| New RF and Microwave Products this Week |
|
|
|
|
|
|
|
| Fractional-N PLL Frequency Synthesizer from 1 to 4 GHz | |
Frequency Synthesizer
from Luff Research, an Ironwave Technologies Company
|
| The SLSM5-14 from Luff Research is a Single Phase-Locked Loop (PLL) Frequency Synthesizer that generates output signals from 1 to 4 GHz. This synthesizer has a PLL IC, amplifiers, local oscillators with TCXO, an integrator, and a power divider. It delivers an output power of +15 dBm, has a phase noise of less than -100 dBc/Hz (at 10 kHz offset), and has a frequency step size of 1 kHz. |
| |
Download Datasheet
Product Details | |
|
|
|
| WR75 Dual Broadwall Coupler from 10.7 to 12.75 GHz | |
Waveguide Coupler
from Scientific Microwave Corporation
|
| The WR75 from Scientific Microwave Corporation is a Dual Broadwall Coupler that operates from 10.7 to 12.75 GHz. This 25 dB coupler has a directivity of more than 16 dB, and an insertion loss of 0.2 dB. It can handle a CW input power of 100 W and has a VSWR of 1.20:1. This dual broadwall coupler facilitates essential functions such as power monitoring, enabling measurement of forward and reflected power in RF and microwave systems. |
| |
Download Datasheet
Product Details | |
|
|
|
| Automotive Radar Simulation Software | |
Software
from Remcom
|
| WaveFarer® is a high fidelity radar simulator that accounts for multipath and scattering from structures and vehicles in the immediate environment of a radar system as well as key atmospheric and scattering effects for frequencies up to and beyond 100 GHz. Applications include simulation of automotive drive scenarios, indoor sensors, and far field radar cross section (RCS). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Automotive Radar Target Simulator from 76 to 81 GHz | |
RF Test Set
from Rohde & Schwarz
|
| The R&S®RadEsT from Rohde & Schwarz is a high-performance Automotive Radar Target Simulator, operating within the 76 to 81 GHz range, designed to enable precise and dynamic radar testing. It captures, modifies, and returns signals from radar sensors, effectively simulating radar targets across distances from 2.5 to 250 meters. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by SV Microwave | | Secure Locking R/A Cable Connectors | | SV Microwave’s secure locking QuarterBack® R/A cable connectors feature a quarter turn bayonet style coupling nut for standard female SMP/SMPM interfaces. Designed for high vibration and frequent mating cycles, this product line now includes a right angle orientation, perfect for tight routing. Click here to learn more. | | | |
|
|
| Rugged Low-Noise Disciplined Rubidium Oscillator | |
GPS/GNSS Disciplined Oscillator
from Safran Electronics & Defense
|
| The SRO-5680 from Safran is a low noise Disciplined Rubidium Oscillator that integrates complex synchronization functionality in a low-cost, super-small package that is EMI-shielded and rugged. It utilizes Safran’s SmarTiming+® technology to provide a host of integrated GPS/GNSS disciplining and timing features. The Synchronized Rubidium Oscillator intelligently synchronizes, disciplines, and controls any primary 1PPS reference signal, such as GPS/GNSS, Cesium, Hydrogen Maser, and T1/E1, at cutting-edge 1ns resolution. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz Wi-Fi 7 (802.11be) Front End Module | |
Front End Module
from Qorvo
|
