| New RF and Microwave Products this Week . |
|
|
| Vector Network Analyzer from 10 MHz to 26.5 GHz | |
Vector Network Analyzer
from Keysight Technologies
|
| The NA5202A from Keysight is a Vector Network Analyzer that operates from 10 MHz to 26.5 GHz. It can deliver precise linear and nonlinear measurements with advanced error correction and simplifies frequency-translating component testing. This VNA leverages preselection filters built into the integrated low-noise receivers to improve dynamic range and has a highly configurable test set architecture. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 W Power Amplifier from 860 to 930 MHz | |
RF Amplifier
from CML Microcircuits
|
| The CMX90A006 from CML Micro is a Power Amplifier that operates from 860 to 930 MHz. It delivers a saturated output power of 33.5 dBm (2W) and a small signal gain of 33 dB with a power-added efficiency of 52%. This 2-stage linear power amplifier has a return loss of -20 dB (input) and -10 dB (output). It is based on InGaP HBT process technology and provides exceptional reliability and balance between efficiency, gain and linearity. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1 W Single-Junction Cryogenic Circulator from 10 to 18 GHz | |
RF & Microwave Circulator
from Low Noise Factory
|
| The LNF-CIC10_18A from Low Noise Factory is a Cryogenic Circulator that operates from 10 to 18 GHz. It provides an insertion loss of 0.3 dB and an isolation of 18 dB. This single-junction circulator can handle an input power of up to 1 W (~30 dBm) and operates at a temperature range from 0.01 K to 100 K. The LNF-CIC10_18A has been designed to meet the strict requirements of ultra-low temperature physics research and has a gold-plated OFHC copper body to which ensures minimum loss. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-band Cellular IoT/Satellite Modules from 450 MHz to 2.46 GHz | |
Cellular Module
from u-blox AG
|
| The UBX-R52/S52 Series from u-blox are Multi-band LTE-M/NB-IoT/Satellite Modules that operate in 3GPP cellular bands from 450 MHz to 2.46 GHz and 1.5 to 1.7 GHz (L-band) for satellite connectivity. They support 3GPP Release 13 Cat NB1, Release 14 Cat M1, and Release 14 Cat NB2 protocols along with IDP satellite protocol for the Orbcomm GEO satellite constellation. |
| |
Download Datasheet
Product Details | |
|
|
|
| D-Band Low Noise Amplifier from 110 to 170 GHz | |
RF Amplifier
from AT Microwave
|
| The AT-LNA-110170-3306T from AT Microwave is a Low Noise Amplifier that operates from 110 to 170 GHz. It provides a gain of 33 dB with a noise figure of less than 8 dB and has a saturated output power of +0 dBm. This LNA is fabricated using MMIC technology, which ensures reliable and repeatable unit-to-unit results. It requires a DC supply of +5 V and consumes 70 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| True-RMS RF Power Sensor from 9 kHz to 54 GHz | |
RF Power Meter & Sensor
from LadyBug Technologies
|
| The LB5954L from LadyBug Technologies is a True-RMS Power Sensor that operates from 9 kHz to 54 GHz. This general-purpose True-RMS average power meter can be used to perform scalar measurements. It can measure an average continuous power from -60 dBm to +26 dBm (~400 mW) and peak input pulsed power of up to 2 W. |
| |
Download Datasheet
Product Details | |
|
|
| Featured Interview | | Interview with Tim Avicola from Elite RF | | everything RF recently interviewed Tim Avicola, the president & CEO of Elite RF. Tim is a seasoned RF power amplifier design engineer with over 30 years of experience in designing and manufacturing RF power amplifiers. His deep hands-on expertise and market insight are key to designing cutting-edge robust RF amplifiers and staying ahead of the competition by anticipating client needs and aligning technology deployment with business strategy. Click here to read more. | | | |
|
|
| 1.2 kW, 4-Way Power Splitter/Combiner from 2.4 to 2.5 GHz | |
Power Divider
from Mini Circuits
|
| The COM-2G42G51K0+ from Mini-Circuits is a 4-Way Power Divider/Combiner that operates from 2.4 to 2.5 GHz. It can handle an input power of up to 1.2 kW (as a splitter and combiner), has an insertion loss of less than 0.3 dB and a VSWR of 1.22:1. This non-isolating power divider/combiner has a phase unbalance of ±1° and an amplitude imbalance of ±0.15 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 W Solid-State Power Amplifier from 18 to 26.5 GHz | |
RF Amplifier
from Elite RF
|
| The AB018026G4747AC from Elite RF is a Solid-State Power Amplifier (SSPA) that operates from 18 to 26.5 GHz. It delivers a CW output power of more than 50 W with more than 47 dB of gain and flatness of ±4dB. This amplifier is based on a Class AB solid-state design with spurious levels of -60 dBc and harmonics of -20 dBc. This amplifier includes built-in circuits for protection against over-heat, over-voltage, and over-VSWR conditions. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 W GaN Power Amplifier MMIC from 2.6 to 3.8 GHz | |
RF Amplifier
from WAVEPIA Co,. Ltd.
