| New RF and Microwave Products this Week |
|
|
| Double-Balanced Passive Diode Mixer from 2.5 to 8 GHz | |
RF Mixer
from MACOM
|
| The MAMX-011033 from MACOM is a Double-Balanced Passive Diode Mixer with a LO/RF frequency from 2.5 to 8 GHz and an IF frequency from DC to 3.5 GHz. It has a conversion loss of 7 dB, an input IP3 of 16 dBm and requires an LO power of 15 dBm. It has an LO-to-RF isolation of 37 dB, LO-to-IF isolation of 40 dB, and RF-to-IF isolation of 18 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Smart Power Sensor from 50 to 9000 MHz | |
RF Power Meter & Sensor
from Mini Circuits
|
| The PWR-9PWHS-RC is a Smart Power Sensor that operates from 50 to 9000 MHz. It can measure modulated signals with up to a bandwidth of 30 MHz and has a sample rate of up to 80 Msps with an internal buffer that enables up to 120,000 complete measurements per second. This power sensor has an input power range of -60 to +20 dBm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ultra-Low Noise RF Signal Generator from 3 to 10/20 GHz | |
Signal Generator
from QuSinus
|
| The PureWave QSSGHG10G from QuSinus is a Signal Generator that operates from 3 to 10 GHz. This signal generator has been meticulously designed to deliver excellent signal purity and frequency stability, making it ideal for a broad range of measurement applications. It has an output power range from -10 to +10 dBm (can be extended from –70 to +18 dBm) and a phase noise of -155 dBc/Hz (at 100 kHz offset, 10 GHz frequency). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Waveguide Power Sensor from 50 to 75 GHz | |
RF Power Meter & Sensor
from LadyBug Technologies
|
| The LB5975W from LadyBug Technologies is a Waveguide Power Sensor that operates from 50 to 75 GHz. This general-purpose True-RMS average power meter can be used to perform scalar measurements. It uses a highly accurate, thermally stabilized, two-path, RMS responding, square law diode detection scheme and makes accurate measurements on any signal regardless of its modulation bandwidth. This power sensor has a dynamic range from -50 dBm to +18 dBm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Miniature Chip Inductors from 22 to 51 nH | |
RF Inductor
from Coilcraft
|
| The 0201HL Series from Coilcraft are Ceramic Chip Inductors with inductance values from 22 to 51 nH. These inductors have twice the Q factor when compared to inductors of the same size based on thin-film technology. They have a Self-Resonance Frequency (SRF) from 3.25 to 4.35 GHz and a DC resistance of less than 1.85 Ohms. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Teledyne SP Devices | | | |
|
|
| 2.4 mm Male to Male In-Series Adapter from DC to 50 GHz | |
In Series RF Adapter
from Marki Microwave
|
| The ADPMVMV from Marki Microwave is a 2.4 mm Male to Male In-series Adapter that operates from DC to 50 GHz. It has an insertion loss of 0.19 dB, a return loss of 27 dB, and consumes less than 7.5 A of current. This RoHS-compliant adapter measures (Dia) 8 x (L) 17.1 mm and has a stainless-steel body with beryllium copper contacts. It has an EAR99 export classification. |
| |
Download Datasheet
Product Details | |
|
|
|
| 12 dB Power-Film Flange Attenuator from DC to 4 GHz | |
Fixed Attenuator
from Spectrum Control
|
| The PPA20-12 from Spectrum Control is a Power-Film Flange Attenuator that operates from DC to 4 GHz. It provides 12 dB of attenuation with an accuracy of ±0.5 to ±3 dB. This 50-Ohm attenuator can handle an input power of up to 20 W and has a VSWR of less than 1.50:1. It has a Beryllium Oxide (BeO) substrate, an Alumina Ceramic cover, a proprietary thin-film resistor material, and a Gold-plated Beryllium Copper tab. |
| |
Download Datasheet
Product Details | |
|
|
|
| SP8T Absorptive Switch from 2 to 18 GHz | |
RF Switch
from Quantic PMI (Planar Monolithics)
|
| The P8T-2G18G-60-T-SFF-NSI from Planar Monolithics Industries is a Absorptive SP8T Switch that operates from 2 to 18 GHz. This switch has an insertion loss of 4.5 dB, isolation of 60 dB and can handle up to 20 dBm of power. It has a VSWR of 2:1 and a switching speed of 100 nsec. The switch module requires a +/-5V DC Supply with maximum current consumption 300 mA. |
| |
Download Datasheet
Product Details | |
|
|
|
| Cavity-Backed Sinuous Antenna from 18 to 50 GHz | |
Antenna
from Nuvotronics, Inc.
