| Featured Products this Week |
|
|
| Up-Down Converter and Beamformer for 5G mmWave Applications | |
RF Up-down Converter
from Analog Devices
|
| The ADMV1239 from Analog Devices is an Up-Down Converter and Beamformer that operates from 37 to 43.5 GHz. It integrates a 16 (2x8) channel beamformer paired with a 2 transmit (TX) and 2 receive (RX) channel upconverter/downconverter (UDC). This RFIC has on-chip transmit-receive switches that connect the upconverter RF output and downconverter RF input for each polarization into eight independent channels via the 1x8 power splitters/combiners. |
| |
Download Datasheet
Product Details | |
|
|
|
| Broadband RF Balun from 500 kHz to 100 GHz | |
Balun
from HYPERLABS
|
| The HL9409 from Hyperlabs is an RF Balun that operates from 500 kHz to 100 GHz. It can handle an input power of up to 1 W (30 dBm) and has an insertion loss of 6.5 dB. This 50-ohm balun has an amplitude balance of ±0.5 dB and a phase balance of ±15° at 80 GHz. It employs attenuators to improve isolation when the device is used as a signal combiner using differential signals with unmatched source impedance. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 200 W Solid-State Power Amplifier from 6 to 18 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2065A-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 6 to 18 GHz. It delivers a saturated output power of more than 200 W with a gain of over 53 dB. The amplifier has a class A/AB linear design and includes built-in protection circuits with extensive monitoring for forward/reflected power, VSWR, voltage, current & temperature sensing for superb reliability and ruggedness. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ceramic Chip Inductors from 1.8 to 390 nH | |
RF Inductor
from Coilcraft
|
| The 0603HP Series from Coilcraft are Ceramic Chip Inductors with inductance values from 1.8 to 390 nH. They have a high Q-factor of up to 157 (at 1.7 GHz) and self-resonant frequency (SRF) values ranging from 0.88 to 16 GHz. These inductors have DC resistances of less than 4 Ohms and a current rating of up to 2100 mA. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by HUBER+SUHNER | | |
|
|
| 20 dB Directional Coupler from 380 to 960 MHz | |
Directional Coupler
from MECA
|
| The 715-20-0.670 from MECA is a directional coupler that operates from 380 to 960 MHz. It has a coupling value of 20 dB and can handle up to 250 watts of power. The coupler has an insertion loss of less than 0.1 dB and directivity of more than 25 dB. It is available in a module with N-type female connectors and operates over a temperature range of -55°C to +85°C. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Way Wilkinson Power Divider MMIC from 0.4 to 4 GHz | |
Power Divider
from Marki Microwave
|
| The MPD2-00001PSM from Marki Microwave is a 2-Way Wilkinson Power Divider MMIC that operates from 0.4 to 4 GHz. It uses a mix of lumped elements and distributed circuits to reduce the footprint while maintaining isolation at low frequencies significantly. This Wilkinson power divider/spliiter provides an isolation of more than 16 dB and has an insertion loss of 0.9 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 200 W GaN Microwave Generator from 2400 to 2500 MHz | |
Microwave Generator
from RFHIC
|
| The RIM25200-20G from RFHIC is a GaN Microwave Generator that operates from 2400 to 2500 MHz. It delivers a typical CW output power of 200 W with an efficiency of up to 60%. The amplifier has a pulse duty cycle from 1 to 99% and a frequency resolution of 100 kHz. It requires a supply voltage of 50 V and consumes more than 6.88 A of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 30 GHz, High-Temperature Flexible Microwave Cable | |
RF Cable
from HUBER+SUHNER
|