|
| The WPGM0204040M from WAVEPIA is a GaN Power Amplifier MMIC that operates from 2.6 to 3.8 GHz. It delivers a saturated output power of 47 dBm (~50 W) with a small signal gain of 25.1 dB and has a power-added efficiency (PAE) of 53.9%. This S-band power amplifier requires a DC supply from 28 to 32 V and consumes less than 1.04 A of drain current. |
| |
Download Datasheet
Product Details | |
|
|
|
| W-band Solid State Power Amplifier from 92 to 114 GHz | |
RF Amplifier
from Filtronic
|
| The Cerus 32 from Filtronic is a Solid State Power Amplifier (SSPA) that operates from 92 to 114 GHz (W-Band). It delivers a saturated output power of more than +43 dBm and a gain of more than 20 dB. This SSPA has a 32-way configuration and incorporates Filtronic’s MMIC technology to deliver high-output power and linearity. It has a bandwidth of 5 GHz and supports 256 QAM modulation. |
| |
Product Details | |
|
|
|
| 0.8 mm Female/Jack Thread-in Connector from DC to 145 GHz | |
RF Connector
from Southwest Microwave
|
| The 0.8 mm Connector from Southwest Microwave operates from DC to 145 GHz. It is an innovative and advanced thread-in connector that maintains optimal signal integrity while providing the industry’s lowest VSWR, RF leakage, and insertion loss. This connector can be mated with IEEE 287 and IEC 61169-54 standards and is both field-replaceable and reusable, thereby providing a high degree of flexibility. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 W RF Termination from DC to 40 GHz | |
Termination
from JFW Industries
|
| The 50T-741 from JFW Industries is a RF Termination that operates from DC to 40 GHz. It can handle an average input power of 10 W and has a VSWR of less than 1.35:1. This 50- Ohm termination measures 1.25 x 1.16 mm and has 2.92 mm (male/female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by PCB West 2024 | | | |
|
|
| 2W GaN Front-End MMIC from 37 to 41 GHz | |
Front End Module
from United Monolithic Semiconductors
|
| The CHC6094-QKB from United Monolithic Semiconductors is a GaN Front End MMIC that operates from 37 to 41 GHz. It is manufactured on a robust GaN-on-SiC HEMT technology and consists of a high linearity low noise amplifier (LNA), input/output switches, and a linear power amplifier (PA). In the Tx path, it delivers an output power of 33 dBm (~1.99 W) with a gain of 23 dB, while on the Rx path, it provides a gain of 23 dB with a noise figure of 4.8 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Quad Ridged Horn Antenna from 1.7 to 20 GHz from EMC/EMI Applications | |
Horn Antenna
from RF SPIN
|
| The QRH20EC from RF SPIN is a Quad Ridged Horn Antenna that operates from 1.7 to 20 GHz. This dual-linear, circular polarized antenna has an antenna factor from 28 to 42.5 dB/m and provides a port isolation of 33 dB. It can handle a CW input power of 20 W and has a VSWR of less than 2.4:1. The antenna uses patented 3D-printed lens technology and is manufactured with RF SPIN’s SPM Technology to achieve the best mechanical and radio parameters. |
| |
Download Datasheet
Product Details | |
|
|
|
| Drop-In 90° Hybrid Coupler from 902 to 928 MHz | |
90 Degree Hybrid Coupler
from Innovative Power Products
|
| The IPP-2394 from Innovative Power Products is a 90 °Hybrid Coupler that operates from 902 to 928 MHz. This 3 dB coupler provides an isolation of more than 19 dB and has an insertion loss of less than 0.20 dB. It can handle an input power of 1000 W and has a VSWR of less than 1.25:1. This coupler has an amplitude balance of ±0.30 dB and a phase balance of ±5°. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 64 Gbps Differential Dual DP3T Relay with Loopback from DC to 20 GHz | |
RF Switch
from Menlo Micro
|
| The MM5622 from Menlo Micro is a Differential Dual DP3T Relay that operates from DC to 20 GHz. It is based on Menlo’s Ideal Switch® technology and can operate at 64 Gbps with a bandwidth of 20 GHz for high-performance applications. This relay fully integrates the switch driver and charge pump, along with decoupling capacitors for significant board footprint reduction in high-volume production test solutions. |
| |
Download Datasheet
Product Details | |
|
|
|
| Matter/Zigbee/Thread/Bluetooth (LE) 5.4 SoC for Smart Home Applications | |
Wireless Chipset
from Qorvo
|
| The QPG6200L from Qorvo is a 2.4 GHz Wireless SoC that supports Matter, Zigbee, Thread, and Bluetooth Low Energy. It is compliant with the IEEE Standard 802.15.4 for Zigbee and Thread, and the Bluetooth Core Specification v5.4 for Bluetooth Low Energy. This SoC integrates a balun, filter, radio transceiver, Bluetooth Low Energy controller, integrated Arm® Cortex®-M4 microprocessor, RAM, and Flash memory. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1:2 Balanced-to-Unbalanced Transformer from 0.18 to 1.9 GHz | |
Balun
from TTM Technologies
|