|
| The PSA1850 from Cubic Nuvotronics is a Cavity-Backed Sinuous Antenna that operates from 18 to 50 GHz. This dual linear/circularly polarized antenna provides a peak gain of 4.5 dBi and has an axial ratio of 2 dB. It has a half-power beamwidth of 65°. This 4-arm antenna measures 30.007 x 10.414 mm and has SMPM connectors. It is ideal for wideband direction finding, radar warning receivers, SIGINT/ELINT, and interferometry applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 750 W Solid-State Power Amplifier from 80 MHz to 6 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2055DB-750-200LC from Exodus Advanced Communication is a Solid-State Power Amplifier that operates from 80 MHz to 1 GHz (Band A) and 1 to 6 GHz (Band B). It delivers a CW/Pulsed output power of 750 W (Band A) with a power gain of more than 58 dB. In Band B it provides 200 W of saturated power (125 W P1dB) with a gain of 53 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Software-Defined Radio Transceiver from 5 MHz to 18 GHz | |
Software Defined Radio
from Pacific Defense
|
| The SX-430 from Pacific Defense is a Software-Defined Radio (SDR) Transceiver that operates from 5 MHz to 18 GHz. This transceiver’s design is aligned with SOSA and CMOSS technical standards and is equipped with Xilinx Zynq UltraScale+ MPSoC (C2 and DSP), memories (12 GB DDR4, EPROM, flash), two transmitters and receivers. It also consists of data converters (16-bit ADC/DAC), FPGAs, switches, power management, and control interfaces. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Teledyne SP Devices | | |
|
|
| Surface Mount Gain Equalizer from DC to 45 GHz | |
Gain Equalizer
from Knowles
|
| The AEQ11391 from Knowles is a Gain Equalizer that operates from DC to 45 GHz. It has a positive gain slope of 2.5 dB and an insertion loss of less than 4 dB. This equalizer has a monolithic construction with precision thin-film conductor and resistor films with proprietary high dielectric constant ceramics for superior RF performance and repeatability. |
| |
Download Datasheet
Product Details | |
|
|
|
| 7.4475 GHz Phase-Locked Dielectric Resonator Oscillator | |
PLDRO
from Qualwave
|
| The QPDO-I-100-7.4475 from Qualwave is a Phase-Locked Dielectric Resonator Oscillator (PLDRO) that operates at 7.4475 GHz. It delivers an output power of more than 14 dBm and has a frequency stability of ±0.3 ppm. This PLDRO has spurious levels of up to -70 dBc, harmonics of less than -20 dBc, and a phase noise of -115 dBc/Hz (at 100 kHz offset). It requires a DC supply of 12 V and consumes less than 650 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| USB-Powered Real-Time Peak Power Sensor from 50 MHz to 40 GHz | |
RF Power Meter & Sensor
from Boonton
|
| The RTP5006 from Boonton is a Real-Time Peak Power Sensor that operates from 50 MHz to 40 GHz. It has a dynamic range from -60 dBm to +20 dBm and a pulse width of more than 10 ns. This power sensor offers excellent performance with wide video bandwidth, fast rise times, fine time resolution, narrow minimum pulse widths, and good measurement reading rates. |
| |
Download Datasheet
Product Details | |
|
|
|
| Double-Ridge Waveguide Pressure Windows from 0.84 to 40 GHz | |
Waveguide Pressure Window
from Scientific Microwave Corporation
|
| The SMC-060 Series from Scientific Microwave Corporation are Double-Ridge Waveguide Pressure Windows that operate from 0.84 to 40 GHz. They can handle a pressure of up to 40 Psi with quartz crystal sealing and have a VSWR of less than 1.40:1. These pressure windows are available with different waveguide interfaces from WRD840 to WRD180, covering frequencies up to 40 GHz. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Way Wilkinson Power Dividers from 1 to 67 GHz | |
Power Divider
from HYPERLABS
|
| The HL967x Series from Hyperlabs are 2-way Wilkinson Power Dividers that operate from 1 to 40, 50, or 67 GHz. These power dividers have an insertion loss of 4 dB, an isolation of 15 dB, and have a group delay of 260 ps at all ports. They can handle a maximum input power of +30 dBm (~1 W) with a return loss of more than 10 dB. These Wilkinson power dividers have an amplitude match of ± 0.1 dB and a phase match of ± 2°. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 dB Variable Step Attenuator from DC to 2 GHz | |
RF Variable Attenuator
from MECA
|
| The 685-110-1 from MECA is a Variable Step Attenuator that operates from DC to 2 GHz. It has an attenuation range of 0 to 50 dB in 1 dB steps (manually controlled by a knob) and an insertion loss of less than 1 dB. This attenuator can handle an average power of 2 W, and a peak input power of 1 kW with a VSWR of less than 1.5:1. It is available in module and has N-Type female connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 64T64R MIMO 5G Backhaul Radio from 3.55 to 3.7 GHz | |