| The SL290 from HUBER+SUHNER is a Flexible Microwave Cable that operates up to 30 GHz. It has an outer diameter of 5 mm, a minimum bend radius of 27.5 mm and provides a screening effectiveness of better than 90 dB (up to 18 GHz). This 50-ohm cable has a velocity of propagation of 84%, a signal delay of 4 ns/m and a phase vs temperature variation of 500 ppm (from -55°C to +125°C). |
| |
Download Datasheet
Product Details | |
|
|
|
| Phase Stable Cable Assembly from DC to 26.5 GHz | |
RF Cable Assembly
from Junkosha
|
| The MWX322 from Junkosha is a Microwave/mmWave Coaxial Cable Assembly that operates from DC to 26.5 GHz. This assembly showcases excellent phase stability against temperature fluctuations and is suitable for applications with a wide temperature range. It can operate over a temperature range of 65 to +125°C and has a reinforced connector neck to provide better durability for wiring between devices. |
| |
Download Datasheet
Product Details | |
|
|
|
| 180 W GaN HEMT Transistor from 1.2 to 1.4 GHz | |
RF Transistor
from United Monolithic Semiconductors
|
| The CHZ180AaSEB from United Monolithic Semiconductors is an L-Band GaN HEMT Transistor that operates from 1.2 to 1.4 GHz. It provides 180 W of saturated output power with a gain of 20 dB and has a PAE of 52%. This pulsed device has a pulse width of 3 ms and a duty cycle of 20%. The CHZ180AaSEB is manufactured using a GaN HEMT process with 0.5μm gate length and is based on Quasi-MMIC technology. |
| |
Download Datasheet
Product Details | |
|
|
|
| Calibration-Grade Metrology Quick-Test Adapters from DC to 50 GHz | |
In Series RF Adapter
from Maury Microwave
|
| The QT Series from Maury Microwave are Calibration-Grade Metrology Quick-Test Adapters that operate from DC to 50 GHz. They have a quick-connect design that enables a push-on/pull-off capability. These adapters are available in configurations with a quick 1-1/2 turn twist 3/8" or 9/16" diameter nut that allows quick connect or disconnect with the increased accuracy of a thread-on connector. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-band Cellular IoT/Satellite Modules from 450 MHz to 2.46 GHz | |
Cellular Module
from u-blox AG
|
| The UBX-R52/S52 Series from u-blox are Multi-band LTE-M/NB-IoT/Satellite Modules that operate in 3GPP cellular bands from 450 MHz to 2.46 GHz and 1.5 to 1.7 GHz (L-band) for satellite connectivity. They support 3GPP Release 13 Cat NB1, Release 14 Cat M1, and Release 14 Cat NB2 protocols along with IDP satellite protocol for the Orbcomm GEO satellite constellation. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1575 MHz GPS Ceramic Patch Antenna | |
GPS/GNSS Antenna
from KYOCERA AVX
|
| The 9003160 from Kyocera AVX is a GPS Ceramic Patch Antenna that operates at 1575 MHz (L1 Band). It has been designed to eliminate design fees, cycle time and optimizes antenna size, performance, and emissions to enable faster time-to-market. This RHCP-polarized antenna provides a gain of 1.0 dBic and has a return loss of 6 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5 GHz Integrated Front-End Module for Wi-Fi 7 Applications | |
Front End Module
from Skyworks Solutions
|
| The SKY85797-11 from Skyworks Solutions is a 5 GHz Wi-Fi 7 (802.11be) Front-End Module (FEM). It consists of a transmit/receive switch, a high-gain low noise amplifier (LNA) with bypass, a power amplifier (PA), a logarithmic power detector, and a coupler. This front-end module has fully-matched input and output ports within the module. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4/5 GHz Wi-Fi 6 Low Power Module | |
RF Module
from Raytac
|
