500 connect/disconnect cycles (roughly) with an operating temperature range from -55°C to +125°C.
Download Datasheet Product Details
RF Plasma Source
RF Plasma Generator from 1 to 60 MHz
RF Plasma Source  from Advanced Energy Industries

The eVerest from Advanced Energy Industries is an RF Plasma Generator that operates from 1 to 60 MHz. It delivers an RF output power of 3.5 to 10 kW and has a power accuracy of ± 1 W or ± 1% of the setpoint. This plasma generator has a pulse state time of 11 µs to 250 ms and a frequency tuning range of up to ±10%. The eVerest RF plasma generator has advanced features like multi-level pulsing, arc management, CEX and MBFT.
Download Datasheet Product Details
RF Amplifier
8 kW Solid-State Power Amplifier from 1 to 2.5 GHz
RF Amplifier  from Exodus Advanced Communications

The AMP2074P-LC-8KW from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 1 to 2.5 GHz. It delivers a saturated pulsed output power of more than 8 kW with a power gain of over 69 dB and gain adjustment range of 20 dB. This amplifier is based on a Class A/AB GaN linear design with high-power advanced features that offer instantaneous wide bandwidth in a small form factor.
Download Datasheet Product Details
RF Amplifier
10 KW TWT Microwave Amplifier from 2.7 to 3.1 GHz
RF Amplifier  from AR RF/Microwave Instrumentation

The 8000TP2z7G3z1 from AR RF/Microwave Instrumentation is a Traveling Wave Tube (TWT) Microwave Amplifier that operates from 2.7 to 3.1 GHz. It delivers peak pulse power of up to  10 kW with a gain of more than 69 dB. This amplifier supports a pulse width ranging from  0.1 to 40 µs, a pulse rate of up to 100 kHz and a duty cycle of less than 1%.
Download Datasheet Product Details
RF Amplifier
Low Noise Cryogenic Amplifier from 6 to 8.5 GHz
RF Amplifier  from AmpliTech

The APTC3-06000850-2K00-D2-V from AmpliTech is a Low Noise Cryogenic Amplifier that operates from 6.0 to 8.5 GHz. It has been designed for cryogenic applications down to 4K, with an industry-low Noise Figure of 25K at +296K and 2K at 4K case temperatures across the band. It provides a more than 40 dB of gain with a noise figure of less than 0.029 dB (at 4 K) and has a P1dB of -6 dBm.
Download Datasheet Product Details
Vector Network Analyzer
2-Port USB Controlled VNA from 300 kHz to 9 GHz
Vector Network Analyzer  from Copper Mountain Technologies

The SC5090 from Copper Mountain Technologies is a modular 2-port compact VNA for 2-path measurements that operates from 300 kHz to 9 GHz. It has a dynamic range of 140 dB, an output power of 15 dBm, and a typical measurement speed of 16 µs per point. The VNA has a directivity of 46 dB and can be used to measure all four S parameters (S11, S21, S12, and S22).
Download Datasheet Product Details
Sponsored by DigiKey
Skyworks Si858x
Skyworks Si858x Isolated RS-485 Transceivers
They feature powerful and fully compliant RS-485 transceivers integrated with Skyworks' exclusive CMOS isolation technology. Theyare perfect for industrial applications requiring isolated interfaces with a fieldbus system like ProfiBus or ModBus. Click here to learn more.
RF Switch
Absorptive SP65T Pin Diode Switch from 100 MHz to 4 GHz
RF Switch  from American Microwave Corporation

The MSN-65DT-051-DEC-MP PT .1-4..NI from American Microwave Corporation is an Absorptive SP65T Pin Diode Switch that operates from 100 MHz to 4 GHz. It can handle an input power (CW) of up to 20 dBm, provides an isolation of more than 40 dB, and has an insertion loss of less than 15 dB. This switch has a switching speed of 150 ns and a rise/fall time of 50 ns.
Download Datasheet Product Details
RF Cable
Semi Rigid Aluminium Cables from DC to 109 GHz
RF Cable  from IntelliConnect

The AL Series from IntelliConnect are Semi-Rigid Aluminium Cables that operate up to 109 GHz. They have a tin-plated aluminium conductor with a diameter range of 0.047 to 0.141 inches and PTFE dielectric with a thickness of 0.17 to 0.066 inches. These 50 ohms cables can be bent into any shape as required, with a bend radius of 0.05 to 0.125 inches.
Download Datasheet Product Details
Power Divider
8-Way Resistive Power Divider from DC to 40 GHz
Power Divider  from Qualwave

The QPD8-0-40000-2-K from Qualwave is an 8-Way Resistive Power Divider that operates from DC to 40 GHz. It can handle an input power of 2 W and has a VSWR of less than 1.60:1. This power divider has an insertion loss of less than 4 dB and an isolation of 18 dB. It has an amplitude balance of ±2 dB and a phase balance of ±2°.
Download Datasheet Product Details
Power Divider
8-Way Power Divider from 118 to 174 MHz
Power Divider  from Broadwave Technologies

The 159-306-008 from Broadwave Technologies is an 8-way Power Divider that operates from 118 to 174 MHz. It can handle an input power of up to 5 W and provides an isolation of more than 20 dB. This power divider has an amplitude balance of ±0.5 dB and a phase balance of ±5°. It is available in a module with an SMA-female input connector and N-type (female) output connectors.
Download Datasheet Product Details
RFID Antenna
13.56 MHz NFC Flex PCB Antenna
RFID Antenna  from Ezurio