Microwave Backhaul Radio Links
from AGTGSS
|
| The 64TR mMIMO from AmpliTech Group True G Speed Services (AGTGSS) is a Backhaul Radio that operates from 3.55 to 3.7 GHz. It has a bandwidth of up to 100 MHz and supports QPSK and 16/64/256 QAM modulation schemes. This radio supports TDD duplex mode and 64T64R MIMO. It is a “plug-n-play” solution for P5G and local carriers and offers benefits such as rapid deployment, flexibility, cost-effectiveness, localized high-speed connectivity, enhanced security, and interoperability. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.7 Gbps Millimeter Wave Backhaul Radio from 57 to 71 GHz | |
Microwave Backhaul Radio Links
from Miliwave
|
| The airPATH 60 from Miliwave is a mmWave Microwave Backhaul Solution operating between 57 and 71 GHz. This mmWave wireless bridge is designed to create long-range wireless broadband connections, delivering up to 2.7 Gbps of full-duplex throughput over a range of up to 15 km. It features 6 operating channels with configurable bandwidths of 2160 or 1080 MHz and provides an EIRP of 61 dBm. |
| |
Download Datasheet
Product Details | |
|
|
|
| L1 and L5 GNSS Front End Module with LNA and Post-Filter | |
Front End Module
from Skyworks Solutions
|
| The SKY55951-11 from Skyworks is a GNSS Front End Module that supports L1 and L5 GNSS frequencies. It has dedicated L1 and L5 receive paths with an integrated L1 LNA, B13 notch post-filter, and an L5 LNA and post-filter. The LNAs deliver a small signal gain of up to 17.5 dBm and have a noise figure of less than 1.5 dB. It has a return loss of less than 18 dB (output) and 8 dB (input). |
| |
Download Datasheet
Product Details | |
|
|
|
| Single-Channel Wideband Capture and Record System from 20 Hz to 26.5 GHz | |
RF Spectrum Recording and Playback System
from Spectra Lab
|
| The SD-BTO-3823 from Testforce is a Single-Channel RF Spectrum Capture and Record System that operates from 20 Hz to 26.5 GHz. This system is designed to record a wide block of RF spectrum in congested spectral environments using a single channel. It consists of a quad-core embedded CPU, disk storage subsystem, and National Instruments’ modular RF instruments in PXIe form-factor. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-Constellation GNSS Antenna for Navigation and Timing Applications | |
GPS/GNSS Antenna
from Calian
|
| The VSP600P from Calian is a multi-constellation GNSS antenna designed for high-accuracy positioning with robust and reliable performance. This antenna leverages Tallysman’s unique VeroStar™ technology, providing high gain over the full GNSS spectrum, enabling accurate tracking of GNSS and L-Band correction signals from low elevation angles. It delivers a gain of 4 dB with over 70% efficiency and an axial ratio of less than 1 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 20 dB Directional Coupler from 1.7 to 20 GHz | |
Directional Coupler
from KRYTAR
|
| The 101720020 from KRYTAR is a Directional Coupler that operates from 1.7 to 20 GHz. It has a coupling of 20 dB and a directivity of more than 10 dB. This coupler can handle an input power of 20 W and a peak power of 3 kW with a VSWR of less than 1.45:1. It has an insertion loss of less than 1 dB and a frequency selectivity of ± 1.8 dB. This directional coupler is uniquely designed for system applications requiring external leveling, precise monitoring, signal mixing, swept transmission, and reception. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 MHz Ultra-Stable OCXO for GNSS and PNT Applications | |
OCXO
from Rakon
|
| The RK409AVNS from Rakon is an OCXO that operates at 10 /10.23 MHz. It has a sinewave output with an output level of 4 to 8 dBm. This OCXO has an Allan Variance (AV) short-term stability of 2.5E-13 at 1 s and a frequency stability of ±0.2 ppb over an operating temperature of -10 to 60 °C. It has aging of ±150 ppb max over 10 years, harmonics of less than -40 dBc, and a phase noise of less than -158 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| Digital H-Field Probe from 1 Hz to 400 kHz | |
Near Field Probe
from Narda Safety Test Solutions
|
| The BFD-400-1 from Narda Safety Test Solutions is a Digital H-Field Probe that is designed for isotropic measurement of magnetic flux density in the frequency range from 1 Hz to 400 kHz. It integrates a 100 cm2 sensor for isotropic (direction-independent) measurement and has a dynamic range of 70 dB. This probe can perform simple measurements for standard-compliant evaluation as well as detailed measurements for detailed signal and field strength composition analysis. |
| |
Download Datasheet
Product Details | |
|