| The AN7002Q-P from Raytac is a 2.4/5 GHz Wi-Fi Module that is compatible with IEEE 802.11ax (also known as Wi-Fi 6) and with earlier standards IEEE 802.11 a/b/g/n/ac. This module is designed for IoT applications and is ideal for adding modern Wi-Fi 6 capabilities to existing Bluetooth® Low Energy, Thread®, or Zigbee® systems. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Ka-Band Block Upconverter from 27.5 to 30.0 GHz | |
Block Up Converter
from ACORDE
|
| The ACCVT-LKa-E28-V4 from Acorde is a Ka-Band Block Upconverter that converts an input frequency of 950 to 2450 MHz to an output frequency of 27.5 to 30.0 GHz. It delivers an output P1dB of more than +10 dBm and a gain of 35 dB. This block upconverter has a noise figure of less than 15 dB and a group delay of less than 1 ns pp over 80 MHz. |
| |
Download Datasheet
Product Details | |
|
|
|
| Portable Analog Signal Generator from 9 kHz to 12/20/26 GHz | |
Signal Generator
from Keysight Technologies
|
| The AP5002A from Keysight Technologies is a Portable Analog Signal Generator that operates from 9 kHz to 12/20/26 GHz. It is designed to accelerate the testing and characterization of electronic or wireless modules either on-site or where the devices are located. This compact signal generator delivers an output power from -120 dBm to +23 dBm and has a frequency step size of 0.001 Hz. |
| |
Download Datasheet
Product Details | |
|
|
|
| Q/V Band Waveguide Termination from 33 to 40 GHz | |
Waveguide Termination
from Narda-MITEQ
|
| The 22-920-6R from Narda MITEQ is a Waveguide Termination that operates from 33 to 40 GHz (Q/V Band). It can handle an input power of 0.25 W and has a VSWR of less than 1.07:1. This termination has a gold-plated aluminum housing that measures 1.13 x 1.56 inches and has a WR22 waveguide interface (UG-383/U flange). |
| |
Download Datasheet
Product Details | |
|
|
|
| 60 W Dual Triplexer from 1695 to 5925 MHz | |
Triplexer
from Microlab
|
| The BK-3104T from Microlab is a Dual Triplexer that operates from 1850 – 1995 MHz, 1695 – 2200 MHz and 2305 to 5925 MHz. It has been designed to allow efficient combining or splitting of standard cellular bands and shared bands such as PCS/AWS with WCS, 2.5/BRS, or C-Band for 5G carrier aggregation in DAS & small cells in a 2×2 MIMO format. |
| |
Download Datasheet
Product Details | |
|
|
|
| AEC-Q100 Qualified Reflective SPDT Switch from 5 to 8500 MHz | |
RF Switch
from BeRex, Inc.
|
| The BSW7221V is a reflective SPDT RF switch that operates from 5 to 8500 MHz. This AEC-Q100 Grade 2 qualified switch is designed for automotive, WLAN 802.11 a/b/g/n/ac/ax/be Networks, Bluetooth, Ultra-Wide-Band (UWB), and wireless communication applications. It has an insertion loss of less than 0.81 dB, an isolation of more than 21 dB, and a switching time of 135 ns. |
| |
Download Datasheet
Product Details | |
|
|
|
| Microwave Fiber Optic Transmitters from DC to 22 GHz | |
RF Over Fiber Module
from Microwave Photonic Systems
|
| The MP-9000-22 Series from Microwave Photonic Systems are Microwave Fiber Optic Transmitters that operate from DC to 22 GHz. These transmitters are the next-generation of RF-over-Fiber (RFoF) electrical-to-optical (E/O) transducers intended to carry optical signals via single mode fibers over distances of more than 100 km. |
| |
Download Datasheet
Product Details | |
|
|
|
| Dual-Duplexed Tower Top Amplifier from 794-806 MHz and 764-776 MHz | |
Tower Mount Amplifier
from TX RX Systems
|
| The 438-83B-23005 from TX RX Systems is a Dual Duplexed Tower Top Amplifier (TTA) that operates from 794 to 806 MHz (uplink) and 764 to 776 MHz (downlink). This TTA is built to withstand harsh conditions. It consists of Tx/Rx filters, a low noise amplifier (LNA), and lightning protection. On the downlink, it can handle an input power of up to 400 W, has an insertion loss of less than 0.7 dB, and a return loss of 18 dB. |
| |
Download Datasheet
Product Details | |
|
