1. everything RF
  2. RF Newsletters
more
PREV 13 April, 2016 NEXT

New RF & Microwave Products this Week - 13 April, 2016

13 April, 2016 - everything RF Newsletter
 
everything RF
Date: 13 April, 2016
 
Sponsored by Inmet (API Technologies)
 
 
 
New RF & Microwave Products this Week
RF Mixer
400 to 3800 MHz, Dual Channel Down-converting Mixer

RF Mixer from Integrated Device Technology

The F1192 is a dual channel wideband down-converting mixer with an RF Frequency from 400 MHz to 3800 MHz and IF Range from 50 MHz to 600 MHz. It has configurable-gain operation from 2 dB to 11 dB for use in a wide array of radio card applications, including 2G-to-5G multimode remote radio units, backhaul systems, and public safety infrastructure.
 
Download Datasheet | Product Details
 
RF Amplifier
X-Band Power Amplifier from 7.9 to 8.4 GHz

RF Amplifier from ERZIA

The ERZ-HPA-0790-0840-37-E is a High Power Amplifier that operates from 7.9 GHz to 8.4 GHz. This X-Band amplifier provides an output power of 37 dBm and a gain of 36 dB. It requires a 34 V supply and draws 1125 mA of current.
 
Download Datasheet | Product Details
 
RF Transistor
RF Power LDMOS Transistor for Radar Applications

RF Transistor from NXP Semiconductors

The MMRF1312H is a RF power LDMOS Transistor that operates from 900 MHz to 1215 MHz. The devices are suitable for use in pulse applications with large duty cycles and long pulses and are ideal for use in high power military and commercial L--Band radar applications such as IFF and DME/TACAN. It can provide a peak power output of 1615 Watts with a gain of 15 dB and efficiency over 50%.
 
Download Datasheet | Product Details
 
RF Module
Ultra Low Power Bluetooth Smart Module

RF Module from Bluegiga

The Blue Gecko SoC from Silicon Labs is an ultra-low-power Bluetooth Smart module. It supports the Bluetooth v4.2 specification and has an integrated Balun and Power Amplifier. The module has excellent receive sensitivity of -94 dBm and a programmable output power of 19.5 dBm.
 
Download Datasheet | Product Details
 
RF Amplifier
1200 to 1700 MHz Low Noise Amplifier

RF Amplifier from Mini Circuits

The ZHL-1217MLN from Mini Circuits is a low noise amplifier that operates from 1200 MHz to 1700 MHz. It provides a gain up to 30 dB, P1dB of 20 dBm, has TOI of 34 dBm and a noise figure of under 1.5 dB.
 
Download Datasheet | Product Details
 
RF Amplifier
Multiband Power Amplifier Module for 3G/LTE

RF Amplifier from Skyworks

The SKY77651-11 from Skyworks is a multimode multiband (MMMB) power amplifier module that supports 3G/4G handsets and operates efficiently in CDMA, WCDMA, and LTE modes. The module has seven outputs and is fully programmable through a Mobile Industry Processor Interface (MIPI).
 
Download Datasheet | Product Details
 
Sponsored by Inmet (API Technologies)
Inmet (API Technologies)
Meet the New Magic Number for 2 Watt Temperature Variable Attenuators
Push the limits of frequency without sacrificing performance. Aeroflex/Inmet’s new DC to 12 GHz Powerfilm surface mount attenuators vary with temperature and are the perfect balance of price, power, and dependability. To learn more, download the data sheet.
 
 
 
Up Converter
Microwave Up-converter with 6 to 24 GHz Output Frequency

Up Converter from Analog Devices

The ADRF6780 is a microwave upconvertor with an output frequency of 5.9 to 23.6 GHz and input ID frequency from 0.8 GHz to 3.5 GHz. This wideband microwave up-converter has been optimized for point to point microwave radio designs, radars and electronic warfare systems.
 