| The XMB0220K1-50100G from TTM Technologies is a Balanced-to-Unbalanced Transformer that operates from 0.18 to 1.9 GHz. It can handle a CW input power of 1 W, has an impedance ratio of 1:2, and an insertion loss of less than 5 dB. This Balun has an amplitude balance of ±0.6 dB and a phase balance of ±4°. It enables single-ended signals to be applied to differential ports on analog-to-digital and digital-to-analog converters and integrated RF chipsets used in radar to Internet of Things sensors. |
| |
Download Datasheet
Product Details | |
|
|
|
| RFID Tag from 865 to 928 MHz for Healthcare Applications | |
RFID Tag
from Xerafy
|
| The MICRO Autoclave from Xerafy is an RFID Tag that operates from 902 to 928 MHz (US) and 865 to 868 MHz (EU). It is designed to withstand the rigors of sterile processing in healthcare and is compliant with EPC global Class 1 Gen 2 RF protocol. It has an Alien Higgs 9 RFID chip, an EPC memory of 96 bits, a TID memory of 48 bits, and a user memory of 688 bits. |
| |
Download Datasheet
Product Details | |
|
|
|
| Bandpass Filter from 3.3 to 3.8 GHz | |
Band Pass Filter
from Quantic PMI (Planar Monolithics)
|
| The BPF-3R55G-500M-SFF from Quantic PMI is a Bandpass Filter that operates from 3.3 to 3.8 GHz (-3 dB bandwidth). It has an insertion loss of less than 1.9 dB and a rejection of more than 40 dBc. This bandpass filter can handle an input power of up to 1 W and has a VSWR of less than 1.50:1. It is available in a module that measures 0.99 x 0.47 x 0.35 inches and has SMA female connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 13.56 MHz Embedded NFC RFID Reader with a Read Range of up to 10 cm | |
RFID Reader Module
from IdTronic
|
| The M980 from idTronic is an 8-Channel Embedded NFC RFID Reader that operates at 13.56 MHz (HF). It has been developed for integration into check-in counters, libraries, retail, or shelving systems. This RFID reader incorporates idTronic’s M900 IC, NXP’s CLRC633 NFC front-end, a cutting-edge microcontroller, and the latest HF transceiver technology, allowing users to read and write 13.56 MHz transponders at a distance of up to 10 cm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 400 MHz Hermetically-Sealed Voltage-Controlled SAW Oscillator | |
Voltage Controlled SAW Oscillator
from Microchip Technology
|
| The 101765-400-B from Microchip Technology is a Voltage-Controlled SAW Oscillator (VCSO) that operates at 400 MHz. This SAW oscillator is a high-Q Quartz device that enables the circuit to achieve very low phase noise in a rugged package. It provides Sinewave output waveforms with a phase noise of 157 dBc/Hz (at 10 kHz offset) and a frequency stability of ±70 ppm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 18 dB Directional Coupler from 5 to 55 GHz | |
Directional Coupler
from MACOM
|
| The MACP-011113 from MACOM is a Directional Coupler that operates from 5 to 55 GHz. It has a coupling factor of 18 to 25 dB, a directivity of 13 dB, and an insertion loss of 0.3 dB. This coupler has an isolation of 45 dB and can handle an input power of up to 30 dBm (~1 W) with a return loss of more than 12 dB. It is manufactured using MACOM’s proprietary HMIC process that enables market-leading lightweight passive components. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 MHz GPS Disciplined Oscillators for Navigation and Timing Applications | |
GPS/GNSS Disciplined Oscillator
from Abracon LLC
|
| The ABCM-60 Series from Abracon are GPS Disciplined Oscillators that operate at 10 MHz. These oscillators merge the stability of an OCXO with the precise timing signals from GNSS satellites to provide highly accurate and reliable timing. They include a GNSS receiver for precise time information, a lock pin indicator, and holdover operation to maintain accuracy when GNSS signals are unavailable, with outputs including a 10 MHz clock signal and a 1PPS signal. |
| |
Download Datasheet
Product Details | |
|
|
|
| Solderless PCB SMA-Jack Coaxial Connectors from DC to 27 GHz | |
RF Connector
from Wurth Elektronik
|
| The WR-SMA from Wurth Elektronik are SMA-jack, Solderless PCB connectors that operate from DC to 27 GHz. They have a withstanding voltage of either 650 V or 1000 V(RMS), insulation resistance of more than 5000 Mega ohms, and a VSWR of less than 1.30:1. These 50 Ohm connectors have an insertion loss of less than 0.26 dB and a center contact resistance of 3 mO. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4-Port Antenna from 698 to 960 MHz | |
Base Station Antenna
from CellMax Technologies
|
| The 12052x from CellMax Technologies is a 4-Port Antenna that operates from 698-960 MHz. It is designed to maximize high-band coverage, and achieve better load-balancing, high throughput, and subscriber satisfaction, which is relevant when upgrading existing sites with new frequencies. This antenna provides a gain of 16.9 dBi (698-960 MHz) and 18.4 dBi (824-960 MHz). |
| |
Download Datasheet
Product Details | |
|