The 0600-00061 from Ezurio is a Near Field Communication (NFC) Flex PCB Antenna that operates at a frequency of 13.56 MHz. It is a coiled inductor antenna with an inductance of 0.72 µH and features a differential NFC port for antenna interfacing. This antenna is available as a flex PCB that measures 2.32 x 0.83 x 0.01 inches and includes a Molex FFC/FPC Connector.
Download Datasheet Product Details
RFID Tag
UHF RAIN RFID Tags from 865 to 928 MHz with Anti-Collision Technology
RFID Tag  from HID Global Corporation

The IronTag from HID Global are RAIN RFID Tags that operate in the UHF Band from 865-868 MHz (ETSI) and 865-928 MHz (Global). They are based on Impinj’s Monza X chip that has a user memory of 8192 bits, an EPC memory of 128 bits, and a TID memory of 96 bits. These UHF transponders deliver excellent performance on metal surfaces, and are built to withstand vibration, shock, chemical exposure, and fluctuating temperatures.
Download Datasheet Product Details
GPS/GNSS Antenna
IP-67 Rated Dual Band Active GNSS Antenna
GPS/GNSS Antenna  from Amphenol RF

The ST0326-41-001-A from Amphenol RF is an Active GNSS Antenna that operates up to 1.61 GHz. This dual-band antenna supports GLONASS, GNSS and GPS constellations and can handle an input power of 2 W. It has an integrated LNA that makes this antenna ideal for applications where the receiver is close to the antenna and in environments where signal strength is strong, such as open areas with a clear line-of-sight.
Download Datasheet Product Details
Software Defined Radio
Software Defined Radio (SDR) Transceiver from 30 kHz to 54 MHz
Software Defined Radio  from Flex Radio

The FLEX-8400 from FlexRadio is a Software Defined Radio (SDR) Transceiver that operates from 30 kHz to 54 MHz. It has two independent band/mode receivers and supports full-duplex cross-band operation. This transceiver has a Reciprocal Mixing Dynamic Range (RMDR) of 110 dB and a direct sampling rate of 122.88 Msps.
Download Datasheet Product Details
RF Monitoring Receiver
Multi-Channel Receiver for COMINT Applications from 2 MHz to 6 GHz
RF Monitoring Receiver  from Novator Solutions

The HUGIN 4000 from Novator Solutions is a Multichannel Receiver optimized for strategic COMINT applications that operates from 2 MHz to 6 GHz. It has 2 to 12 RF input channels, with an instantaneous bandwidth of 80 MHz and an aggregated bandwidth between 160 MHz and 960 MHz. This receiver contains up to 6144 DDCs and each of these DDCs is individually configurable during run-time.
Download Datasheet Product Details
GNSS Module
Multi-Constellation Smart Antenna + GNSS Receiver with Centimeter-Level Accuracy
GNSS Module  from Septentrio

The AntaRx-S3 from Septentrio is a Multi-Constellation Smart Antenna + GNSS Receiver. It has been designed to provide robust and reliable positioning and heading in the most challenging environments. This receiver offers centimeter-level real-time kinematic (RTK) accuracy and utilizes Septentrio’s LOCK+ technology to maintain tracking during heavy vibrations along with IONO+ to ensure position accuracy even under periods of elevated ionospheric activity.
Download Datasheet Product Details
Front End Module
Wi-Fi 6E (802.11ax) Front-End Module for Access Point Applications
Front End Module  from Qorvo

The QPF4750 from Qorvo is a Wi-Fi 6E (802.11ax) Front-End Module (FEM) that operates from 5 to 7 GHz. It integrates a power amplifier (PA), a single pole two-throw (SP2T) switch, and a bypassable low noise amplifier (LNA) into a single device. This FEM implements very wideband amplifier technology to create an easier to use and extremely compact solution for Wi-Fi applications that operate on any channel within U-NII1-8’s 2 GHz of bandwidth.
Download Datasheet Product Details
Fixed Attenuator
1-6 dB Fixed Attenuators with QMA Connectors from DC to 6 GHz
Fixed Attenuator  from Pasternack Enterprises Inc

The PE7520-X Series from Pasternack are Fixed Attenuators that operate from DC to 6 GHz. They are available in 1,2,3 and 6 dB attenuation options and have an in-line, resistive PI attenuator pad design. These attenuators can handle an input power of up to 2 W and have a VSWR of 1.30:1. They are ideal for reducing the power levels of a signal by a fixed amount with little or no reflections in amplifiers, receivers and detectors.
Download Datasheet Product Details
RF Amplifier
GaAs HBT Low Noise Amplifier from 2 to 27 GHz
RF Amplifier  from MACOM

The MAAL-011159 from MACOM is a Low Noise Amplifier that operates from 2 to 27 GHz. It delivers 24 dB of gain with a noise figure of 4.5 dB and has a saturated output power of 24 dBm. It has a gain flatness of ±2 dB and a return loss of 15 dB (input) & 14 dB (output). This amplifier is fabricated using a GaAs HBT process and features full passivation for enhanced reliability. It requires a DC supply of 6 V and consumes 215 mA of current.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide users with the latest news, information on new product releases, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]