| The QPF4202 from Qorvo is a Wi-Fi 7 (802.11be) Front End Module that operates from 2412 to 2484 MHz. It consists of a 2.4 GHz power amplifier (PA), single pole two throw switch (SP2T), and bypassable low noise amplifier (LNA) into a single device. This FEM also has an RF output coupler, a broad-range constant slope voltage logarithmic power detector for precise power control, and digital pre-distortion (DPD) for enhanced linear output power and throughput. |
| |
Download Datasheet
Product Details | |
|
|
|
| Secure Wi-Fi 6 and Bluetooth 5.4 Multi-Radio Modules | |
RF Module
from u-blox AG
|
| The MAYA-W4 Series from u-blox are Wi-Fi 6 and Bluetooth 5.4 Multi-Radio Modules that are designed and tested to meet the high reliability and quality requirements of industrial and commercial applications. They are based on NXP’s IW610x chipsets. These cost-efficient modules provide 1x1 SISO Wi-Fi 6 operation with multi-user-MIMO technology over a channel bandwidth of 20 MHz for improved network availability in dense environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| Corner Chip Antenna from 2400 to 2485 MHz | |
Antenna
from KYOCERA AVX
|
| The A9005868 from KYOCERA AVX is a Chip Antenna that operates from 2400 to 2485 MHz, supporting automotive, Wi-Fi, Bluetooth, BLE, Zigbee, WLAN, and ISM bands. It delivers a peak gain of 4 dBi and has an average efficiency of 62%. This linearly polarized antenna has an omnidirectional radiation pattern and can handle 0.5 W of power. |
| |
Download Datasheet
Product Details | |
|
|
|
| 30 dB Dual-Directional Coupler from 60 to 90 GHz | |
Waveguide Coupler
from ACST GmbH
|
| The 532S from ACST GmbH is a Dual-Directional Coupler that operates from 60 to 90 GHz. This 30 dB coupler provides an isolation of more than 25 dB and has an insertion loss of less than 2.7 dB. It is based on ACST’s high-precision manufacturing technology and exhibits high directivity, low loss, and flat coupling response over the operating frequency band. |
| |
Download Datasheet
Product Details | |
|
|
|
| Negative Slope Gain Equalizer from 0.5 to 18 GHz | |
Gain Equalizer
from Inmet by Spectrum Control
|
| The EQ2301 from Inmet by Spectrum Control is a Negative Slope Gain Equalizer that operates from 0.5 to 18 GHz. It provides gain equalization slopes ranging from 3 to 35 dB and has a maximum insertion loss of 6 dB. This equalizer can handle an input power of up to 1 W and has a VSWR (input/output) of less than 1.80:1. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by SV Microwave | | |
|
|
| 200 V Inner DC Block from 10 MHz to 18 GHz | |
DC Block
from JFW Industries
|
| The 50DB-081 from JFW Industries is an Inner DC Block that operates from 10 MHz to 18 GHz. It has a DC breakdown voltage of 200 V and an insertion loss of less than 0.5 dB. This 50-Ohm DC block can handle an average input power of 2 W and has a VSWR of less than 1.35:1. It has a length of 0.94 inches and has SMA (male/female) connector. |
| |
Download Datasheet
Product Details | |
|
|
|
| Thermal Vacuum Stable Cable Assemblies from DC to 40 GHz | |
RF Cable Assembly
from Maury Microwave
|
| The StabilityTVAC Series from Maury Microwave are Cable Assemblies that operate from DC to 40 GHz. These cable assemblies are thermally conditioned through aging and stabilization to relieve mechanical stress and ensure reliable performance over temperature. They utilize vented connectors that allow air to escape much faster, thereby empowering cable assemblies to stabilize with minimal delays and tests to be performed using rapid pressurization / depressurization cycles. |
| |
Download Datasheet
Product Details | |
|
|
|
| In-Line Waveguide-to-Coaxial Adapter from 17.7 to 22 GHz | |
Waveguide to Coax Adapter
from AmpliTech, Inc.