Download Datasheet | Product Details
 
Vector Network Analyzer
2 Port Network Analyzer from 100 MHz to 3 GHz

Vector Network Analyzer from Keysight Technologies

The E5061B series of network analyzers from Keysight operate from 100 MHz to 1.5 GHz/3 GHz. They are optimized for testing simple RF passive components, such as Antenna/Coil/RFIDs, RF cables and filters. These two port analyzer are available with both 50 ohm and 75 ohm connectors.
 
Download Datasheet | Product Details
 
Signal Generator
3/6 GHz RF Signal Generators

Signal Generator from Saluki Technology

The S1101 Series of Signal Generators from Saluki are available in two frequency configurations 250 KHz to 3/6 GHz. These RF signal generators can generate a signal with a power of -135 dBm to 7 dBm with a very low phase noise.
 
Download Datasheet | Product Details
 
Balun
Ceramic Balun from 625 to 2815 MHz

Balun from Johanson Technology

The 1720BL15B0050 from Johanson Technology is a wideband ceramic balun that operates from 628 to 2815 GHz. It has a 1:1 Impedance ratio with an unbalanced/balanced port impedance of 50 Ohms. The balun has an insertion loss of 1.5 dB, return loss of 9.5 dB and can handle up to 2 W of power.
 
Download Datasheet | Product Details
 
RF Switch
SP5T PIN-Diode Switch from 2 GHz to 20 GHz

RF Switch from UMCC

The SW-P010-5S from UMCC is a SP5T absorptive PIN-Diode Switch that operates from 2 GHz to 20 GHz. It has an insertion loss up to 3.5 dB, an isolation of 70 dB and a VSWR under 1.9:1. The switch can handle up to 24 dBm of average CW power and peak power up to 8 Watts with a rise/fall time of 25 ns.
 
Download Datasheet | Product Details
 
Fixed Attenuator
DC to 40 GHz Fixed Attenuators from 1 to 30 dB

Fixed Attenuator from JFW Industries

The 50HFAH-XX are fixed attenuators that operates from DC to 40 GHz. They are available in multiple attenuation configurations from 1 to 30 dB (2, 3, 6, 10, 20 and 30 dB). The Attenuators can handle up to 0.5 watts of average power and have a VSWR of 1.4:1.
 
Download Datasheet | Product Details
 
RF Amplifier
Wideband Low Noise Amplifiers from 1 GHz to 26.5 GHz

RF Amplifier from KMIC Technology

This range of ultra wideband low noise amplifiers from KMIC Technology operates from 1 GHz to 26.5 GHz. They provide an output power (P1dB) of 31 dBm, a gain of over 34 dB and a noise figure under 4 dB. The amplifiers have an internal regulator with reverse polarity protection.
 
Download Datasheet | Product Details
 
RF Test Set
Test Set for Smartphone Production Lines

RF Test Set from Rohde & Schwarz

The R&S CMW100 is a multi-technology solution for calibrating and verifying mobile phones with a frequency range up to 6 GHz. It is ideal for use in fully automated robotic production lines. This device can test up to eight antennas in parallel, can be installed vertically or horizontally with an open architecture that quickly integrates the latest computer technologies.
 
Download Datasheet | Product Details
 
RF Amplifier
10 kW S-Band GaN based Solid State Pulse Amplifier

RF Amplifier from Advantech Wireless

The Advantech Wireless Model APRA-S10000A is a GaN based S-Band solid-state pulse amplifier that operates from 2.7 – 2.9 GHz. The amplifier provides a peak power of up to 10,000 Watts. This GaN based SSPA for Radars exhibit very high spectral purity, linearity, and low phase noise.
 
Download Datasheet | Product Details
 
Front End Module
Tx-Rx Front-End Module for Quad-Band Cellular Handsets

Front End Module from Skyworks

The SKY77927-11 from Skyworks is a front end module that integrates a complete power amplifier and switching solution for 2G/3G/4G cellular handsets. The FEM supports GSM, GPRS, EDGE multi-slot operation, TD-SCDMA and TDD LTE standards.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.