|
| The WR0042E from AmpliTech is a Waveguide-to-Coaxial Adapter that operates from 17.7 to 22 GHz. It has an insertion loss of less than 0.4 dB and a VSWR of 1.20:1. This in-line adapter offers excellent performance and very low insertion loss in a lightweight and compact form-factor, making it suitable for use in test equipment and receivers. |
| |
Download Datasheet
Product Details | |
|
|
|
| Bench-Top RF Shield Box from 20 MHz to 12 GHz | |
RF Shielded Test Enclosure
from RF Electronics
|
| The HDRF-1467-S from RF Electronics is an RF Shield Box for the frequency range from 20 MHz to 12 GHz. It has a thick RF-absorbing foam that deadens standing waves and reflections to provide more than 100 dB of isolation. The test box has shielded power filters for powering devices placed inside the box while blocking all wireless signals. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Phase Noise TCXO from 8 to 60 MHz for Microwave Applications | |
TCXO
from Dynamic Engineers
|
| The TCXO5300AX from Dynamic Engineers is a Temperature Controlled Crystal Oscillator (TCXO) that operates from 8 to 60 MHz. It provides clipped Sinewave or CMOS/TTL output waveforms with an SSB phase noise of -138 dBc/Hz (1 kHz offset) and has a frequency stability of ±0.28 ppm (vs. temperature). This TCXO is suitable for applications where excellent frequency stability and timing are required. |
| |
Download Datasheet
Product Details | |
|
|
|
| High-Stability Miniature OCXO from 10 to 20 MHz | |
OCXO
from IQD Frequency Products
|
| The IQOV-116-1 from IQD Frequency Products is a high-stability OCXO available in standard frequencies of 10, 19.2, and 20 MHz. It provides an HCMOS output with a phase noise of -130 dBc/Hz at a 100 kHz offset and a duty cycle of 45/55%. This oscillator delivers a frequency stability of ±0.05 ppm and has a g-sensitivity of less than 1 ppb/g with a rise and fall time of 6 ns. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| SP10T Switch for Military Applications | |
RF Switch
from Mobix Labs
|
| The MBX3110 from Mobix Labs is an SP10T switch designed to increase performance and reliability in land mobile radio (LMR) systems crucial to first responders, law enforcement, and military personnel. This high-reliability solid-state switch surpasses traditional electromechanical counterparts, providing improved durability, faster response, and a longer lifespan for advanced RF applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 250 W RF Termination from DC to 3 GHz | |
Termination
from Broadwave Technologies
|
| The Model 552-189-250 from Broadwave Technologies is a RF Termination that operates from DC to 3 GHz. It can handle an average input power of up to 250 W and has a VSWR of less than 1.35:1. This 50-Ohm termination is available in a module and has N-type (female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3 dB Wirebond Quadrature Hybrid Coupler from 6 to 18 GHz | |
90 Degree Hybrid Coupler
from Knowles
|
| The FHC10293 from Knowles is a Quadrature Hybrid Coupler that operates from 6 to 18 GHz. This 3 dB coupler provides an isolation of 15 dB and has an insertion loss of less than 1 dB. It can handle a CW input power of 50 W and has a return loss of 15 dB. This hybrid coupler has an amplitude balance of ±1 dB and a phase balance of ±3°. |
| |
Download Datasheet
Product Details | |
|
|
|
| Active GNSS Antenna from 1164 to 1606 MHz | |
Antenna
from Quectel
|
| The YEGN103W8A from Quectel is an Active GNSS Antenna that operates from 1164 to 1300 MHz and 1525 to 1606 MHz. It is optimized for GNSS L1/L5 bands and integrates an LNA with a gain of 40 dB. This terminal/magnetic mount antenna features both magnetic and suction cup supports, with a bracket length of 75 mm. It is enclosed in an IP67-rated package that measures Φ146.4 x 71.43 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| UHF Flexible On-Metal RFID Tags | |
RFID Tag
from GAO RFID
|
| The 11628X from GAO RFID is an On-Metal RFID Tag that operates in the UHF frequency range from 860 to 960 MHz. It uses an Impinj Monza 730 or NXP UCODE 8 IC and is specifically designed for effortless application onto metallic assets. This flexible tag complies with EPC Class-1 Gen2 and ISO 18000-6C standards. It is compatible with RFID printers for printing and encoding and has a read range of 5 to 15 meters. |
| |
Download Datasheet
Product Details | |
|
|
|
| Portable Spectrum Analyzer Extenders from 50 to 170 GHz | |
Spectrum Analyzer Extender
from Virginia Diodes, Inc.
|
| The PSAX Modules from Virginia Diodes are Portable Spectrum Analyzer Extenders that operate from 50 to 170 GHz (higher frequency options available). These spectrum analyzer extenders are designed to connect directly to the RF ports on Keysight’s FieldFox analyzers and extend their performance over the operating frequency range. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 W Solid-State Linear Amplifier from 30 to 88 MHz for Tactical Applications | |
RF Amplifier
from Datron
|
| The AM-1077 from Datron is a Solid-State Linear Amplifier that operates from 30 to 88 MHz. It delivers an average output power of 50 W. This amplifier can be used with exciters to form high-power VHF systems, and with any VHF transmitter having an appropriate output power, compatible DC power, and control interfaces. It has a linearity rating that ensures high performance for all VHF voice and high-speed data applications. |
| |
Download Datasheet
Product Details | |
|
